Laser Drilled Products: Filter Fitting, 75 Micron product photo  L

Laser Drilled Products: Filter Fitting, 75 Micron

Laser Drilled LCFs

 

 



Need Help?
Ask a Question
* Required

Description

Laser Drilled LCFs

 

 

Specifications

PALL AEROPOWER P/N: 3CR0478
FILTER FITTING, 75 MICRON

NOTES AND SPECIFICATIONS:

  1. FILTRATION:  75 MICRON NOMINAL
  2. EFFECTIVE FILTER AREA:  0.45 SQ. IN. MINIMUM.
  3. ELEMENT COLLAPSE PRESSURE:  3000 PSID MINIMUM
  4. CONSTRUCTION:  FILTER ELEMENT IS SPIN-SWAGED INTO FITTING
  5. MATERIAL:
    FITTING:  17-4 PH CRES HEAT TREATED TO H1025 CONDITION
    ELEMENT:  15-5 PH CRES HEAT TREATED TO H1025 CONDITION
    BOTH ITEMS TO BE PASSIVATED IAW ASTM-A-967
       OR AN EQUIVALENT PROCESS
  6. PRESSURE RATING:  OPERATING: 3000 PSIG  BURST:  7500 PSIG
  7. CLEAN PRESSURE DROP FLOWING 2.0 GPM OF SKYDROL 500B AT 80°F: 20 PSID MAXIMUM. (CALCULATED)
  8. TEMPERATURE RANGE: -85°F TO 160°F.
  9. STRUCTURAL REQUIREMENTS:  (DESIGN)
    IMPULSE PRESSURE: 100,000 CYCLES MINIMUM AT 0-4500 PSI -0 AT 225°F± .20°F.
    APPLIED TORQUE: 130 IN-LBS MINIMUM (FITTING ONLY).

Type

Last Chance Filter Elements

Use

Filtration