9901 Series Non-Bypass High Pressure Filters product photo Primary L

9901 Series Non-Bypass High Pressure Filters

Coralon® lube and hydraulic oil filters deliver consistent, high-level fluid system protection across all applications, regardless of severity. Coralon filters feature BetaX(C) >1000 filter efficiency, low-pressure drop, and long service life.

Features

  • Flows to 910 L/min (250 US gpm)
  • Pressures to 414 bard (6000 psid)
  • Port size 2"


* Required
Need Help?
Download Datasheet
Description

Coralon® lube and hydraulic oil filters deliver consistent, high-level fluid system protection across all applications, regardless of severity. Coralon filters feature BetaX(C) >1000 filter efficiency, low-pressure drop, and long service life.

Features

  • Flows to 910 L/min (250 US gpm)
  • Pressures to 414 bard (6000 psid)
  • Port size 2"
Specifications

Notes and Specifications

Filter Housing

  • Fatigue Pressure Rating
    207 bar (3000 psi) per NFPA T2.6.1 R2-2001 Cat C/90
    (1 million cycles)
  • Typical Burst Pressure:
    1,035 bar (15,000 psi)
  • Filter Element Collapse Pressure:
    207 bar (3000 psid)
  • Fluid Compatibility:
    Compatible with all petroleum oils and most water glycols, water-oil
    emulsions, and synthetic hydraulic and lubricating fluids
  • Temperature Range:
    -29 ˚C to 120 ˚C (-20 ˚F to 250 ˚F)
    60 ˚C (140 ˚F) maximum in HWCF or water glycols
  • Bypass Valve Setting:
    Non-bypass
  • Indicator Pressure Setting:
    7 bar (100 psid)
  • Housing Materials of Construction:
    Ductile iron head and cover; steel tube


Performance

Pressure Drop Information

Housing pressure drop using fluid with 0.9 S.G. Housing pressure drop is directly proportional to specific gravity.

Element Pressure Drop

Multiply actual flow rate times factor in table below to determine pressure drop with fluid at 32 cSt (150 SUS), 0.9 S.G. Correct for other fluids by multiplying new viscosity in cSt/32 (SUS/150) x new S.G./0.9.

9901 Series Element DP Factors (psid/US gpm)

 
Length
Code
CP CS CT
26” 0.10 0.035 0.03
39” 0.06 0.025 0.02
 
Type
Assemblies, Filter Housings
Use
Filtration, Polishing, Prefiltration, Removal
Ordering Information

For new installations, select one complete part number from each section below

Section 1 Housing P/N:

Note: Pall filter housings are supplied without filter elements or filter change out warning devices. Never operate the filter housing unless a filter element is fitted and all warning device ports are sealed.

Housing part number designates indicator port is fitted with a plastic shipping plug.

 
Part Number
HZ9901E32XW1
HZ9901E32VW1
HZ9901G32XW1
HZ9901G32VW1
 

 
Part Number (Description) Breakdown
HZ = housing with fluorocarbon seals
9901 = 9901 series housing
E32 = 2” Flange ports SAE J518C code 61 (207 bar/3000 psi max pressure)
G32 = 2” ISO 6162 split flange ports (400 bar/5800 psi max pressure)
V = 26” nominal length
X = 39” nominal length
W = non-bypass
1 = 1 indicator warning device port
 

Section 2 Element P/N: HC9901F [Table 1] 39 [Table 2]

Table 1: Filter Performance Ratings

 
Code ßx(c) ≥1000 based
on ISO 16889
CP 5
CS 12
CT 15
 

Table 2: Seal Options

 
Code Description
Z Fluorocarbon
H Nitrile
 

Section 3 Differential Pressure Indicator P/N: RC [Table 3] Z 090 Z [Table 4]

Note: If no Differential Pressure Indicator is selected, ‘B’ type blanking plug (P/N HC9000A104Z) must be ordered seperately and fitted to replace the shipping plug.

Note: Z indicates fluorocarbon seals are standard. Other options are available; contact Pall.

Table 3: Indicator Options

 
Code Brass Option Indicator
A218M Electrical switch (SPDT) with Hirschmann connector
A218R Electrical switch (SPDT) with Hirschmann connector
with Red and Green LED indicators
A219D Visual indicator
 
 
Code Stainless Steel Option Indicator
778N Visual filter with thermal lockout
861C Electrical switch (SPDT) with Hirschmann
connector
771B Electrical switch (SPDT) with 3-pin
 

Table 4: Differential Pressure Indicator Material

 
Code Description
Omit If Brass Indicator is selected in Table 3
SS If Stainless Steel Indicator is selected in Table 3 (recommended for high pressure applications with pressure > 200 bar (3000 psi)
 
Application
Auto LOH for Stamping, Heavy Lubrication, Material Handling, Auto Painting/Coating Zinc Phosphate Bath, Midstream Process Water, Midstream Process Water, Midstream Process Water, Midstream Process Water, Midstream Process Water, Mining Equipment Gear Case, Mining Equipment Hydraulic Fluid, Mining Euqipment Lube Oil - on & off board, Mining Final Product (Post Smelt/Burn off Impurities), Mining Final Product (Slurry), Mining Wastewater, Municiple Mining Water [Rinsing] , Heavy Fuel, Heavy Fuel, Heavy Hydraulic, Heavy Hydraulic, Heavy Lubrication, Heavy Lubrication, Medium & Light Fuel, Medium & Light Fuel, Medium & Light Hydraulic, Medium & Light Hydraulic, Medium & Light Lubrication, Medium & Light Lubrication, Auto LOH for Stamping, Heavy Lubrication, Material Handling, Auto Painting/Coating Zinc Phosphate Bath, Midstream Process Water, Midstream Process Water, Midstream Process Water, Midstream Process Water, Midstream Process Water, Mining Equipment Gear Case, Mining Equipment Hydraulic Fluid, Mining Euqipment Lube Oil - on & off board, Mining Final Product (Post Smelt/Burn off Impurities), Mining Final Product (Slurry), Mining Wastewater, Municiple Mining Water [Rinsing] , Heavy Fuel, Heavy Hydraulic, Heavy Lubrication, Medium & Light Fuel, Medium & Light Hydraulic, Medium & Light Lubrication, Coolants / Bearing Lubrication, Drives Gear Box + Roll Housing, Forging / Extrusion, Gear Box / Bearing, Gear Box / Morgoil, Material Directional Control, Material Handling, Non Contact, Quenching / Cleaning, Roll Bite (Safety Filter), Shape + Material Handling, Pulp&Paper Bleach Chemical Prep, Pulp&Paper LOH, Pulp&Paper Machine Process Application, Pulp&Paper Paper Coating, Pulp&Paper Pulp Screening, Auto Painting/Coating Zinc Phosphate Bath, Medium & Light Hydraulic, Medium & Light Lubrication, Midstream Process Water