Craft Breweries - FBT Series Filter Housing - Single Round product photo Primary L

FBT Series Filter Housing - Single Round

Single-Round Filter Housing for Sanitary Liquid Filtration

FBT Series sanitary housings are designed specifically for liquid filtration in the food and beverage industry1.
  • Enhanced cleanability and microbiological safety due to crevice-free, polished and hygienic design
  • Corrosion resistance and durability with 316L stainless steel wetted parts and high-quality welds
  • Cost-effective without sacrificing quality and performance


FBT Housings are available in a standard sanitary design allowing a variety of connection options, or in a 3-A sanitary design, which meets the requirements of 3-A Sanitary Standards #10-04.

Features and Benefits

  • Suitable for flow rates up to 91 liters/min (24 USgpm) depending on cartridge type and size
  • Suitable for CIP and SIP 
  • Beveled housing tube sheet and aseptic-style housing seal provides enhanced drainability and a crevice-free connection between the housing head and bowl
  • Electropolished head and elbows and mirror polished bowl ensures optimal cleanability in critical areas while maintaining cost-effectiveness
  • New cartridge locking design features additional cut-outs to traditional half-moon portions of the Code 7 bayonet locks, enhancing cleanability and drainability

  • Operator-friendly V-Clamp housing closure simplifies handling
  • Design satisfies EC Pressure Equipment Directive (PED) 97/23/EC, ATEX 94/9/EC Group II Category 2


Contact Us
* Required

Order Products

FBT Sanitary housing for one cartridge filter - 254 mm (10”)

Product ID: FBT011G23H43A
Unit of Measure
1/EA
Min Order Qty
1
Bowl Clearance
300 mm
Cartridge Lock
Bayonet-Lock
Cartridge Style
AB Code 7
Design Pressure (barg)
-1/10 Barg @ -10/150 T°C
Food Contact Compliant
Yes
Housing Height (Metric)
434 mm
See All Attributes

FBT Sanitary housing for one cartridge filter - 762 mm (30”)

Product ID: FBT013G23H43A
Unit of Measure
1/EA
Min Order Qty
1
Bowl Clearance
800 mm
Cartridge Lock
Bayonet-Lock
Cartridge Style
AB Code 7
Design Pressure (barg)
-1/10 Barg @ -10/150 T°C
Food Contact Compliant
Yes
Housing Height (Metric)
954 mm
See All Attributes

Stand for Single round FBT housings

Product ID: FBT01STAND
Unit of Measure
1/EA
Min Order Qty
1

Documents

Datasheets

Download: Deutsch | English | Portuguese | Russian

Description

Single-Round Filter Housing for Sanitary Liquid Filtration

FBT Series sanitary housings are designed specifically for liquid filtration in the food and beverage industry1.
  • Enhanced cleanability and microbiological safety due to crevice-free, polished and hygienic design
  • Corrosion resistance and durability with 316L stainless steel wetted parts and high-quality welds
  • Cost-effective without sacrificing quality and performance


FBT Housings are available in a standard sanitary design allowing a variety of connection options, or in a 3-A sanitary design, which meets the requirements of 3-A Sanitary Standards #10-04.

Features and Benefits

  • Suitable for flow rates up to 91 liters/min (24 USgpm) depending on cartridge type and size
  • Suitable for CIP and SIP 
  • Beveled housing tube sheet and aseptic-style housing seal provides enhanced drainability and a crevice-free connection between the housing head and bowl
  • Electropolished head and elbows and mirror polished bowl ensures optimal cleanability in critical areas while maintaining cost-effectiveness
  • New cartridge locking design features additional cut-outs to traditional half-moon portions of the Code 7 bayonet locks, enhancing cleanability and drainability

  • Operator-friendly V-Clamp housing closure simplifies handling
  • Design satisfies EC Pressure Equipment Directive (PED) 97/23/EC, ATEX 94/9/EC Group II Category 2

Specifications

Minimum / Maximum Operating Pressure2

  • -1 to 10 bar (-14.5 to 150 psig)

Minimum / Maximum Operating Temperature3,5

  • Fluorocarbon Elastomer and Silicone seals -10 to 150 °C (14 to 300 °F) EPR seals -10 to 121 °C (14 to 250 °F)

Steam Sterilization3,5

  • Fluorocarbon Elastomer and Silicone seals 3.7 bar / 150 °C max (53 psig / 300 °F) EPR seals 1 bar / 121 °C max (14.5 psig / 250 °F)

Materials of Construction

  • Wetted parts 316L stainless steel

Housing Seal Options1, 4

  • Fluorocarbon Elastomer
  • Silicone
  • EPR

Surface Finish

  • < 0.8 micron Ra (< 32 Ra microinches)

Connections

  • DIN 11851
  • Clamp Coupling
  • Butt Weld

Filter Cartridge Compatibility5

  • Pall Code 2 or Code 7 single open-end

Design Specification

  • Design capability of 4 times maximum operating pressure. Each housing is hydrostatically tested to 1.6 times maximum

