PREcart PP II filter cartridges are extremely robust and high performance pleated depth filters designed for particle removal in food and beverage applications.
The PREcart PP II filter element is designed to meet the high mechanical resistance and compatibility requirements of typical food and beverage production cycles of filtration, sanitization, regeneration and steam sterilization.
It is frequently used in a wide variety of applications requiring excellent particle removal. Satisfying filtrate quality specifications or effectively prolonging the life of downstream final filters, Precart PP II is a proven and versatile solution for the food and beverage industry.
|Pleated polypropylene filter media with graded density structure and fixed fiber matrix|| |
|Superior backflush capability for cartridge regeneration|| |
|Extremely robust cartridges, resistant to multiple in situ steam sterilization and hot water sanitization cycles|| |
|Individually serialized cartridges and record controls|| |
- Cartridges produced in a controlled environment
- Manufactured within a Quality Manufacturing System certified to ISO 9001:2008
Food Contact Compliance
Please refer to the Pall website Compliance to specific National Legislation and/or Regional
Regulatory requirements for food contact use.
Materials of Construction
|Cage, Core, Fin End and End Cap||Polypropylene|
|SOE Style Cartridges only |
|Polypropylene with internal stainless steel reinforcing ring|
|O-ring Seal||Silicone Elastomer |
Ethylene Propylene Rubber
|DOE Style Cartridges only Gaskets||Silicone Elastomer |
Ethylene Propylene Rubber
The technical information provided is based on controlled laboratory tests done on typical production filters at the conditions described, unless otherwise indicated. Actual operating conditions may affect the filter's performance.
Operating Characteristics in Compatible Fluids1
|Maximum Differential Pressure||Operating Temperature|
|5.0 bard (72.5 psid) (forward)||25 °C (77 °F)|
|2.0 bard (29 psid) (forward)||80 °C (176 °F)|
|1.5 bard (21.8 psid) (forward)||90 °C (194 °F)|
|1 bard (14.5 psid) (reverse)||60 °C (140 °F)|
1Fluids which do not swell, soften or adversely affect any of the filter components
Typical Flow Rates2
Typical initial clean delta p per 254 mm (10 inch) cartridge, water at 20 °C (68 °F). For liquids with viscosity greater than 1 cP, multiply the delta p by the viscosity
Sterilization and Sanitization3
|Method||Maximum Temperature||Maximum Number of Cycles4|
|Steam Sterilization (forward)||134 °C (273 °F)||25 x 30 minutes|
|Hot Water Sanitization (forward)||90 °C (194 °F)||50 x 30 minutes4|
For applications requiring in situ sterilization or sanitization Pall recommends the use of Code 7 adaptors to ensure filter sealing after cooling. Cartridges should be cooled to system operating temperature prior to use.
Extensive field experience indicates these filters show excellent resistance to hot water sanitization, typically 50 30-minute cycles at temperatures of 80-90 ºC (176-194 ºF).
Extensive field experience indicates that these filters withstand over 50 20-minute hot water backflushing cycles at up to 60 °C (140 °F) and maximum 1 bar (14.5 psid). The cleaning effectiveness is a function of several parameters. The use of DOE filters is not recommended.
This information is a guide to the part numbering structure and possible options. For availability of specific options and housing details, please contact Pall.Part Number: 499A [Table 1] W [Table 2] [Table 3] [Table 4] P
Example Part Number: 499A130W073SP
See bold reference codes in tables.
Table 1: Removal Rating5
|5||PREcart PP filter cartridge liquid retention ratings are based on a modified OSU-F2 single pass test. The removal efficiency for all grades is 99.98%.|
Table 2: Adaptor
|03||SOE – single open end with flat closed end and external 222 O-rings|
|07||SOE – single open end with fin end, 2 locking tabs and external 226 o-rings|
|08||SOE – single open end with fin end and external 222 O-rings|
|22||DOE – double open end with end caps and gaskets|
|221||DOE – double open end with end caps and gaskets|
|41||SOE – single open end with fin end, 3 locking tabs and external 222 O-rings|
Table 3: Nominal Length
|SOE||DOE (22)||DOE (221)|
|1||254 mm (10")||252 mm (9.9")||use Code 22|
|2||508 mm (20")||498 mm (19.6")||506 mm (19.9")|
|3||762 mm (30")||746 mm (29.4")||762 mm (30")|
|4||1016 mm (40")||994 mm (39.1")||1018 mm (40.1")|
Table 4: O-ring /Gasket Seal Material
|E||Ethylene Propylene Rubber|