Pall-Fit™ Elements for Commercial Filters and Cuno, Inc. Filter Housings (2.5" OD) product photo Primary L

Pall-Fit™ Elements for Commercial Filters and Cuno, Inc. Filter Housings (2.5" OD)

Upgrade Common 2.5" OD (Multiple 9-3/4" Length) Elements to Pall Ultipor® III Media

Pall-Fit elements allow you to use Pall Ultipor filters in your existing filter housings. Ultipor filters optimize efficiency and service life, while maintaining low differential pressure and high strength. This allows you to economically achieve superior system cleanliness for maximum protection.


* Required
Need Help?
Description
Upgrade Common 2.5" OD (Multiple 9-3/4" Length) Elements to Pall Ultipor® III Media

Pall-Fit elements allow you to use Pall Ultipor filters in your existing filter housings. Ultipor filters optimize efficiency and service life, while maintaining low differential pressure and high strength. This allows you to economically achieve superior system cleanliness for maximum protection.
Specifications
Filter Construction:
Ultipor III–Upstream and downstream nylon support mesh. Each pleat firmly bonded to helical wrap for superior stability.

Filter Element Hardware:
Corrosion protected steel end caps and core.

Fluid Compatibility:
(per ISO 2943)
Compatible with petroleum oils, water-glycols, water-oil emulsions, and HWCF.
Use fluorocarbon seals for industrial phosphate esters, diesters, and specified synthetics.

Temperature range:
Nitrile seals -45°F to 225°F.
Fluorocarbon seals -20°F to 250°F.
140°F max. in water based fluids.

Collapse Pressure:
Rating (per ISO 2941)
150 psid minimum

Multipass Filtration Ratings:
(per ISO 16889)

 

Performance
Technical Information
Pall
Media Grade
µm Rating for ß Value
ß=200
µm(c) Rating for ß Value
ß=2 ß=10 ß=75 ß=100 ß=200 ß=1,000
Ultipor III
KN 6 2.1 3.4 5.0 5.2 5.7 7
KS 12 3.2 5.5 8.3 8.7 9.7 12

Type
Cartridges and Elements
Ordering Information
Assembly P/N:     

HC2225F

 

 

 

Table1
Table3
Table2

Note: Choose from the options in the following tables to compile the specific Product Number.

 
Table 1: MEDIA OPTIONS

Code

ßx  200

ßx(c) = 1000

KN

6

7

KS

12

12


Table 2: Seal Options
Code Seals
H Nitrile
Z Fluorocarbon

Table 3: Length Options*

Length Code

Element Code**

9

9.75

29

29.25

39

39.00

* Use code in second column for element part no.
** Nominal length in inches.

 

 

ELEMENT PRESSURE DROP FACTOR (psid/gpm)
Part Number
KN
KS

HC2225F**9H
0.16
0.11

HC2225F**29H
0.05
0.04

HC2225F**39H
0.04
0.03

 
Application
Auto LOH for Stamping, Heavy Lubrication, Material Handling, Auto Painting/Coating Zinc Phosphate Bath, Midstream Process Water, Midstream Process Water, Midstream Process Water, Midstream Process Water, Midstream Process Water, Midstream Process Water, Mining Equipment Gear Case, Mining Equipment Gear Case, Mining Equipment Hydraulic Fluid, Mining Equipment Hydraulic Fluid, Mining Euqipment Lube Oil - on & off board, Mining Euqipment Lube Oil - on & off board, Mining Final Product (Post Smelt/Burn off Impurities), Mining Final Product (Post Smelt/Burn off Impurities), Mining Final Product (Slurry), Mining Final Product (Slurry), Mining Wastewater, Mining Wastewater, Municiple Mining Water [Rinsing] , Municiple Mining Water [Rinsing] , Heavy Fuel, Heavy Hydraulic, Heavy Lubrication, Medium & Light Fuel, Medium & Light Hydraulic, Medium & Light Lubrication, Pulp&Paper Bleach Chemical Prep, Pulp&Paper LOH, Pulp&Paper Machine Process Application, Pulp&Paper Paper Coating, Pulp&Paper Pulp Screening