Marksman™ PFT Series Filter Elements product photo Primary L

Marksman™ PFT Series Filter Elements

High Capacity Pleated
Polypropylene Filter Elements

  • New, larger cartridge geometry
  • High flow capacity
  • Poly-Fine® II proprietary media for highly consistent filtration
  • Inside-out flow traps contaminant inside the element
  • Available to fit most Size 1 and Size 2 bag housings with no hardware changes
  • Available in 101.6 cm (40 in) for use in unique 101.6 cm (40 in) Marksman housings
  • Unique sealing device adjusts to fit in most bag filter housings
  • High surface area for long service life
  • All polypropylene construction
  • Wide chemical compatibility
  • Short length option to accommodate shorter baskets
Products in this datasheet may be covered by one or more patents, including US 7,473,360.


* Required
Need Help?
Download Datasheet
Description

High Capacity Pleated
Polypropylene Filter Elements

  • New, larger cartridge geometry
  • High flow capacity
  • Poly-Fine® II proprietary media for highly consistent filtration
  • Inside-out flow traps contaminant inside the element
  • Available to fit most Size 1 and Size 2 bag housings with no hardware changes
  • Available in 101.6 cm (40 in) for use in unique 101.6 cm (40 in) Marksman housings
  • Unique sealing device adjusts to fit in most bag filter housings
  • High surface area for long service life
  • All polypropylene construction
  • Wide chemical compatibility
  • Short length option to accommodate shorter baskets
Products in this datasheet may be covered by one or more patents, including US 7,473,360.
Specifications

Filter Grades

  • 1, 3, 5, 10, 20, 40, 70, 90, 150 micron (μm)

Maximum Operating Differential Pressure

  • To 5.2 bard @ 20  °C (75 psid @ 68 °F)
  • To 2.4 bard @ 74 °C (35 psid @ 165 °F)
NOTE: Stainless steel flange recommended for temperatures in excess of 43°C (110°F).

Recommended Change-out Differential Pressure1

  • 2.4 bard @ up to 54 °C (35 psid @ up to 130 °F)

Food and Water Contact Use

  • Please contact Pall Corporation to verify that the product conforms to your national legislation and/or regional regulatory requirements for water and food contact use.

Purity

  • Cartridges do not use surfactants, binders, and adhesives.

Sanitization

Materials of Construction

  • Filter media: Polypropylene
  • Hardware: Polypropylene
  • Support material: Polypropylene
  • Gaskets: EPDM, fluorocarbon elastomer, nitrile
  • Sealing: Thermal bond

Dimensions (Nominal)

  • Outside flange diameter: Three diameters are available. contact Pall for information on sizes.
  • Outside filter diameter: 15.2 cm (6 in.)
  • Lengths:
        
    Size 1 - Standard, Short
         Size 2 - Standard, Short, Extra Short
         Size 4 - 101.6 cm (40 in)

Particle Removal Ratings2 (μm)

Cartridge Designation 90% Efficiency >99.9% Efficiency
PFTM 1 1 -
PFTM 3 2 -
PFTM 5 - 5
PFTM 10 - 9
PFTM 20 - 15
PFTM 40 20 -
PFTM 70 - 70
PFTM 90 57 -
PFTM 150 - 145

