Profile® UP Filter Cartridges
Pleated Depth Filters Designed for The filter cartridge combines the advantages of a continuously graded pore structure and unique laid-over pleat geometry to provide an increase in effective filtration area and service life. Fewer cartridges are required for a given flow rate than for a traditional depth style cartridge. Thus, filter vessels are correspondingly smaller, resulting in lower capital and installation costs, as well as reduced operating costs.
High Particle Removal Efficiency
|Fixed fiber matrix with no adhesives or surfactants|| |
|Media with laid-over pleat geometry|| |
|Polypropylene filter construction||Broad chemical compatibility|
- Food contact compliant filters are available. Please consult the Declarations of Compliance for applicable part numbers at the links below.
- Profile UP Filter Cartridge (AB Style “W” Code) Declaration of Compliance
- Profile UP Filter Cartridge (PUY Style “W” Code) Declaration of Compliance Materials of Construction
- Cartridges produced in a controlled environment
- Manufactured according to ISO 9001:2008 certifiedQuality Management System
Food Contact Compliance
|Filter Medium||Pleated polypropylene|
|Support and Drainage||Polypropylene|
|Helical Wrap||Polypropylene non woven fabric|
|Cage, Core, Fin End and End Cap||Polypropylene|
|AB Style Cartridges Only|
|Adaptor||Polypropylene with a stainless steel reinforcing ring|
|O-ring Seal||Ethylene Propylene Rubber or Silicone Elastomer|
|PUY Style Cartridges Only|
|Gasket||Ethylene Propylene Rubber|
Operating Characteristics in Compatible Fluids1
|Maximum Differential Pressure||Operating Temperature|
|4.1 bard (60 psid) (forward)||<30 °C (86 °F)|
|3.4 bard (50 psid) (forward)||<50 °C (122 °F)|
|2 bard (29 psid) (forward)||<70 °C (158 °F)|
|1 bard (14.5 psid) (forward)||<80 °C (176 °F)|
|1 bard (14.5 psid) (reverse)||<20 °C (68 °F)|
1 Fluids which do not swell, soften, or adversely affect any of the filter components
Typical Flow Rates2
2Typical initial clean delta p per 254 mm (10 inch) cartridge, water at 20 °C (68 °F).
For liquids with viscosity greater than 1 cP, multiply the delta p by the viscosity.
Liquid Removal Rating
|Grade||Rating (μm) at 99.98% Efficiency (ß-5000)||Rating (μm) at 90% Efficiency (ß-10)|
Profile UP filter cartridge liquid retention ratings are based on modified OSU-F2 test.
Sterilization and Sanitization3
|In-situ Steam Sterilization||125 °C (257 °F)|
|In-situ Hot Water Sanitization||80 °C (176 °F)|
3For applications requiring in situ sterilization or sanitization Pall recommends the use of Code 7 adaptors to ensure filter sealing after cooling. Cartridges should be cooled to system operating temperature prior to use.
Example Part Numbers:AB2UY0457WH4
(See bold references in tables below.)
Table 1 - Nominal Length
|1||254 mm (10 in.)|
|2||508 mm (20 in.)|
|3||762 mm (30 in.)|
|4||1016 mm (40 in.)|
Table 2 - Removal Rating4
|Grade||Rating (μm) at 99.98% Efficiency (ß-5000)5||Rating (μm) at 90% Efficiency (ß-10)|
4 Profile UP filter cartridge liquid retention ratings are based on a modified OSU-F2
single pass test.
5 The UY020 grade has a 99% removal efficiency (ß-100).
Table 3 - Adaptor
|3||SOE - single open end with flat closed end and external 222 O-rings|
|7||SOE - single open end with fin end; 2 locking tabs and external 226 O-rings|
|8||SOE - single open end with fin end and external 222 O-rings|
(Code 3, 7 and 8 may be available in selected grades, confirm code availability with your Pall representative.)
Table 4 - O-ring Seal Material
|J||Ethylene Propylene Rubber|
Beer (Craft/Micro Breweries)