UH210 Series Athalon® High Pressure Manifold Mount Filters product photo Primary L

UH210 Series AthalonĀ® High Pressure Manifold Mount Filters

Athalon™ maximum-life filters deliver the highest level of sustained fluid system protection, across all applications, regardless of severity. Featuring an industry leading BetaX(C) = 2000* filter efficiency; the highest rated filter performance available today.
(* per ISO 16889)
  • Keeps fluids the cleanest, longest, for the greatest value
  • Provides consistent, reliable, protection of system components over the full service life of the filter element
  • Rapidly achieves and sustains required fluid system cleanliness
  • Delivers maximum filter capacity in the smallest footprint
  • Prevents electrostatic discharge from damaging your filter and degrading your fluid

Features

  • Patented Ultipleat (laid-over pleat) filter medium pack
  • Pall Stress-Resistant Technology (SRT) Media
  • Coreless filter element configuration
  • Low clean pressure drop for low energy operation


* Required
Need Help?
Download Datasheet
Description
Athalon™ maximum-life filters deliver the highest level of sustained fluid system protection, across all applications, regardless of severity. Featuring an industry leading BetaX(C) = 2000* filter efficiency; the highest rated filter performance available today.
(* per ISO 16889)
  • Keeps fluids the cleanest, longest, for the greatest value
  • Provides consistent, reliable, protection of system components over the full service life of the filter element
  • Rapidly achieves and sustains required fluid system cleanliness
  • Delivers maximum filter capacity in the smallest footprint
  • Prevents electrostatic discharge from damaging your filter and degrading your fluid

Features

  • Patented Ultipleat (laid-over pleat) filter medium pack
  • Pall Stress-Resistant Technology (SRT) Media
  • Coreless filter element configuration
  • Low clean pressure drop for low energy operation
Specifications

Notes and Specifications Filter Housing

  • Flows to 230 L/min (60 US gpm)
  • Pressures to 414 bar (6000 psi)
  • Port Size 1¼”
  • Rated Fatigue Pressure:
    0-240 bar (3500 psi) per NFPA T2.06.01R2-2001 CAT C/90/*(1 million cycles), verified by testing at 0-280 bar (4050 psi) for 1 million cycles. Contact Pall for applications with higher pressures at lower cycles.
  • Filter Element Burst Pressure:
    10 bard (150 psid)
  • Fluid Compatibility:
    Compatible with all petroleum oils and most water glycols, water-oil emulsions, and synthetic hydraulic and lubrication fluids
  • Temperature Range:
    Fluorocarbon Seals:
    -29 ?C to 120 ?C (-20 ?F to 248 ?F)
    60 ?C (140 ?F) maximum in HWCF or water glycol fluids
  • Bypass Valve Setting:
    4.5 bard (65 psid)
  • Indicator Pressure Setting:
    3.5 bard (50 psid)
  • Materials of Construction:
    Head and Cover: Ductile Cast Iron Tube: Carbon steel
  • Filter Element :
    Inorganic fibers impregnated and bonded with epoxy resins. Polymer endcaps. Anti-static media design

Dimensional Drawings

Dimensions in mm (inches)
 
Length Code Overall length mm (in) Cover Service
Element Removal
Clearance mm (in)
Head Service
Element Removal
Clearance mm (in)
Empty Weight kg (lb)
K S K S
04 358.9 (14.13) 320.4 (12.61) 147 (5.79) 143 (5.63) 12.9 (28.4) 12.3 (27.1)
08 460.9 (18.15) 422.0 (16.61) 248 (9.76) 243 (9.57) 14.7 (32.4) 14.1 (31.1)
13 595.1 (23.43) 556.6 (21.91) 383 (15.08) 380 (14.96) 17.1 (35.1) 16.7 (36.8)
20 765.3 (30.13) 726.8 (28.61) 553 (21.77) N/A 20.4 (45.0) 19.8 (43.7)
 


K20 OPTION SHOWN



S20 OPTION SHOWN



The equipment has been assessed in accordance with the guidelines laid down in The European Pressure Directive 97/23/EC and has been classified within Sound Engineering Practice S.E.P. Suitable for use with Group 1 and 2 fluids only. Consult Sales for other fluid gas group suitability.




Performance

Pressure Drop Information

Housing pressure drop using fluid with 0.9 S.G.
Housing pressure drop is directly proportional to specific gravity.



Element Pressure Drop

210 Series Filter Elements – bard/1000 L/min (psid/US gpm)

 
Length Code AZ AP AN AS AT
04 20.07 (1.102) 8.51 (0.467) 5.72 (0.314) 3.55 (0.195) 2.69 (0.029)
08 9.93 (0.545) 4.21 (0.231) 2.83 (0.155) 1.76 (0.096) 1.33 (0.073)
13 5.95 (0.327) 2.52 (0.139) 1.70 (0.093) 1.05 (0.058) 0.80 (0.044)
20 3.95 (0.217) 1.68 (0.092) 1.13 (0.062) 0.70 (0.038) 0.53 (0.029)
 

Multiply actual flow rate times factor in table below to determine pressure drop with fluid at 32 cSt (150 SUS), 0.9 S.G. Correct for other fluids by multiplying new viscosity in cSt/32 (SUS/150) x new S.G./0.9. Note: factors are per 1000 L/min and per 1 US gpm

Sample ΔP calculation

UH210 Series 13” length housing with S20 side manifold flange using AN grade media. Operating conditions 100 L/min flow rate using a hydraulic fluid of 50 cSt and specific gravity (s.g.) 1.2.