Typical Flow

  mbard/lpm (psid/gpm) Water @ 20°C (68°F)
Filter Grade Size 1 Size 2 40 in Size 1 (short) Size 2 (short)
1 0.838
(0.046)
0.364
(0.020)
0.273
(0.015)
0.765
(0.042)
0.328
(0.018)
3 0.346
(0.019)
0.164
(0.008)
0.109
(0.006)
0.310
(0.017)
0.128
(0.007)
5 0.109
(0.006)
0.054
(0.003)
0.018
(0.001)
0.109
(0.006)
0.054
(0.003)
10 0.054
(0.003)
0.018
(0.001)
0.018
(0.001)
0.054
(0.003)
0.018
(0.001)
20 0.036
(0.002)
0.018
(0.001)
0.018
(0.001)
0.036
(0.002)
0.018
(0.001)
40 0.018
(0.001)
0.018
(0.001)
0.018
(0.001)
0.036
(0.002)
0.018
(0.001)
70 0.018
(0.001)
0.018
(0.001)
0.018
(0.001)
0.018
(0.001)
0.018
(0.001)
90 0.018
(0.001)
0.018
(0.001)
0.018
(0.001)
0.018
(0.001)
0.018
(0.001)
150 0.018
(0.001)
0.018
(0.001)
0.018
(0.001)
0.018
(0.001)
0.018
(0.001)
NOTE: For kPa, multiply mbard/lpm by 0.1.
1Provided that the maximum differential pressure is not exceeded based on temperature limits defined above.
2Marksman PFT series filter cartridge retention ratings are based on Pall’s Dynamic Efficiency test protocol. This single pass, destructive challenge test is based on ASTM F-795 test procedures for determining the performance of a filter medium. Fine test dust is used as the test contaminant for filters in the 1 to 20 micron range. Coarse test dust is used for micron ratings above 20 micron. Additional information can be obtained by contacting Pall Corporation. NOTE: PFTM grade designations for 1, 3, 40, and 90 based on Beta 10 values, and all other grade designations are based on Beta 1000 values.
Type
Cartridges and Elements
Use
Filtration, Prefiltration, Polishing
Ordering Information
This information is a guide to the part number structure and possible options. For availability of specific options and housing details, please contact Pall.

Example Part Number: PFTM S 3 - 1 U V - PF B ( See bold references in tables below)

Part Number: PFTM < Length Code from Table 1 > < Length Code from Table 2 > - < Cartridge Code from Table 3 > U < Gasket Code from Table 4 > - < Configuration Code from Table 5 > < Flange/Gasket Code from Table 6 >

Table 1 - Short Length Option

Code Short Length Option
Blank Standard
S Short
XS Extra short 3, 4

Table 2 - Filter Grades (µm)

Code Filter Grades (μm)
1 1
3 3
5 5
10 10
20 20
40 40
70 70
90 90
150 150

Table 3 - Cartridge Lengths Nominal

Code Cartridge Lengths Nominal
1 Size 1 bag
2 Size 2 bag
4 101.6 cm  

Table 4 - Gasket Materials

Code Gasket Materials
Blank For NF version
N Nitrile
E EPDM (peroxide cured)
V Fluorocarbon elastomer

Table 5 - End Configuration

Code End Configurations
PF Plastic self-adjusting flange
SF Stainless steel self-adjusting flange (required for temperatures >43°C/110°F)
NF No flange (for use with reusable SS flange)

Table 6 - Flange/Gasket styles5

Code Flange/Gasket Styles5
A6 Rosedale7, Strainrite, Krystil Klear8, Pall
B GAF9, FSI10 side entry
C FSI over the top, Hayward11 over the top

3Size 2 (only)
4Select “XS” for Extra Short, “2” for Size 2 bag, and add “68” to the end of the part number (e.g., PFTMXS1-2UN-PFC 68).
5For housings not listed or other than original equipment baskets, consult your Pall sales representative for proper flange/gasket style.
6Requires “A” flange if using any of the Marksman 101.6 cm (40 in) products in the 101.6 cm (40 in) Pall Marksman housing.
7Rosedale is a registered trademark of Rosedale Products, Inc.
8Krystil Klear is a registered trademark of Pentair Water Filtration.
9GAF is a registered trademark of GAF Corporation.
10FSI is a registered trademark of Filter Specialists, Inc.
11Hayward is a registered trademark of Hayward Industrial Products, Inc.
Application
Incoming Water, Preclarification, Incoming Water
Segment
Beer (Corporate)
Beer (Craft/Micro Breweries)