Nominal Dimensions in mm (inches)

 
Code Cartridge Height A DIN Connec-
tion
A Clamp Connec-
tion
A Butt Weld Connec-
tion
B Element Removal C DIN Connec-
tion
C Clamp Connec-
tion
C Butt Weld Connec-
tion
05 127 (5) 316.5 (12.5) 309.1 (12.2) 302 (11.9) 180 (7.1) 230 (9.1) 215 (8.5) 173 (6.8)
1 254 (10) 441.5 (17.4) 434.1 (17.1) 427 (16.8) 300 (11.8) 230 (9.1) 215 (8.5) 173 (6.8)
2 508 (20) 701.5 (27.6) 694.1 (27.3) 687 (27.0) 550 (21.7) 230 (9.1) 215 (8.5) 173 (6.8)
3 762 (30) 961.5 (37.9) 954.1 (37.6) 947 (37.3) 800 (31.5) 230 (9.1) 215 (8.5) 173 (6.8)
 

For specific dimensions, please contact Pall.

Typical Water Flow / Pressure Drop Characteristics6

Volume and Weight

 
Code Volume L (US gal) Weight kg (lb)
05 1.4 (0.37) 3.4 (7.5)
1 2.4 (0.63) 3.9 (8.6)
2 4.4 (1.16) 5.0 (11.0)
3 6.3 (1.66) 6.0 (13.2)
 

1Please contact Pall to ensure the products meet specific National Legislation and/or Regional Regulatory requirements for food contact use.
2Maximum operating pressure ratings are vessel ratings only. Safe operating temperature and pressure will depend on filter cartridge and seal used. For compatibility details, please contact Pall.
3For applications involving fluids below 0 °C (32 °F), please contact Pall.
4Check local pressure vessel code requirements.
5Refer to Pall Food and Beverage filter cartridge literature for additional guidelines on use.

Type

Housings, Vessels, or Assemblies

Ordering Information

This is a guide to the part numbering structure and possible options only. For availability of specific options, please contact Pall.

Example Part Number: FBT 01 1 G NW25 J(See bold references in tables below.)

Part Number: FBT < Cartridge Height Code from Table 1 > G < Inlet/Outlet Code from Table 2 >< Housing Seal Option from Table 3 > < Housing Design Code from Table 4 >

Table 1 - Cartridge Height

 
Code Cartridge Height
05 127 mm (5 in.)
1 254 mm (10 in.)
2 508 mm (20 in.)
3 762 mm (30 in.)
 

Table 2 - Inlet/Outlet

 
Code Inlet / Outlet Vent Drain
NW25 NW25 DIN 11851 NW25 DIN 11851 NW15 DIN 11851
23 1" Clamp Coupling 1" Clamp Coupling ½" Clamp Coupling
02 Butt Weld 25.4 x 1.6 Butt Weld 12.7 x 1.6 Butt Weld 12.7 x 1.6
 

Table 3 - Housing Seal

 
Code Housing Seal Options
H Fluorocarbon Elastomer
H4 Silicone
J EPR
 

Table 4 - Housing Design

 
Code Housing Design
Blank Standard
3A 3-A Series
 
Note: Housings with clamp coupling and butt weld connections options are only available in 3-A series design. Housings with DIN connections are only available in standard design. 

Spare Parts

 
Description Standard Design / 3-A Design
Bowl Seal GK1242PH01 (Fluorocarbon Elastomer)
GK1242QL01 (Silicone)
GK1242PX01 (EPR)
Bowl V-Clamp ACS0942DA
 

Optional Accessories


FBT Series Filter Housings Optional Accessories

 
Description Connections+ Seal Material Part Number Connections+ Seal Material Part Number
Vent Kit - Gauge NW25 H
H4
J
ACS0949AM
ACS0950AU
ACS0951AM
1" Clamp Coupling H
H4
J
ACS0958AM
ACS0959AU
ACS0960AM
Vent Kit -Stäubli* - Vent Valve NW25 H
H4
J
ACS0952AM
ACS0953AU
ACS0954AM
1" Clamp Coupling H
H4
J
ACS0961AM
ACS0962AU
ACS0963AM
Vent Kit - Stäubli* Vent Tee NW25 H
H4
J
ACS0946AM
ACS0947AU
ACS0948AM
1" Clamp Coupling H
H4
J
ACS0955AM
ACS0956AU
ACS0957AM
Drain Kit -Hosetail Valve (2 required per housing) NW15 H
H4
J
ACS0929EM
ACS0930EU
ACS0931EM
1/2" Clamp Coupling H
H4
J
ACS0932AM
ACS0933AU
ACS0934AM
Housing stand FBT01STAND
 

+Connection kits are supplied either with DIN 11851 connection type or clamp coupling type. Please choose the desired option. Seal material options are H (Fluorocarbon Elastomer), H4 (Silicone) and J (EPR).

Reviews

We appreciate your review of this product. Please login to your account to leave a review.