Total Filter ΔP
= ΔP housing + ΔP element
= (0.27 x 1.2/0.9) bard (housing)
+ ((100 x 1.70/1000) x 50/32 x 1.2/0.9) bard (element)
= 0.36 (housing) + 0.35 bard (element)
= 0.71 bard (10.3 psid)
Type
Filter Housings
Use
Filtration
Ordering Information

For new installations, select one complete part number from each section below

Section 1 Housing P/N: UH210 [Table A] [Table B]


Note: Pall Athalon filter housings are supplied without filter elements or warning devices fitted. Never operate the filter unless a filter element is fitted and all warning device ports are sealed.

Note: Z indicates fluorocarbon seals are standard. Other options are available; contact Pall. Housing P/N designates indicator port fitted with a plastic shipping plug.

 
Table A Table B
Port & Length Options Bypass & Orientation Options
Tables 1, 2 and 3 Table 4
K2004Z G3 or G6
K2008Z G3 or G6
K2013Z G3 or G6
K2020Z G3 or G6
S2004Z G3, G6, G3H, or G6H
S2008Z G3, G6, G3H, or G6H
S2013Z G3, G6, G3H, or G6H
S2020Z G3 or G6
 

Table 1: Housing Port Options

 
Code Port Style Max. Operating Pressure
K Top manifold mount 414 bar (6000 psi)
S Side manifold mount 414 bar (6000 psi)
 

Table 2: Port Size

 
Code Port Style
20 1 14” nominal
 

Table 3: Housing Length and Seal Options

 
Code Length and Seal Material
04Z 4” nominal length, fluorocarbon seals
08Z 8” nominal length, fluorocarbon seals
13Z 13” nominal length, fluorocarbon seals
20Z 20” nominal length, fluorocarbon seals
 

Table 4: Bypass Valve and Service Options

 
Code Bypass Valve and Service Type
G3 4.5 bard (65 psid) bypass valve, Cap service, metric port
G3H 4.5 bard (65 psid) bypass valve, Head service, metric port
G6 4.5 bard (65 psid) bypass valve, Cap service, imperial port
G6H 4.5 bard (65 psid) bypass valve, Head service, imperial port
 

Seal Kit P/N: SH 210 SKZ

*Other seal material options are available; Contact Pall.

Section 2 Element P/N: UE 210 [Table 5] [Table 3]


Note: Z indicates fluorocarbon seals are standard.
Other options are available; contact Pall.

Table 5: Filter Element Options

 
Code ßx(c) ≥2000 based on ISO 16889 CST Rating*
AZ 3 07/04/01
AP 5 11/08/03
AN 7 13/09/04
AS 12 15/11/06
AT 25 16/14/08
 
* CST: Cyclic Stabilization Test to determine filter rating under stress conditions, based on SAE ARP4205


Section 3 (At least one Differential Pressure Indicator or ‘B’ type blanking plug must be ordered)

Differential Pressure Indicator P/N:
RC
[Table 6] Z091 Z [Table 7]


Note: If no differential pressure indicator is selected, ‘B’ type blanking plug (P/N HC9000A104Z) must be ordered separately and fitted to replace the plastic shipping plug.

Note: Z indicates fluorocarbon seals are standard. Other options are available; contact Pall.

Table 6: Indicator Options

 
Code Brass Option indicator
A218M Electrical switch (SPDT) with Hirschmann connector
A218R Electrical switch (SPDT) with Hirschmann connector with Red and Green LED indicators
A219D Visual indicator
 
 
Code Stainless Steel indicator
778NZ Visual filter with thermal lockout
861CZ Electrical Switch (SPDT) with 6” leads
861CZ* Electrical switch (SPDT) with Hirschmann connector
771BZ Electrical switch (SPDT) with 3-pin
 
Other options available; contact Pall.
* Requires YM suffix after SS code from Table 7.


Table 7: Differential Pressure Indicator Material

 
Code Pressure Setting
Omit Brass Indicator
SS Stainless Steel Indicator: recommended for high pressure cycle applications with pressure > 200 bar (3000 psi)
 

Other setting options are available; contact Pall.
Application
Auto LOH for Stamping, Auto LOH-Filling Lines, Mining Equipment Gear Case, Mining Equipment Hydraulic Fluid, Mining Euqipment Lube Oil - on & off board, Heavy Hydraulic, Heavy Lubrication, Medium & Light Hydraulic, Medium & Light Lubrication, Coolants / Bearing Lubrication, Drives Gear Box + Roll Housing, Forging / Extrusion, Gear Box / Bearing, Gear Box / Morgoil, Material Directional Control, Material Handling, Non Contact, Medium & Light Hydraulic, Medium & Light Lubrication
Segment
Automotive
General Industrial
Industrial & Mobile OEM
Mining
Primary Metals