Pall-Fit™ Elements for Schroeder Filter Housings product photo Primary L

Pall-Fit™ Elements for Schroeder Filter Housings

Upgrade Schroeder A, C, CC, J, K Filter Elements to Pall Ultipor® III Filter Media
Pall-Fit elements allow you to use Pall Ultipor filters in your existing filter housings. Ultipor filters optimize efficiency and service life, while maintaining low differential pressure and high strength. This allows you to economically achieve superior system cleanliness for maximum protection.


* Required
Need Help?
Description
Upgrade Schroeder A, C, CC, J, K Filter Elements to Pall Ultipor® III Filter Media
Pall-Fit elements allow you to use Pall Ultipor filters in your existing filter housings. Ultipor filters optimize efficiency and service life, while maintaining low differential pressure and high strength. This allows you to economically achieve superior system cleanliness for maximum protection.
Specifications

Filter Medium:

Inert inorganic fibers, in a tapered pore structure impregnated and bonded with epoxy resin.

Filter Construction:

Ultipor III–Upstream and downstream nylon support mesh. Each pleat firmly bonded to helical wrap for superior stability.

Filter Element Hardware:

Corrosion protected steel end caps and core.

Fluid Compatibility:

(per ISO 2943)
Compatible with petroleum oils, water-glycols, water-oil emulsions, and HWCF.
Use fluorocarbon seals for industrial phosphate esters, diesters, and specified synthetics.

Temperature range:

Nitrile seals -45°F to 225°F.
Fluorocarbon seals -20°F to 250°F.
140°F max in water based fluids.

Collapse Pressure Rating:

(per ISO 2941)
290 psid

Multipass Filtration Ratings:

(per ISO 16889)
Performance

Technical Information


Pall Media Grade µm Rating for ß Value
ß=200
µm(c) Rating for ß Value
    ß=2 ß=10 ß=75 ß=100 ß=200 ß=1,000
Ultipor III
KP 3 <2 <2 3.1 3.3 3.8 5
KS 12 3.2 5.5 8.3 8.7 9.7 12
Type
Cartridges and Elements
Use
Filtration, Polishing, Prefiltration, Removal
Ordering Information
Schroeder Element   Dimensions (ref.) DP Factors
(psid/gpm -150 SUS)
Part No. Qty./HSG Pall Part No. OD Length ID KP KS
A** Single HC9730F**5H 3.0 4.82 1.05 0.41 0.27
A** Double HC9730F**10H 3.0 9.77 1.05 0.19 0.13
C** Single HC9725F**5H 2.8 4.64 1.05 0.49 0.31
CC** Single HC9725F**10H 2.8 9.50 1.05 0.22 0.14
8T** Single HC9600F**8H 3.1 8.20 1.70 0.16 0.09
J** Single HC9735F**9H 3.5 9.20 1.60 0.14 0.08
J** Double HC9735F**18H 3.5 18.46 1.60 0.07 0.04
J** Triple HC9735F**27H 3.5 27.73 1.60 0.05 0.03
K** Single HC9700F**9H 3.9 9.20 1.60 0.11 0.06
K** Double HC9700F**18H 3.9 18.46 1.60 0.05 0.03
K** Triple HC9700F**27H 3.9 27.73 1.60 0.04 0.02
Schroeder
(**) Media Grade
S1
-3
S3
-10
S7
S10
-25
Recommended Pall (**) Media Grade
KP


KS
Original housings often use a stack of two or three A, J, or K elements. Replacing these with a single Pall filter element is recommended. Pall filter elements can also be stacked using existing connectors, or for the 9735 and 9700 series, Pall connector p/n HBS630-1D5 can be used.
Schroeder designates Fluorocarbon seals with a ‘V’ (Viton). Change the ending ‘H’ in Pall p/n to ‘Z’ for this option.


Pall-Fit Element Selection from Schroeder Housing Part Number
Schroeder Housing p/n logic uses the following sequence:



Examples
Element type, media, length, and seals are found in this section of the part no.
Filter Series

Number of Elements

Element Type/Media Seal Material Porting Options Indicator Recommended Pall Element Part No.
JF20 2 J3 Omit P D HC9735FKP18H
KF30 3 KS3 V S D HC9700FKP27Z

Application
Midstream Process Water, Midstream Process Water, Mining Equipment Gear Case, Mining Equipment Gear Case, Mining Equipment Hydraulic Fluid, Mining Equipment Hydraulic Fluid, Mining Euqipment Lube Oil - on & off board, Mining Euqipment Lube Oil - on & off board, Mining Final Product (Post Smelt/Burn off Impurities), Mining Final Product (Post Smelt/Burn off Impurities), Mining Final Product (Slurry), Mining Final Product (Slurry), Mining Wastewater, Mining Wastewater, Municiple Mining Water [Rinsing] , Municiple Mining Water [Rinsing] , Heavy Fuel, Heavy Hydraulic, Heavy Lubrication, Medium & Light Fuel, Medium & Light Hydraulic, Medium & Light Lubrication, Auto LOH for Stamping, Heavy Lubrication, Material Handling, Auto Painting/Coating Zinc Phosphate Bath, Midstream Process Water, Midstream Process Water, Midstream Process Water, Midstream Process Water, Midstream Process Water, Mining Equipment Gear Case, Mining Equipment Hydraulic Fluid, Mining Euqipment Lube Oil - on & off board, Mining Final Product (Post Smelt/Burn off Impurities), Mining Final Product (Slurry), Mining Wastewater, Municiple Mining Water [Rinsing] , Heavy Fuel, Heavy Hydraulic, Heavy Lubrication, Medium & Light Fuel, Medium & Light Hydraulic, Medium & Light Lubrication, Coolants / Bearing Lubrication, Drives Gear Box + Roll Housing, Forging / Extrusion, Gear Box / Bearing, Gear Box / Morgoil, Material Directional Control, Material Handling, Non Contact, Quenching / Cleaning, Roll Bite (Safety Filter), Shape + Material Handling, Pulp&Paper Bleach Chemical Prep, Pulp&Paper LOH, Pulp&Paper Machine Process Application, Pulp&Paper Paper Coating, Pulp&Paper Pulp Screening, Auto Painting/Coating Zinc Phosphate Bath, Medium & Light Hydraulic, Medium & Light Lubrication, Midstream Process Water