FBT Series Filter Housings - 5 Round product photo Primary L

FBT Series Filter Housings - 5 Round

Specifically Designed for Liquid Filtration

The FBT Series 5 Round Filter Housings are specifically designed for liquid filtration in the food and beverage industry1.

  • Enhanced cleanability and microbiological safety due to crevice-free, polished and hygienic design
  • Corrosion resistance and durability with 316L stainless steel wetted parts and high-quality welds
  • Cost-effective without sacrificing quality and performance

FBT 5 Round Filter Housings are available in a standard sanitary design that allows a variety of connection options or a 3-A sanitary design, which meets the requirements of 3-A Sanitary Standards #10-04.

Features and benefits

  • T-style multi-round housing
  • Suitable for flow rates up to 378 liters/min (100 USgpm) depending upon cartridge type and size
  • Suitable for CIP and SIP
  • Beveled housing tubesheet and aseptic-style housing seal provides enhanced drainability and a crevice-free connection between the housing head and bowl
  • Electropolished head and elbows and mirror-polished bowl ensures optimal cleanability in critical areas while maintaining cost-effectiveness
  • The new cartridge locking design features additional cut-outs to traditional half-moon portions of the Code 7 bayonet locks, enhancing cleanability and drainability

    FBT Series sanitary housings New cartridge locking design
  • Operator-friendly V-Band housing closure simplifies handling
  • Housings with clamp coupling and butt weld connection options meet the design requirements of 3-A Sanitary Standards #10-04
  • Design satisfies EC Pressure Equipment Directive (PED) 97/23/EC, ATEX 94/9/EC Group II Category 2


Contact Us
* Required

Documents

Datasheets

Download: English

Description

Specifically Designed for Liquid Filtration

The FBT Series 5 Round Filter Housings are specifically designed for liquid filtration in the food and beverage industry1.

  • Enhanced cleanability and microbiological safety due to crevice-free, polished and hygienic design
  • Corrosion resistance and durability with 316L stainless steel wetted parts and high-quality welds
  • Cost-effective without sacrificing quality and performance

FBT 5 Round Filter Housings are available in a standard sanitary design that allows a variety of connection options or a 3-A sanitary design, which meets the requirements of 3-A Sanitary Standards #10-04.

Features and benefits

  • T-style multi-round housing
  • Suitable for flow rates up to 378 liters/min (100 USgpm) depending upon cartridge type and size
  • Suitable for CIP and SIP
  • Beveled housing tubesheet and aseptic-style housing seal provides enhanced drainability and a crevice-free connection between the housing head and bowl
  • Electropolished head and elbows and mirror-polished bowl ensures optimal cleanability in critical areas while maintaining cost-effectiveness
  • The new cartridge locking design features additional cut-outs to traditional half-moon portions of the Code 7 bayonet locks, enhancing cleanability and drainability

    FBT Series sanitary housings New cartridge locking design
  • Operator-friendly V-Band housing closure simplifies handling
  • Housings with clamp coupling and butt weld connection options meet the design requirements of 3-A Sanitary Standards #10-04
  • Design satisfies EC Pressure Equipment Directive (PED) 97/23/EC, ATEX 94/9/EC Group II Category 2

Specifications

Minimum / Maximum Operating Pressure2

  • -1 to 10 bar (-14.5 to 150 psig)

Minimum / Maximum Operating Temperature3, 5

  • Fluorocarbon Elastomer and Silicone seals -10 to 150 °C (14 to 300 °F)
  • EPR seals -10 to 121 °C (14 to 250 °F)

Steam Sterilization3, 5

  • Fluorocarbon Elastomer and Silicone seals 3.7 bar / 150 °C max (53 psig / 300 °F)
  • EPR seals 1 bar / 121 °C max (14.5 psig / 250 °F)

Materials of Construction

  • Wetted parts 316L stainless steel

Housing Seal Options1, 4

  • Fluorocarbon Elastomer
  • Silicone
  • EPR

Surface Finish

  • <0.8 micron Ra (<32 Ra microinches)

Connections

  • DIN 11851
  • Clamp Coupling
  • Butt Weld

Filter CartridgeCompatibility5

  • Pall Code 2 or Code 7 single open-end

Design Specification

  • Design capability of 4 times maximum operating pressure. Each housing is hydrostatically tested to 1.6 times maximum

FBT05 and FBT05 3-A Series Housings Nominal Dimensions in mm (inches)

 
Code Cartridge Height A B1 - FBT05 B2 - FBT05 (3-A) C - Element Removal D - DIN Connection D - Clamp Connection D - Butt Weld Connection
10 254 (10) 893.5 (35.2) 603 (23.7) 631 (24.8) 310 (12.2) 370 (14.6) 381 (15) 370 (14.6)
20 508 (20) 1143.5 (45.0) 854 (33.6) 882 (34.7) 560 (22.0) 370 (14.6) 381 (15) 370 (14.6)
30 762 (30) 1392.5 (54.8) 1102 (43.4) 1130 (44.5) 807.5 (31.8) 370 (14.6) 381 (15) 370 (14.6)
40 1016 (40) 1641.5 (64.6) 1351 (53.2) 1379 (54.3) 1057 (41.6) 370 (14.6) 381 (15) 370 (14.6)
 
