SUPRApak™ L-Series-WA Housings product photo Primary L

SUPRApak™ L-Series-WA Housings

SUPRApak L filtration units provide a closed system approach to high capacity depth filtration, maximizing product protection and minimizing product losses. Lower cost of ownership is achieved due to higher throughput, yield improvement, and reduced handling, cleaning, maintenance and downtime costs, when compared to sheet filtration.

SUPRApak L technology is ideal for use in distilled spirits, beer, sweetener, enzyme, gelatin, yeast extract, and other food and beverage applications.

SUPRApak L Series-WA units hold from one to six SUPRApak L modules, representing up to approximately 60 m2 (646 ft2) of filtration area in a very compact and low hold-up volume design. They are available either in single dome or flexible modular design.

SUPRApak L Series-WA housings are designed for use with SUPRApak L filter modules. They revolutionize depth filtration applications in the food and beverage industry, providing a cost-effective alternative to classical sheet filtration.

 
Features Benefits
Closed filtration system • Increased process safety and product quality; minimized product losses, product contamination risk and personnel exposure to process fluids
Compact design with high filtration area • Extremely high throughput at low investment cost
Drainable, low hold-up volume assembly • Higher product yield; minimized cleaning costs
High quality internal surface finish, sanitary and crevice-free design • Enhanced cleanability
Flexible modular design • Production volumes can be matched to equipment capacity; capability for future expansion
External tensioning device with preset torque limit • Provides secure operation without bypass
Dual inlet connections on sizes exceeding 3 modules • Minimizes product mixing zones
Simple, quick installation and servicing • Reduced labor, maintenance and downtime costs
Filter module lifting device available on request • Eases filter installation and removal
ATEX (94/9/EC) Group II, Category 2 documentation (Zones 1/21 and 2/22) • Suitable for use in potentially explosive environments
 


* Required
Need Help?
Download Datasheet
Description

SUPRApak L filtration units provide a closed system approach to high capacity depth filtration, maximizing product protection and minimizing product losses. Lower cost of ownership is achieved due to higher throughput, yield improvement, and reduced handling, cleaning, maintenance and downtime costs, when compared to sheet filtration.

SUPRApak L technology is ideal for use in distilled spirits, beer, sweetener, enzyme, gelatin, yeast extract, and other food and beverage applications.

SUPRApak L Series-WA units hold from one to six SUPRApak L modules, representing up to approximately 60 m2 (646 ft2) of filtration area in a very compact and low hold-up volume design. They are available either in single dome or flexible modular design.

SUPRApak L Series-WA housings are designed for use with SUPRApak L filter modules. They revolutionize depth filtration applications in the food and beverage industry, providing a cost-effective alternative to classical sheet filtration.

 
Features Benefits
Closed filtration system • Increased process safety and product quality; minimized product losses, product contamination risk and personnel exposure to process fluids
Compact design with high filtration area • Extremely high throughput at low investment cost
Drainable, low hold-up volume assembly • Higher product yield; minimized cleaning costs
High quality internal surface finish, sanitary and crevice-free design • Enhanced cleanability
Flexible modular design • Production volumes can be matched to equipment capacity; capability for future expansion
External tensioning device with preset torque limit • Provides secure operation without bypass
Dual inlet connections on sizes exceeding 3 modules • Minimizes product mixing zones
Simple, quick installation and servicing • Reduced labor, maintenance and downtime costs
Filter module lifting device available on request • Eases filter installation and removal
ATEX (94/9/EC) Group II, Category 2 documentation (Zones 1/21 and 2/22) • Suitable for use in potentially explosive environments
 
Applications
SUPRApak L technology is ideal for use in distilled spirits, beer, sweetener, enzyme, gelatin, yeast extract, and other food and beverage applications.
Specifications
 
