4610/11/14 Series Filter Assemblies product photo Primary L

4610/11/14 Series Filter Assemblies

Featuring Coreless Element Technology
Flows to 70 gpm (265 L/min)
Pressures to 6500 psi (450 bar)
Port sizes: 1" and 1-1/4


* Required
Need Help?
Description
Featuring Coreless Element Technology
Flows to 70 gpm (265 L/min)
Pressures to 6500 psi (450 bar)
Port sizes: 1" and 1-1/4
Specifications

Features

  • Optional Differential Pressure Devices
  • Patented Sealing Interface - Positive sealing with standard O-rings
  • Forged Steel Bowl
  • Ductile Iron Head
  • Full Flow Fast Response Bypass Valve
  • Sampling or Bleed Port
  • Ultipor® III Element
  • Optional ¼" Drain Port

Maximum Acceptable Working Pressure:

6500 psi (450 bar)

Fatigue Pressure Rating:

(NFPA/T2.6.1-1991 category B/90)
5800 psi (400 bar) Stainless steel indicators required above 3000 psi (207 bar) RFP

Typical Burst Pressure:

23,000 psi (1600 bar)

Filter Element Collapse Pressure:

290 psid (20 bar) minimum per ISO 2941

Temperature Range:

Nitrile seals -45°F to 225°F (-43°C to 107°C)
Fluorocarbon seals -20°F to 250°F (-29°C to 120°C)
140°F (60°C) maximum in HWCF or water-glycol fluids

Dry Weights:

S length– 33 lbs. (15 kg)
T length– 39 lbs. (17.7 kg)

Filter Element Collapse Pressure:

9100–290 psid (20 bar)
9101–3000 psid (207 bar)
9104–150 psid (10 bar)


Dimensional Drawings

 

Performance

Element Pressure Drop Factor

Multiply actual flow rate times factor to determine pressure drop with fluid at 150 SUS (32 cSt), 0.9 S.G.
Correct for other viscosities by multiplying new viscosity in SUS/150 x new S.G/0.9.


9100/9104 Series Element P factor (psid/gpm)

Length
KZ
KP
KN
KS
KT

8"

0.53
0.25
0.21
0.16
0.11

13"
0.32
0.14
0.11
0.09
0.06

9101 Series Element P factor (psid/gpm)

Length

DP
DT

8"
0.55
0.23

13"
0.34
0.16

Type
Assemblies, Filter Housings
Use
Filtration, Polishing, Prefiltration, Removal
Ordering Information

Assembly P/N:     

H

461

3

 

 

Table1
Table2
Table3
Table4
Table5
Table6
Table7
Table8

Element P/N:       

HC

910

F

 

 

 

 

 

Table2
 
Table5
Table6
Table1

 

 

 


 
Note: Choose from the options in the following tables to compile the specific Product Number.

TABLE 1: SEAL OPTIONS

Code

Seals

H

Nitrile

Z

Fluorocarbon

 

TABLE 2: ELEMENT OPTIONS
Code
Rating

0

290 psid (standard)

1

3000 psid (high collapse)

4

150 psid (coreless)


 

TABLE 3: PORT STYLE OPTIONS

Code

Port Style

A

SAE J514 straight thread

D

Flange SAE J518c-Code 61

E
Flange SAE J518c-Code 62

 

TABLE 4: PORT SIZE OPTIONS

Code

Size

16

1"

20

1-1/4"

 

TABLE 5: FILTER ELEMENT OPTIONS

Code

ßx  200

ßx(c)=1000

KZ

<1

2.5

KP

3

5

KN

6

7

KS

12

12

KT

25

22

DP*
3

5

DT*
17

15

*4611 only
*Indicators fatigue rated at 3000 psi. For cyclic pressures above 3000 psi, stainless steel indicators are necessary. Designate with an ‘H’ in model Code (e.g., PH, DH, etc.).

 

TABLE 6: LENGTH OPTIONS*

Assembly Code
Element Code**

S
8

T
13

* Use Code in second column for element part no.
** Nominal length in inches.

 

TABLE 7: BYPASS VALVE OPTIONS
Code
Description

B
50 psid- 4610/14 only

C
50 psid bypass with reverse flow-4610 only

W
Non-bypass- 4611 only

K
Non-bypass with reverse flow-4611 only

 

TABLE 8: DIFFERENTIAL PRESSURE DEVICE OPTIONS
Code
Description
P
Visual indicator with thermal lockout

D
Visual indicator with no thermal lockout

L
Electrical switch (SPDT) with 6" leads

T
Electrical switch with DIN connector

M
‘T’ type switch with matching wiring cap

S
Electrical switch with MS receptacle

V
Combined visual/electrical with DIN connector

B
Plug in place of indicator

2
‘P’ and ‘L’

3
‘P’ and ‘S’

Application
Midstream Process Water, Mining Equipment Gear Case, Mining Equipment Hydraulic Fluid, Mining Euqipment Lube Oil - on & off board, Mining Final Product (Post Smelt/Burn off Impurities), Mining Final Product (Slurry), Mining Wastewater, Municiple Mining Water [Rinsing] , Heavy Fuel, Heavy Hydraulic, Heavy Lubrication, Medium & Light Fuel, Medium & Light Hydraulic, Medium & Light Lubrication, Coolants / Bearing Lubrication, Coolants / Bearing Lubrication, Drives Gear Box + Roll Housing, Drives Gear Box + Roll Housing, Forging / Extrusion, Forging / Extrusion, Gear Box / Bearing, Gear Box / Bearing, Gear Box / Morgoil, Gear Box / Morgoil, Material Directional Control, Material Directional Control, Material Handling, Material Handling, Non Contact, Non Contact, Quenching / Cleaning, Quenching / Cleaning, Roll Bite (Safety Filter), Roll Bite (Safety Filter), Shape + Material Handling, Shape + Material Handling, Auto Painting/Coating Zinc Phosphate Bath, Medium & Light Hydraulic, Medium & Light Lubrication, Midstream Process Water
Segment
General Industrial
Industrial and Mobile OEM
Mining
Primary Metals