FMO High Flow Series Filter Housings product photo Primary L

FMO High Flow Series Filter Housings

High Flow 316L Stainless Steel Multi-Cartridge Filter Housing for Industrial Applications

  • Accepts 12 or 21, 30 in. (76.2 cm) or 40 in. (102 cm) Filter Cartridges
  • Housing is Designed to Accept DOE, M3 (Code 3) or M8 (Code 8)
  • Style Filter Cartridges
  • 316L Stainless Steel Material of Construction for Corrosion Resistance
  • Swing Bolt Closure Design Assures Secure Sealing and Ease of
  • Change Outs
  • Side-In/Side-Out Design Allows for Easy Piping
  • 150 PSIG (10.3 bar) Maximum Operating Pressure Permits Use in Many Applications
  • 1 in. (2.5 cm) Drain Ports Allow Rapid Evacuation of Vessel


* Required
Need Help?
Download Datasheet
Description

High Flow 316L Stainless Steel Multi-Cartridge Filter Housing for Industrial Applications

  • Accepts 12 or 21, 30 in. (76.2 cm) or 40 in. (102 cm) Filter Cartridges
  • Housing is Designed to Accept DOE, M3 (Code 3) or M8 (Code 8)
  • Style Filter Cartridges
  • 316L Stainless Steel Material of Construction for Corrosion Resistance
  • Swing Bolt Closure Design Assures Secure Sealing and Ease of
  • Change Outs
  • Side-In/Side-Out Design Allows for Easy Piping
  • 150 PSIG (10.3 bar) Maximum Operating Pressure Permits Use in Many Applications
  • 1 in. (2.5 cm) Drain Ports Allow Rapid Evacuation of Vessel
Specifications

Materials of Construction

  • Head: 316L Stainless steel
  • Shell: 316L Stainless steel
  • Connections: 316L Stainless steel
  • Bolting: Zinc Plated Steel

Connections

  • Inlet/Outlet
       12 Around: 3 in. ANSI RF Flange
       21 Around: 4 in. ANSI RF Flange
  • Vent: 1/2 in. NPT
  • Drain: 1 in. NPT 

Shell O-rings

  • EPDM (standard), Buna N, Silicone Elastomer, Viton1A

Maximum Operating Pressure:

  • 50 psig (10.3 bar) @ 200 °F (93 °C)
NOTE: Maximum operating pressure ratings are vessel ratings only. Safe operating temperature and pressure will depend on filter cartridge and gasket/O-ring used. For inquiries on compatibility, contact the factory or your Pall distributor.

Customization

Housings can be engineered to meet the specific needs of the process and installation. Contact your Pall distributor or Technical Services for assistance.

Dimensional Data (Nominal)

Model # Columns Dimensions (inches) A B C D E F Flow Rate2 (gpm) Weight In lbs. (Empty)
36FMO3 12 56
(142.2 cm)
12
(30.5 cm)
31
(78.7 cm)
19
(48.3 cm)
12
(30.5 cm)
16 3/8
(41.6 cm)
180
(681 lpm)
220
(100 kg)
48FMO4 12 66
(167.6 cm)
12
(30.5 cm)
31
(78.7 cm)
19
(48.3 cm)
12
(30.5 cm)
16 3/8
(41.6 cm)
240
(909 lpm)
235
(107 kg)
63FMO3 21 57
(144.8 cm)
16
(40.6 cm)
31
(78.7 cm)
19
(48.3 cm)
12
(30.5 cm)
20 3/4
(52.7 cm)
315
(1192 lpm)
285
(129 kg)
84FMO4 21 67
(170.2 cm)
16
(40.6 cm)
31
(78.7 cm)
19
(48.3 cm)
12
(30.5 cm)
20 3/4
(52.7 cm)
420
(1590 lpm)
305
(138 kg)

Housing Differential Pressure vs. Liquid Flow Rate


1Registered trademark of DuPont Dow.
2For viscosity and specific gravity similar to water.
Type
Filter Housings
Use
Filtration, Prefiltration
Ordering Information
This information is a guide to the part number structure and possible options. For availability of specific options and housing details, please contact Pall.

Example Part Number: 36 FMO 4 -316L -3 F -IP (See bold references in tables below.)

Part Number:  < Equivalents Code from Table 1> FMO <Cartridge Length  Code from Table 2>  -316L -<Connection Sizes Code from Table 3>  F -<Internal Parts Code from Table 4>

Table 1 10 in. Equivalents

Code 1 No. of 10 in. Equivalents
36 36
48 48
63 63
84 84

Table 2 - 10 in. Cartridge Length

Code Cartridge Lengths
3 30 in.
4 40 in.

Table 3 - Connection Sizes

Code Inlet/Outlet Connection Sizes
3 3 in. for 36 and 48
4 4 in. for 63 and 84

Table 4 - Internal Parts

Code Internal Parts3
Blank No Internal Parts
IP Internal Parts

3Standard vessels include internal parts of top seat plates and tube guides. Basic vessels without internal parts may be ordered as non-stock items.
Application
General F&B, Incoming Water, Incoming Water, General F&B