Minimum/Maximum
Design Pressure 1, 2
Liquids: -1 to 8 barg (-14.5 to 116 psig)
Gases: -1 to 3.5 barg (-14.5 to 50.8 psig)
Minimum/Maximum Operating Temperature1 -10 to 150 °C (14 to 302 °F)
Materials of Construction Wetted parts 1.4404 (AISI 316L stainless steel)
Sealing Materials 3 EPDM elastomer
Internal Surface Finish ≦ 0.8 micrometers Ra ( ≦ 32 Ra microinches ), electropolished
Internal Welds Dressed and blended to provide uniform ripple- and crevice-free surface to ‹ 0.8 micrometers Ra (≦32 Ra microinches), electropolished
Connections Connections Inlet/Outlet DN65 (DIN 11851) 2.5 inch ISO 2852 clamp coupling compatible adaptors available by specific order
Filtrate Vent (optional) DN6 (8 mm / 0.31 inch OD) hose tail
Filter Module Compatibility 4 SUPRApak L series modules
 

1
Maximum design pressure and temperature ratings are vessel ratings only. Safe operation will also depend on filter module and housing gasket use. EPDM assembly seals restrict continuous operating temperature to 130 ºC (266 ºF). For details on module temperature limitations, please refer to SUPRApak module literature.
2
Design satisfies EC Pressure Equipment Directive (PED) 97/23/EC (Fluid Group 2, Category II, Module H). Pressure rating is suitable for non-hazardous liquids or gases. The PED category and fluid group classification indicates suitability of housing use on distilled spirits less than 70% by weight absolute alcohol. For such applications, the maximum allowable temperature must be below the flash point. For 70% by weight absolute alcohol the flashpoint is 21 ºC (69.8 ºF).
3
Seal materials meet requirements for food contact use as detailed in FDA 21 CFR Section 177.2600, and EC Regulation 1935/2004, including BfR XV and XXI. Please contact Pall for additional options.
4
Refer to Pall Food and Beverage SUPRApak module literature for additional guidelines on use.

SUPRApak L Series-WA housings are supplied without standard accessories. A few optional accessories are available.

Nominal Dimensions in mm (inches) —

For specific dimensions, please contact Pall 5.

 
  L-100 L-200
L-210
L-300
L-311
L-320
L-400
L-421
L-430
L-520
L-531
L-630
L-632
A 1337 (52.6) 1827 ( 71.9) 2333 (91.9) 2870 (113) 3604 (141.9) 4113 (161.9)
B 1017 (40) 1277 (50.3) 1537 (60.5) 1798 (70.8) 2058 (81.0) 2318 (91.3)
C 872 (34.3) 1132 (44.6) 1392 (54.8) 1652 (65.0) 1912 (75.3) 2172 (85.5)
D6 320 (12.6) 320 (12.6) 320 (12.6) 320 (12.6) 320 (12.6) 320 (12.6)
E7 314 (12.4) 314 (12.4) 314 (12.4) 314 (12.4) 314 (12.4) 314 (12.4)
F7 160 (6.3) 160 (6.3) 160 (6.3) 160 (6.3) 160 (6.3) 160 (6.3)
G 457.2 (18) 457.2 (18) 457.2 (18) 457.2 (18) 457.2 (18) 457.2 (18)
 

5
Pall Corporation reserves the right to make dimensional modifications at any time, maintaining the same fit, form, and function. Please request a general arrangement drawing if exact dimensions are required.
6
Adjustable (leg height adjustment)
7
Indicated dimensions are for installations requiring DIN connections. For installations requiring clamp coupling connections, an optional DIN to clamp coupling adaptor is additionally available. See Optional Accessories. If adaptors are added to the inlet and outlet connections, add 85.3 mm (3.4 in) for each adaptor to the pipeline length.



Volume and Weight


Standard Documentation8

  • Certificate of Conformity to Quality Standards
  • Final Inspection Certificate
  • Installation/Operating Manual (IOM)
8 Additional documentation packages can be ordered. Please request PPD004BRONZ, PPD004SILVER, or PPD004GOLD.
Type
Housings, Vessels, or Assemblies
Ordering Information

Part Number: SPL WA [Table1 ] [Table 2] [Table 3]
Example Part Number: SPLWA300TWN

Note: See bold reference codes in the tables.

