Description
Features:
Unique Operating Principle
The Pall HVP Purifier design can remove 100% free water and as much as 80% of dissolved water, 100% of free and entrained gases and up to 75% of dissolved gases. This is achieved without the need for excessive heat or high vacuum.
Unattended Operation
Automatic controls will safely shut down the system if fluid level is outside normal limits.
Service Indicators
An LCD panel displays all alarm conditions including possible cause and service requirements, where applicable.
Easily Portable
The HVP Purifier is compact and mounted on casters providing high mobility.
High Efficiency Particulate Filter
Solid particulate removal is achieved using an Ultipor III filter rated at βx(c)=1000. This provides clean fluid to the system while exhibiting long filter service life.
Overall Dimensions
HVP 903 - 79"H X 54"L X 31"W
(2.0m X 1.4m X 0.8m)
HVP 2703 - 79"H X 63"L X 42.5"W
(2.0m X 1.6m X 1.08m)
Designed for Simple Operation
Just plug into an electrical outlet, open inlet and outlet valves, and start motor, no adjustments are necessary. No water or air line connections are required.
Specifications
903: 15 gpm/903 gph (3400 l/hr.)
2703: 45 gpm/2703 gph (10,000 l/hr.)
Plumbing Requirements:
903:
Inlet 1-1/2" NPT
Outlet 1-1/4" SAE st. thd.
2703:
Inlet 2" NPT
Outlet 1-1/2" SAE st. thd.
Dimensions:
Length | Width | Height | |
903: | 54" | 31" | 79" |
(1.4m) | (0.8m) | (2.0m) | |
2703: | 63" | 42.5" | 79" |
(1.6m) | (1.08m) | (2.0m) |
Approximate Dry Weight:
903: 1400 lbs. (635 kg.)
2703: 2000 lbs. (907 kg.)
Motor(s):
903: 3 hp
2703: 7.5 hp and 1 hp
Heater Capacity:
902: 18 kW (maximum)
2702: 30 kW (maximum)
Chamber Vacuum:
15-22 in. Hg (380-560 mm Hg)
Maximum Viscosity:
1300 SUS (260 cSt)
Filtration:
Pall 8314 Series Ultipor® III medium with ßx(c)=1000 removal efficiency
Inlet Pressure:
15 inches Hg to 15 psig (380 mm Hg to 1 bar)
Maximum Outlet Pressure:
75 psig (5 bar)
Water Removal Rate:
The removal rate of free water will vary depending on the fluid properties (viscosity, basestock, additive, content) and application parameters (temperature, system volume, water content). In general, higher removal rates will be achieved with higher concentrations of water and higher temperatures. Depending on these conditions, free water removal rates of up to 18 gallons per day for the HVP902 (up to 40 gallons per day for the HVP2702) can be expected.
Performance
Type
Use
Ordering Information
Model No. | HVP-903 | |
| ||||
| HVP-2703 | Table1 | Table2 | Table3 | Table4 | Table5 |
|
TABLE 1: SUPPLY OPTIONS | |
Code | Supply Power (V/PH/HZ) |
---|---|
| |
220* | 220/3/60 |
| |
480 | 480/3/60 |
| |
575 | 575/3/60 |
| |
380 | 380/3/50 |
* Not available for HVP-2702. |
TABLE 2 | |
Code | Removal Rating Micron Size at Which ßx=200 |
---|---|
| |
KZ | 1 |
| |
KP | 3 |
| |
KN | 6 |
TABLE 3: SEAL OPTIONS | |
Code | Seals |
---|---|
| |
H | Buna N |
| |
Z | Fluorocarbon |
TABLE 4 | |
Code | Wheel Configuration |
---|---|
| |
W | Caster wheels (standard) |
| |
P | Pneumatic wheels |
| |
F | Floor mount |
TABLE 5 | |
Code | Condenser |
---|---|
| |
C | Condenser |
| |
N* | No condenser |
* Condenser is standard on the HVP-2703 |
Reviews
We appreciate your review of this product. Please login to your account to leave a review.