Supralon™ deliver consistent, high level fluid system protection across all applications, regardless of severity. Supralon filters feature BetaX(C) >2000 filter efficiency, low pressure drop and long service life.
- Flows to 565 lpm (150 US gpm)
- Pressures to 420 bar (6100 psi)
- Port size 1 1⁄4 in. & 1 1⁄2 in.
Notes and Specifications
- Fatigue Pressure Rating:
275 bar (4000 psi) per NFPA T2.6.1 R2-2001 Cat C/90
- Typical Burst Pressure:
1,260 bar (18,000 psi)
- Filter Element Collapse Pressure:
207 bard (3000 psid)
- Fluid Compatibility:
Compatible with all petroleum oils and most water glycols, water-oil emulsions, and synthetic hydraulic and lubricating fluids
- Temperature Range:
-43˚ C to 107˚ C (-45˚ F to 225˚ F) – Nitrile seals
-29˚ C to 120˚ C (-20˚ F to 225˚ F) – Fluorocarbon seals
60˚ C (140˚ F) maximum in HWCF or water glycols
- Bypass Valve Setting:
- Indicator Pressure Setting:
7 bard (100 psid)
- Housing Materials of Construction:
Ductile iron head; steel bowl
Dimensions in mm (inches)
Pressure Drop InformationHousing pressure drop using fluid with 0.9 S.G.
Housing pressure drop is directly proportional to specific gravity.
Element Pressure Drop
Multiply actual flow rate times factor in table below to determine pressure drop with fluid at 32 cSt (150 SUS), 0.9 S.G. Correct for other fluids by multiplying new viscosity in cSt/32 (SUS/150) x new S.G./0.9.
9601 Series Element
DP Factors (psid/gpm)
For new installations, select one complete part number from each section below
Section 1 Housing P/N:Note: Pall filter housings are supplied without filter elements or filter change out warning devices. Never operate the filter housing unless a filter element is fitted and all warning device ports are sealed.
Housing part number designates indicator port is fitted with a plastic shipping plug.
|Part Number||Part Number|
|Part Number (Description) Breakdown|
|HH = housing with nitrile seals|
|HZ = housing with fluorocarbon seals|
|9681 = 9681 Series housing|
|C20 = 1¼” BSP ISO 228 threads|
|C24 = 1½” BSP ISO 228 threads|
|G20 = 1¼” ISO 6162 split flange ports (400 bar/5800 psi max pressure)|
|K20 = 1¼” Top Manifold Mount|
|S20 = 1¼” Side Manifold Mount|
|S = 8” nominal length|
|T = 13” nominal length|
|U = 16” nominal length|
|W = Non-bypass|
|1 = 1 indicator warning device port|
Section 2 Differential Pressure IndicatorHC9601 F [Table 1] [Table 2] Z Table 1:
Filter Performance Ratings
|Code||ßx(c) ≥1000 per ISO 16889|
|8||8” nominal length|
|13||13” nominal length|
|16||16” nominal length|
Section 3 Differential Pressure IndicatorP/N: RC [Table 3] Z 097 Z [Table 4]
Note: If no Differential Pressure Indicator is selected, ‘B’ type blanking plug (P/N HC9000A104Z) must be ordered separately and fitted to replace the shipping plug.
Note: Z indicates fluorocarbon seals are standard. Other options are available; contact Pall.
Table 3: Indicator Options
|Code||Brass Option Indicator|
|A218M||Electrical switch (SPDT) with Hirschmann connector|
|A218R||Electrical switch (SPDT) with Hirschmann connector with Red and Green LED indicators|
|Code||Stainless Steel Option Indicator|
|778N||Visual filter with thermal lockout|
|861C||Electrical switch (SPDT) with Hirschmann connector|
|771B||Electrical switch (SPDT) with 3-pin|
Table 4: Differential Pressure Indicator Material
|Omit||If Brass Indicator is selected in Table 3|
|SS||If Stainless Steel Indicator is selected in Table 3 (recommended for high pressure applications with pressure > 200 bar (3000 psi)|