Table 1

 
Code9 Bowl Height and Configuration Number of SUPRApak Modules
100 1-High Bowl 1
200 2-High Bowl 2
210 2-High Split Bowl 1 or 2
300 3-High Bowl 3
311 3-High Split Bowl 1, 2, or 3
320 3-High Split Bowl 1 or 3
400 4-High Bowl 4
421 4-High Split Bowl 1, 2, 3, or 4
430 4-High Split Bowl 1 or 4
520 5-High Split Bowl 3 or 5
630 6-High Split Bowl 3 or 6
632 6-High Split Bowl 1, 3, 4, or 6
 
9 For shortest possible lead times, please choose preferred housing options 100, 210, 311, 421, 522, or 632.

Table 2

 
Code Filtrate Vent Option
TW No vent
TV With vent, DN6 hose tail
 

Table 3

 
Code ATEX Documentation
A ATEX (94/9/EC) Classification: Group II, Category 2, (Zones 1/21 and 2/22) Documentation
N No ATEX Documentation
 

Optional Accessories

 
Part No. Description Details
ACS1035AA Sight Glass DN65 For filtrate side piping
25590-022610 Hot Fluid Core 1.4404 (AISI 316L SS)
25590-0226-0110 Hot Fluid Core Extension Z1 1.4404 (AISI 316L SS)
25590-0226-0210 Hot Fluid Core Extension Z2 1.4404 (AISI 316L SS)
ACS1036AA Hook Spanner DN10-20 Tool
ACS1037AA Hook Spanner DN25-100 Tool
20040118-12 1-2 High Lifting Device Supplied with spacer
20040118-34 3-4 High Lifting Device Supplied with spacer
20040118-56 5-6 High Lifting Device Supplied with spacer
ACS1116AA Maintenance Tool Kit Hook spanners, adjustable torque wrench, torque unit tools
ACS1034GM Inlet/Outlet Adaptor (DN65 – 2 ½ inch clamp coupling) Adaptor for piping adaption from DN to ISO 2852 clamp coupling connection
 

10
For hot fluid filtration (>40 °C/ >104 °F) select Hot Fluid Core for the top module in the stack and add Hot Fluid Core Extension Z1 (1-high section) and/or Hot Fluid Core Extension Z2 (2-high section) as required. A 1-high housing will only require the Hot Fluid Core.

Spare Parts

 
Part No. Description Details
ACS1038AA11, 12 Housing Z1 Extension Extension piece only
ACS1030AM11, 12 Housing Z1 Extension Kit Extension piece, housing clamp, o-ring
ACS1031AM11, 12 Housing Z2 Extension Kit Extension piece, housing clamp, o-ring
ACS1032AM11, 12 Housing Z3 Extension Kit Extension piece, housing clamp, o-ring
ACS1033AM12 Housing Closure Clamp Kit Housing closure clamp, 1.4301 (AISI 304 SS) and o-ring, EPDM elastomer
ACS1039EM12 Housing O-Ring EPDM elastomer
ACS1050EA DN65 Seal EPDM elastomer, for piping
ACS1081EA DN10 Seal EPDM elastomer, for piping to filtrate vent
ACS1082EA DN6 Seal Kit EPDM elastomer kit, for filtrate vent valve
ACS1053AA Torque Unit (unvented) Torque unit without filtrate vent
ACS1040AA Torque Unit (vented) Torque unit with filtrate vent
ACS1106EX Torque Unit Rod Seal EPDM elastomer
ACS1042AA Torque Wrench Torque unit spare part
ACS1043AA Torque Unit Guide Bush Torque unit spare part
ACS1044AA Torque Unit Clamp Nut Torque unit spare part
KCA69045 Torque Unit Circlip Torque unit spare part
 

11
The PED Category 2 Module H classification limits the maximum allowable housing height to 6-high. Please consult Pall regarding the required system installation for new extension additions, which result in 4 to 6-high housings.
12
Please provide housing serial number when requesting these spare parts.

Application
General F&B, Preclarification, Clarification, Particle Filtration, Fine Filtration, General F&B, Polishing Filtration/Colloid Removal