TKO 500 Series Filter Housings product photo Primary L

TKO 500 Series Filter Housings

Five-Around, Multi-Cartridge Housings

  • 150 PSIG (10.3 BAR) maximum operating pressure permits use in a wide range of applications
  • Accepts Pall M3 (Code 3), M8 (Code 8) or DOE style filter cartridges
  • Accepts five 10 in. (25.4 cm), 20 in. (50.8  cm), 30 in. (76.2 cm) or 40 in. (102 cm) cartridges for an optimum choice at a given flow rate
  • Heavy duty V-clamp closure allows quick, easy cartridge change out
  • 304 or 316L Stainless Steel materials of construction for maximum corrosion resistance in a non-code housing


* Required
Need Help?
Download Datasheet
Description

Five-Around, Multi-Cartridge Housings

  • 150 PSIG (10.3 BAR) maximum operating pressure permits use in a wide range of applications
  • Accepts Pall M3 (Code 3), M8 (Code 8) or DOE style filter cartridges
  • Accepts five 10 in. (25.4 cm), 20 in. (50.8  cm), 30 in. (76.2 cm) or 40 in. (102 cm) cartridges for an optimum choice at a given flow rate
  • Heavy duty V-clamp closure allows quick, easy cartridge change out
  • 304 or 316L Stainless Steel materials of construction for maximum corrosion resistance in a non-code housing
Specifications

Materials of Construction

Construction A SL
Head 304 Stainless Steel  316L Stainless Steel
Shell 304 Stainless Steel  316L Stainless Steel
Vent Plug 304 Stainless Steel  316 Stainless Steel
Drain Cap 304 Stainless Steel  316 Stainless Steel
Bottom Seat Plate 316L Stainless Steel 316L Stainless Steel

Maximum Operating Pressure1 (Liquid Service)

  • 150 psig (10.3 bar) @ 200 °F (93 °C)
Note: Maximum operating pressure ratings are vessel ratings only. Safe operating temperature and pressure will depend on filter cartridge and gasket/O-ring used. For inquiries on compatibility, contact the factory or your Pall distributor.

Connections

  • lnlet/Outlet: 1 1/2", 2" NPT
  • Vent: 3/4" NPT 
  • Drain: 1/4" NPT

Shell O-rings

  • Ethylene Propylene (standard), Buna N, Viton2 A, Silicone Elastomer

Connection Option

  • Available with 150 lb. ANSI raised face flanges.

Internal Components

  • 316 stainless steel top seat plate assemblies and tube guides
    are standard with internal parts option.

Dimensional Data (Nominal)

Dimensions (inches)



Model Flow Rates




Liquid3(gpm)





A





B





C





D





E



Maximum Cartridge Diameter




Weight (pounds)
Overhead4 Clearance Required for Cartridge Removal
5TKO1-1.5 To 25 (94.6 lpm) 20 3/4 (52.7 cm) 6 3/4 (17.1 cm) 2 7/8(7.3 cm) 12 (30.5 cm) 12 7/8(32.7 cm) 2 3/4 (7 cm) 37 (17 kg) 31 (78.7 cm)
10TKO2-1.5 To 50 (189.3 lpm) 29 1/4
(74.3 cm)
6 3/4
(17.1 cm)
2 7/8(7.3 cm) 12 (30.5 cm) 12 7/8 (32.7 cm) 2 3/4 (7 cm) 42 (19 kg) 48 1/2 (123.2 cm)
15TKO3-2 To 75 (284 lpm) 39 3/4
(101 cm)
6 3/4
(17.1 cm)
2 7/8(7.3 cm) 12 (30.5 cm) 12 7/8 (32.7 cm) 2 3/4 (7 cm) 48 (22 kg) 72 (183 cm)
20TKO4 -2 To 100 (379 lpm) 50 1/4
(127.6 cm)
6 3/4
(17.1 cm)
2 7/8(7.3 cm) 12 (30.5 cm) 12 7/8(32.7 cm) 2 3/4 (7 cm) 54 (25 kg) 89 1/2 (227.3 cm)



Note: Side view shows sealing arrangement for DOE style cartridges on left (TKO-IP) model and M3 (Code 3) or M8 (Code 8) style cartridges (M8 shown) on right (TKO model).

Housing Differential Pressure vs. Liquid Flow Rate


TKO 500 Series Filter Housing Differential Pressure vs. Liquid Flow Rate
<
For liquids other than water, multiply differential pressure by specific gravity.

1Not for use with compressed gases.
2Registered trademark of DuPont Dow.
3Flow rates are listed for depth cartridges. Consult factory for more specific information.  
410-inch cartridges may be used instead of 20 in., 30 in., or 40 in. cartridges in 2, 3, or 4-deck TKO-IP housings, which will reduce this height. When using 10-inch cartridges in multi-deck housings, cartridge spacers are required. For 316 stainless steel spacers, specify Part #T10583032.
5Add 3/4" to dimensions for flanged version.
Type
Filter Housings
Use
Filtration
Ordering Information
This information is a guide to the part number structure and possible options. For availability of specific options and housing details, please contact Pall.

Example Part Number: 5 TKO 2 A - 2 F - IP (See bold references in tables below)

Part Number: < Equivalnet Code from Table 1 > TKO  < Equivalnet Code from Table 2 >< Materials Code from Table 3 > - < Inlet/Outlet Code from Table 4 > < Connection Code from Table 5 > - < Parts Code from Table 6 >

Table 1 - 10 in. Equivalents

Code No. of 10 in. Equivalents
5 5
10 10
15 15
20 20

Table 2 - 10 in. Equivalents per Column

Code No. of 10 in. Equivalents per Column
1 1
2 2
3 3
4 4

Table 3 - Materials of Construction

Code Materials of Construction
A 304 Stainless Steel
SL 316 Stainless Steel

Table 4 - Inlet/Outlet Connection Sizes

Code Inlet/Outlet Connection Sizes
1.5 1.5" (standard) on 5 & 10 TKO
2 2" (standard) on 15 & 20 TKO

Table 5 - Connection Styles

Code Connection Styles
Blank NPT
F Flange

Table 6 - Internal Parts

Code Internal Parts6
Blank No Internal Parts
IP Internal Parts

6Standard vessels include internal parts of top seat plates and tube guides. Basic vessels without internal parts may be ordered as non-stock items.
Application
General F&B, Incoming Water, Incoming Water, General F&B
Segment
Beer (Corporate)
Beer (Craft/Micro Breweries)