Filter Housing

• Maximum Working Pressure: 240 bar (3480 psi)
• Rated Fatigue Pressure: 0-240 bar (0-3480 psi) per NFPA T2.06.01R2-2001 CAT C/90/*(1 million cycles), verified by testing at 0-280 bar (0-4060 psi) for 1 million cycles. Contact Pall for applications with higher pressures at lower cycles
• Fluid Compatibility: Compatible with all petroleum oils, water glycols, water-oil emulsions and most synthetic hydraulic and lubrication fluids
• Temperature Range:
  • Nitrile Seals: -43 ®C to 120 ®C (-46 ®F to 250 ®F) 60 ®C (140 ®F) maximum in HWCF or water glycol fluids
  • Fluorocarbon Seals: -29 ®C to 120 ®C (-20 ®F to 250 ®F)
• Bypass Valve Settings: 4.5 bard (65 psid)
• Indicator Pressure Settings: 3.4 bard (50 psid)
• Materials of Construction:
  • Head: Ductile Cast Iron
  • Tube: Carbon steel

Filter Element

• Filter Element Burst Pressure: 10 bard (145 psid)
• Filter Element Construction: Inorganic fibers impregnated and bonded with epoxy resins. Polymer endcaps. Corrosion protected carbon steel.

Pressure Drop Information

Housing pressure drop using fluid with 0.9 S.G.
Housing pressure drop is directly proportional to specific gravity.

HCG200 Filter Elements ® bard/1000 L/min (psid/US gpm)

Length Code	KN	KS	KD	KT
04	11.67 (0.64)	8.34 (0.46)	7.02 (0.38)	5.42 (0.30)
08	5.68 (0.31)	4.11 (0.23)	3.58 (0.19)	2.54 (0.14)

Multiply actual flow rate times factor in table above to determine pressure drop with fluid at 32 cSt (150 SUS), 0.9 S.G. Correct for other fluids by multiplying new viscosity in cSt/32 (SUS/150) x new S.G./0.9. Note: factors are per 1000 L/min and per 1 US gpm.

Sample ?P calculation

G210 Series 8 in. length housing with P22 ports using KN grade media. Operating conditions 50 L/min (13 US gpm) flow rate using a hydraulic fluid at 45 cSt and specific gravity (s.g.) 1.2.

Total Filter ?P

• ?P housing + ?P element
• (0.50 x 1.2/0.9) bard (housing)
  • ((50 x 5.68/1000) x 45/32 x 1.2/0.9) bard (element)
• 0.67 bard (housing) + 0.53 bard (element)
• 1.2 bard (17.4 psid)

Housings, Vessels, or Assemblies

Housing P/N: H [1] G210 [2] [3] [4] [5] G [6] X160
Element P/N: HCG200F [4] [5] [1]
Seal P/N: G200SK [1]

Table 1: Seal Options

Code	Seal Material	Fluid Service
H	Nitrile	Water Glycol Emulsions Water - Oil Petroleum
Z	Fluorocarbon	Specified Synthetics

Table 2: Housing Port Style Options

Code	Port Style
A	Straight threads & 0-Ring boss to SAE J1926
M	Metric threads to BS3643
C	BSP threads to ISO228
P	Metric threads & O-Ring seal to ISO6149

Table 3: Housing Port Sizes Options

Code	Port Size	Styles Available
08	Nominally 1?2 in.	'C'
10	Nominally 5?8 in.	'A' & 'C'
22	M22x1.5-6H THD	'M' & 'P'

Table 4: Filter Element Options

Code	®x(c) ?1000 based on ISO 16889
KN	7
KS	12
KD	19
KT	22
++	No Element

Table 5: Length Options

Housing Code	Element Code	'L' Dim*
R	4	100.2 mm (3.95 in.)
S	8	192.9 mm (7.59 in.)

* Nominal length

Table 6: Differential Pressure Indicator Options

Code	Indicator	'H' Dim.
0	Unmachined indicator port	-
1	Machined port with plastic shipping plug	-
B	Bleed plug and seal in place of indicator	16
C	Electrical switch - normally closed, automatic reset Connection: Deutsch DT042P Reed switch operation suitable for low current applications	56
D	Visual indicator, red button rises 5mm on actuation, remains up until manually reset	23
P	Visual indicator with thermal lockout and manual reset No signal below 0 ®C , signal above 27 ®C Indicator includes clear plastic cover and internal dirt protection.	23
R	Electrical switch-SPDT with neon light indicator Connection: plug and socket as per DIN43650, ISO 4400, Hirschmann type (24 volt DC)	90
U	Electrical switch - normally closed, automatic reset Connection: AMP junior timer connector Reed switch operation suitable for low current applications	47