SUPRApak™ Plus PR Series Modules

For High Throughput Depth Filtration in Enclosed Systems

SUPRApak Plus PR depth filter module design is using the new layer to layer seal technology.

 

 

Order Products

SUPRApak PR 5100 LW

Product ID: 5303394
Unit of Measure
1/EA
Min Order Qty
1
Core Drainage Discs
Polypropylene
Diameter (Imperial)
16 in
Diameter (Metric)
410 mm
Filter Media
Kieselguhr, Perlite and Cellulose Fibers
Filtration Area (Imperial)
86.1 ft²
Filtration Area (Metric)
8 m²
See All Attributes

Description

Developed from traditional depth filtration technology, SUPRApak modules efficiently combine the filtration mechanisms of surface filtration, depth filtration and adsorption. Highly unique to their design is an entirely new flow configuration, based on the “edgeflow” principle

 

Seitz® filter sheet material is wrapped around a central, permeable core. Feed and filtrate channels provide a fluid flow path resulting in maximum utilization of the sheet material, to provide highly efficient contaminant removal and a cost-effective enclosed system alternative to flat sheet filtration. New to the SUPRApak PR Series is an improved layer to layer sealing which offers the following features and benefits:

 

Features Benefits
Flow configuration based on “edge flow” principle
  • Up to 6 times higher throughput compared to classical sheet filtration, resulting in longer process uptimes1
  • Increased adsorption capability and excellent filtrate quality

Sealing line technology

  • Higher mechanical stability
  • Modules can be steam sanitized
  • Higher dp stability and therefore higher total throughput

Enclosed filtration system

  • Increased process safety and product quality
  • No drip losses
  • Minimal operator exposure to process fluids
Drainable, low hold-up volume assembly
  • Higher product yield; lower cleaning costs
High filtration capacity in compact design
  • Small footprint
Simple, quick installation and servicing
  • Reduced labor and maintenance costs

 

1 Depending on application and product selection

Specifications

Quality

  • Filter sheets produced in a controlled environment
  • Manufactured according to ISO 9001:2015 certified Quality Management System

 

Food Contact Compliance

Please refer to the Pall website www.pall.com/foodandbev for a Declaration of Compliance to specific National Legislation and/or Regional Regulatory requirements for food contact use.

 

Main Components2

Component Description
Sheet material PR 5100 Cellulose Polyolefine fibers, Natural Diatomaceous Earth (DE, Kieselguhr) Perlites
Center core Polypropylene (20% talc-filled)
Sealing line Polypropylene
2 For more information on materials of construction, please see the Declaration of Compliance at www.pall.com/foodandbev.

 

Technical Information

 

Operating Characteristics in Compatible Fluids3

Module Size Grade Max. Operating Temperature
SUPRApak S,M,L PR 5100 80 °C (167 °F) / 8 hours4

3 Compatible fluids are those which do not adversely affect the filter materials of construction 

4 Laboratory tests up to 8 hours exposure. Actual field experience shows substantially longer resistance to high temperatures. For continuous hot fluid applications over 40° C (104° F), a stainless steel support core is required. Please see SUPRApak housing data sheet for information. 

 

Operating Guidelines

 

Field experience shows that maximum achievable differential pressures vary with the applications and product selection. They are determined by monitoring filtrate quality, and are influenced by several factors. Please contact Pall for details, and refer to SUPRApak module instructions for use.

 

Nominal Weight and Typical Ash Content

Module Dry Weight Wet Weight Ash Content5
SUPRApak PR 5100 L

11-12 kg

(24.2-26.4 lbs)

25-30 kg

(55-66 lbs)

40-54%
SUPRApak PR 5100 M

5.1-5.6 kg

(11.2-12.3 lbs)

15.5-16.5 kg

(34.1-36.3 lbs)

40-54%
SUPRApak PR 5100 S

1.6-1.8 kg

(3.5-4 lbs)

3.5-4.5 kg

(7.7-9.9 lbs)

40-54%

5 These figures are determined on typical finished articles. Values differ for individual PR grades. Ash values for the filter sheets in individual batches are available on request.

 

Sanitization6

Method Temperature Time/Cycles6
Hot Water 85 °C (185 °F) 20 cycles @ 20 min each
Steam 125 °C (258 °F) 10 cycles @ 20 min each

6 The actual time required may vary as a function of the process conditions. Laboratory tests were carried out up to the stated cycle quantity. Actual field experience shows more cycles are achievable, coupled with proper filtrate quality monitoring.

 

Rinsing7

Module Size

Rising

Volume/Module

Recommended

Flow Rate

SUPRApak L 340 liters (90 US gal) 1.5 times filtration flow rate
SUPRApak M 140 liters (37 US gal)  1.5 times filtration flow rate
SUPRApak S 20 liters (5.3 US gal)  1.5 times filtration flow rate

7 Depending on the application, rinsing with cold or warm water in a forward flow direction is recommended prior to filtration.

Documents

Datasheet

  • SUPRApak™ Plus PR Series Modules

    Select Language :

Related Documents

  • Increase Filtration Capacity and Reduce Process Time in Citrus Oil De-waxing Applications

    Select Language :

Videos

Pall SUPRApak vs Filter Press setup time

Ordering Information

This information is a guide to the part number structure and possible options. For availability of specific options and housing details, please contact Pall.

 

Part number nomenclature:

 

SUPRApak PR [Table 1] [Table 2] W

 

Example Part Number: SUPRApak PR 5100 LW

 

See bold reference code in tables.

 

Table 1: Grade

Code

5100
 
 
Table 2: Nominal Dimensions
Code Height External Diameter
L 250 mm (9.8”)  415 mm (16.3”)
M 250 mm (9.8”) 285 mm (11.2”)
S 250 mm (9.8”) 183 mm (7.5")