Duo-Fine® P Series Filter Cartridges product photo Primary L

Duo-Fine® P Series Filter Cartridges

High Surface Area Pleated Cartridges With Polyester Hardware

  • High surface area pleated cartridges combine excellent retention characteristics with high contaminant-holding capacity
  • Polyester hardware provides excellent compatibility
  • Available in retention ratings of 0.2 to 50 μm
  • Thermal bonding eliminates epoxy potting, adhesives and glues
  • Manufactured under ISO 9001 quality system


Need Help?
Ask a Question
* Required

Documents

Datasheets

Download: English

Description

High Surface Area Pleated Cartridges With Polyester Hardware

  • High surface area pleated cartridges combine excellent retention characteristics with high contaminant-holding capacity
  • Polyester hardware provides excellent compatibility
  • Available in retention ratings of 0.2 to 50 μm
  • Thermal bonding eliminates epoxy potting, adhesives and glues
  • Manufactured under ISO 9001 quality system

Specifications

Materials of Construction

 
Filter media:  
50 μm: Spunbonded polyester
All other grades: Borosilicate microfiberglass with acrylic binder
Support material: Polyester
Hardware: Polyester
Sealing: Thermal bond
Gaskets/O-rings: Fluorocarbon elastomer, nitrile, hydrocarbon rubber, silicone elastomer, FEP encapsulated silicone
 

Dimensions (nominal)

 
Outside Diameter: 6.4 cm (2.5 in.)
Lengths (tip-to-tip): 25.4 cm (10 in.), 50.8 cm (20 in.), 76.2 cm (30 in.), 78.5 cm (30.9 in.), 101.6 cm (40 in.)
 

Particle Retention (μm)

 
Cartridge Designation Liquid Service (by ASTM F-795 Test) Gas Service
90% Efficiency >99.9% Efficiency Removal Efficiency by DOP Test
DFPT 0.2 0.2 1.0 99.999%
DFPT 0.45 0.45 2.0 99.998%
DFPT 1 1.0 4.0 96%
DFPT 3 3.0 10.0 ------------
DFPT 10 10.0 18.0 ------------
DFPT 30 30.0 45.0 ------------
DFPT 50 50.0 65.0 ------------
 

Duo-Fine P Series filter cartridges have been extensively laboratory and field tested to determine removal efficiencies in the most stringent of operating conditions.

The removal rating of any filtration device will depend on, to some extent, the conditions under which it is used or tested. The test results will be influenced by the nature of the fluid, its viscosity, the flow rate, the type of contaminant, and the temperature.

The ratings given above represent the diameter of the largest hard spherical particle that will pass through the filter during standard test. Consult Pall for a complete description of Pall's test procedures.

Typical Flow vs. Differential Pressure for Application Sizing

Typical Flow vs. Differential Pressure for Application
Flow rate is for a 25.4 cm (10 in) cartridge. For liquids other than water, multiply differential pressure by fluid viscosity (cP).

Performance

Filter grades

  • 0.2, 0.45, 1, 3, 10, 30, 50 μm

Recommended change-out differential pressure1

  • 2.4 bard (35 psid)

Maximum differential pressure

  • 5.2 bard (75 psid) @ 20 °C (68 °F)
  • 2.8 bard (40 psid) @ 93 °C (200 °F)

Maximum operating temperature2

  • 93 °C (200 °F)
1 Provided that the maximum differential pressure is not exceeded based on temperature limits defined above.
2 With compatible fluids.

Type

Filter Cartridges

Ordering Information

Pall Part Number = DFPT [1] - [2] E [3] - [4]

Table 1

 
Code Filter grades (μm)
0.2 0.2
0.45 0.45
1 1
3 3
10 10
30 30
50 50
 

Table 2

 
Code Cartridge lengths (cm/ in.) nominal
10 25.4/10
20 50.8/20
30 76.2/30
30.9 78.5/30.9
40 101.6/40
 

Table 3

 
Code Gasket/O-ring materials
S Silicone
N Nitrile
E Hydrocarbon rubber
V Fluorocarbon elastomer
T FEP encapsulated silicone (O-rings)
 

Table 4

 
Code End configurations
DOE DOE with elastomer gasket seals & end caps
M3 SOE flat closed end, external 222 O-rings (retrofits other manufacturers’ Code 0)3
M8 SOE fin end, external 222 O-rings (retrofits other manufacturers’ Code 5)3
 
3 For details, contact Pall Corporation.

Reviews

Earn 10% off* your next order online by leaving a review of this product. Please login to your account to leave a review. We appreciate and value your feedback.

*Subject to Terms and Conditions.