For specific dimensions, please contact Pall

FBT Series Filter Housings FBT05 Standard Housing
FBT05 Standard Housing e.g. Part No. FBT05*GNW50J

FBT05 3-A Series Housing
FBT05 3-A Series Housing e.g. Part No. FBT05*G31LH43A

Typical Water Flow / Pressure Drop Characteristics6


FBT05 3-A Series Housing Typical Water Flow / Pressure Drop Characteristics

Volume and Weight

 
Code Volume L (US Gal) Weight kg (lb)
10 13.7 (3.6) 26.9 (59.0)
20 22.7 (6.0) 29.1 (64.1)
30 31.8 (8.4) 30.4 (66.8)
40 40.9 (10.8) 33.6 (73.9)
 

1Please contact Pall to ensure the products meet specific National Legislation and/or Regional Regulatory requirements for food contact use.
2Maximum operating pressure ratings are vessel ratings only. Safe operating temperature and pressure will depend on filter cartridge and seal used. For compatibility details, please contact Pall.
3For applications involving fluids below 0 °C (32 °F), please contact Pall.
4Check local pressure vessel code requirements.
5Refer to Pall Food and Beverage filter cartridge literature for additional guidelines on use.

Type

Housings, Vessels, or Assemblies

Ordering Information

This is a guide to the part numbering structure and possible options only. For availability of specific options, please contact Pall.

Example Part Number: FBT 05 131 H4 3A (See bold references in tables below.)

Part Number: FBT 05<Cartridge Height Code from Table 1> G <Inlet/Outlet Code from Table 2><Housing Seal Option from Table 3> <Housing Design Code from Table 4>

< INLET Code from Table Outlet 2 >< HOUSING from Table Seal Option 3 >< HOUSING Code from Table Design 4 >

Table 1 - Cartridge Height

 
Code Cartridge Height
1 254 mm (10")
2 508 mm (20")
3 762 mm (30")
4 1016 mm (40")
 

Table 2 - Inlet/Outlet

 
Code Inlet / Outlet Vent Drain
NW50 NW50 DIN 11851 NW25 DIN 11851 NW15 DIN 11851
31 2" Clamp Coupling 1" Clamp Coupling 1/2" Clamp Coupling
346 Butt Weld 50.8 x 1.6 Butt Weld 25.4 x 1.6 Butt Weld 12.7 x 1.6
 

Table 3 - Housing Seal

 
Code Housing Seal Options
H Fluorocarbon Elastomer
H4 Silicone
J EPR
 

Table 4 - Housing Design

 
Code Housing Design
Blank Standard
3A 3-A Series
 

Note: Housings with clamp coupling and butt weld connection options are available in both Standard and 3-A Series design. Housings with DIN connections are only available in Standard design.

Spare Parts




 
Description Quantity Material Part No.
Bowl seal [2] 1 H ORHPW-676
Bowl seal [2] 1 H4 ORH4PW-676
Bowl seal [2] 1 J ORJPW-676
2" Clamp seal [4] 2 H LS00167
2" Clamp seal [4] 2 H4 LS00100
2" Clamp seal [4] 2 J LS00101
Retaining plate [3] 1 316L s/s ACS0919AA
Clamp plate and bolts (std) [5] 1 304 s/s CC67520
Bowl clamp (std) [1] 1 304 s/s ACS0922DM
Bowl clamp [1]  (3-A Series) 1 304 s/s ACS0924DM
2" V-clamp [5] (3-A Series) 2 304 s/s ACS0382DA
 

Optional Accessories


FBT Series Filter Housings Optional Accessories
Accessories pictured are shown in DIN 11851 option.

 
Description Connections Seal Material Part Number Connections Seal Material Part Number
Vent Kit - Gauge NW25
(DIN 11851)
H
H4
J
ACS0949AM
ACS0950AU
ACS0951AM
1" Clamp Coupling H
H4
J
ACS0958AM
ACS0959AU
ACS0960AM
Vent Kit -Stäubli* - Vent Valve NW25
(DIN 11851)
H
H4
J
ACS0952AM
ACS0953AU
ACS0954AM
1" Clamp Coupling H
H4
J
ACS0961AM
ACS0962AU
ACS0963AM
Vent Kit - Stäubli* Vent Tee NW25
(DIN 11851)
H
H4
J
ACS0946AM
ACS0947AU
ACS0948AM
1" Clamp Coupling H
H4
J
ACS0955AM
ACS0956AU
ACS0957AM
Drain Kit -Hosetail Valve (2 required per housing) NW15
(DIN 11851)
H
H4
J
ACS0929EM
ACS0930EU
ACS0931EM
1/2" Clamp Coupling H
H4
J
ACS0932AM
ACS0933AU
ACS0934AM
 
Connection kits are supplied either with DIN 11851 connection type or clamp coupling type. Please choose the desired option. Seal material options are H (Fluorocarbon Elastomer), H4 (Silicone) and J (EPR).

Reviews

We appreciate your review of this product. Please login to your account to leave a review.