Filter Fitting, Filter Plug, Modified AN314 product photo Primary L

Filter Fitting, Filter Plug, Modified AN314

Introduction

PAC Filter Fittings incorporate a permanently mounted filter element within its body.  This allows replacement of a standard fitting with a Last Chance Filter to protect each contaminant-sensitive component.

Specifications

  • Available in unions, tees, elbows--virtually any size or configuration required
  • Rigimesh® sintered woven wire cloth material -- no media migration
  • Excellent flow vs. delta p characteristics
  • No system modifications required
  • Direct replacement of standard fittings
  • Wide variety of material available
  • Proprietary Design


* Required
Need Help?
Description
Introduction

PAC Filter Fittings incorporate a permanently mounted filter element within its body.  This allows replacement of a standard fitting with a Last Chance Filter to protect each contaminant-sensitive component.

Specifications

  • Available in unions, tees, elbows--virtually any size or configuration required
  • Rigimesh® sintered woven wire cloth material -- no media migration
  • Excellent flow vs. delta p characteristics
  • No system modifications required
  • Direct replacement of standard fittings
  • Wide variety of material available
  • Proprietary Design
Specifications
PALL AEROPOWER P/N 20535---
FILTER FITTING, FILTER PLUG, MODIFIED AN314





-
Size

T
Thread

Ø A

Ø B
± .015

D
+ .015
- .047


E

Ø F
+ .002
- .003

S
+ .015
- .000

- 2 .3125-24 .062 .219 .547 .563 ± .004  .250 .063
- 3 .3750-24 .125 .281 .563 .625 ± .004  .313 .063
- 4 .4375-20 .171 .344 .625 .688 ± .004  .364 .075
- 5 .5000-20 .234 .406 .625 .750 ± .004  .427 .075
- 6 .5625-18 .296 .469 .719 .813 ± .004  .482 .083
-
- 8 .7500-16 .390 .625 .781 1.000 ± .004  .660 .094
- 10 .8750-14 .484 .750 .781 1.125 ± .005  .773 .107
- 12 1.0625-12 .609 .938 1.000 1.375 ± .005  .945 .125
- 16 1.3125-12 .843 1.188 1.000 1.625 ± .016  1.195 .125
- 20 1.6250-12 1.078 1.500 1.000 1.875 ± .016  1.507 .125
1
- 24 1.8750-12 1.312 1.719 1.000 2.125 ± .020 1.756 .125
- 28 2.2500-12 1.546 2.094 1.000 2.500 ± .020  2.131 .125
- 32 2.5000-12 1.781 2.344 1.000 2.750 ± .020  2.381 .125


  MICRON RATING (NOMINAL)

CODE              Liquid Service Gas Service
Nominal  µm
Rating
Absolute µm
Rating
Nominal µm
Rating
Absolute µm
Rating
2 2 15 1 9
5 5 18 3.5 13
10 10 25 6 18
17 17 45 11 25
40 40 70 30 55
70 70 105 50 85
105 105 150 85 130
145 140 205 120 175
250 250 260 250

260

NOTES AND SPECIFICATIONS:
  •  FIRST MODIFIER SPECIFIES PLUG MATERIAL:
            "C" FOR STAINLESS STEEL (AISI) TYPE 300 SERIES CRES.
            "A" FOR ALUMINUM ALLOY (WITH ANODIZE FINISH).
     SECOND MODIFIER SPECIFIES SIZE PER AN814.
     THIRD MODIFIER SPECIFIES NOMINAL MICRON RATING (SEE FILTRATION TABLE)
       4.   FILTER MEDIUM:  RIGIMESH® SINTERED STAINLESS STEEL WOVEN WIRE MESH AISI TYPE 300 SERIES, CRES.
    Type
    Assemblies, Cartridges and Elements
    Use
    Filtration
    Application
    Last Chance Filters, Last Chance Filters, Last Chance Filters, Last Chance Filters, Last Chance Filters, Last Chance Filters, Last Chance Filters, Last Chance Filters, Last Chance Filters, Last Chance Filters, Last Chance Filters, Last Chance Filters, Last Chance Filters
    Segment
    Commercial - Fixed Wing
    Commercial - Rotary Wing
    Military - Fixed Wing
    Military - Rotary Wing
    Military - Vehicles