UR210 Series Athalon® Return Line Filters product photo Primary L

UR210 Series Athalon® Return Line Filters

Athalon™ maximum-life return line hydraulic filters assembly delivers the highest level of sustained fluid system protection, across all applications, regardless of severity.

Featuring an industry leading BetaX(C)=2000* filter efficiency; the highest rated filter performance available today.
(* per ISO 16889)

  • Keeps fluids the cleanest, longest, for the greatest value
  • Provides consistent, reliable, protection of system components over the full service life of the filter element
  • Rapidly achieves and sustains required fluid system cleanliness
  • Delivers maximum filter capacity in the smallest footprint
  • Prevents electrostatic discharge from damaging your filter and degrading your fluid

Features

  • Patented Ultipleat (laid-over pleat) filter medium pack
  • Pall Stress-Resistant Technology (SRT) Media
  • Coreless filter element configuration
  • Low clean differential pressure for low energy operation


Need Help?
Ask a Question
* Required

Documents

Datasheets

Download: English | Service Instructions

Description

Athalon™ maximum-life return line hydraulic filters assembly delivers the highest level of sustained fluid system protection, across all applications, regardless of severity.

Featuring an industry leading BetaX(C)=2000* filter efficiency; the highest rated filter performance available today.
(* per ISO 16889)

  • Keeps fluids the cleanest, longest, for the greatest value
  • Provides consistent, reliable, protection of system components over the full service life of the filter element
  • Rapidly achieves and sustains required fluid system cleanliness
  • Delivers maximum filter capacity in the smallest footprint
  • Prevents electrostatic discharge from damaging your filter and degrading your fluid

Features

  • Patented Ultipleat (laid-over pleat) filter medium pack
  • Pall Stress-Resistant Technology (SRT) Media
  • Coreless filter element configuration
  • Low clean differential pressure for low energy operation

Specifications

Specifications

  • Flows to 265 L/min (70 US gpm)
  • Pressures to 41 Bar (600 psi)
  • Port Size 1" and 1¼"
  • Rated Fatigue Pressure:
    41 bar (600 psi) per NFPA T2.06.01R2-2001 CAT C/90/*(1 million cycles), verified by testing at 0-48 bar (687 psi) for 1 million cycles. Contact Pall for applications with higher pressures at lower cycles
  • Filter Element Burst Pressure:
    10 bard (150 psid)
  • Fluid Compatibility:
    Compatible with all petroleum oils and most water glycols, water-oil emulsions, and synthetic hydraulic and lubrication fluids
  • Temperature Range:
    Fluorocarbon Seals:
    -29 ˚C to 120 ˚C (-20 ˚F to 248 ˚F)
    60 ˚C (140 ˚F) maximum in HWCF or water glycol fluids
  • Bypass Valve Setting:
    4.5 bard (65 psid) or 1.7 bard (25 psid)
  • Indicator Pressure Setting:
    3.5 bard (50 psid) or 1.1 bard (16 psid)
  • Materials of Construction:
    Head, cover and bowl: Aluminium
  • Filter Element :
    Inorganic fibers impregnated and bonded with epoxy resins.
    Polymer endcaps. Anti-static media design

Dimensional Drawings

Dimensions in mm (inches)

Performance

Pressure Drop Information

Housing pressure drop using fluid with 0.9 S.G.
Housing pressure drop is directly proportional to specific gravity.

Element Pressure Drop

210 Series Filter Elements – bard/1000 L/min (psid/US gpm)
 
Length Code AZ AP AN AS AT
08 9.93 (0.545) 4.21 (0.231) 2.83 (0.155) 1.76 (0.096) 1.33 (0.073)
13 5.95 (0.327) 2.52 (0.139) 1.70 (0.093) 1.05 (0.058) 0.80 (0.044)
20 3.95 (0.217) 1.68 (0.092) 1.13 (0.062) 0.70 (0.038) 0.53 (0.029)
 

Multiply actual flow rate times factor in table below to determine pressure drop with fluid at 32 cSt (150 SUS), 0.9 S.G. Correct for other fluids by multiplying new viscosity in cSt/32 (SUS/150) x new S.G./0.9. Note: factors are per 1000 L/min and per 1 US gpm

Sample ΔP calculation

UR210 Series 13" length housing with C20 BSPP ports using AN grade media. Operating conditions 120 L/min flow rate using a hydraulic fluid of 50 cSt and specific gravity (s.g.) 1.2.

Total Filter ΔP
= ΔP housing + ΔP element
= (0.18 x 1.2/0.9) bard (housing)
+ ((120 x 1.7/1000) x 50/32 x 1.2/0.9) bard (element)
= 0.24 (housing) + 0.43 bard (element)
= 0.67 bard (9.7 psid)

Type

Housings, Vessels, or Assemblies

Ordering Information

For new installations, select one complete part number from each section below

Section 1

Housing P/N: UR210 [Table A] [Table B]

Note: Pall Athalon filter housings are supplied without filter elements or warning devices fitted. Never operate the filter unless a filter element is fitted and all warning device ports are sealed.

Note: Z indicates fluorocarbon seals are standard. Other options are available; contact Pall. Housing P/N designates indicator port fitted with a plastic shipping plug.
 
Table A
Port & Length Options
Tables 1, 2 and 3
A1608Z
A1613Z
A2008Z
A2020Z
C1608Z
C1613Z
C2008Z
C2013Z
C2020Z
 

Table 1: Housing Port Options

 
Code Port Style Max. Operating Pressure
A SAE J1926 straight thread 41 bar (600 psi)
C BSP ISO 228 threads 41 bar (600 psi)
 

Table 2: Port Size

 
Code Port Style
16 1" nominal
20 1 1/4" nominal
 

Table 3: Housing Length and Seal Options

 
Code Length and Seal Material
08Z 8" nominal length, fluorocarbon seals
13Z 13" nominal length, fluorocarbon seals
20Z 20" nominal length, fluorocarbon seals
 

Table 4: Bypass Valve and Service Options

 
Code Bypass Valve and Service Type
A 1.7 bard (25 psid) bypass valve, Head service
G 4.5 bard (65 psid) bypass valve, Head service
 

Seal Kit P/N: SR210SKZ

Other seal material options are available; Contact Pall.

Section 2

Element P/N: UE 210 [Table 5] [Table 3]

Note: Z indicates fluorocarbon seals are standard.
Other options are available; contact Pall.

Table 5: Filter Element Options

 
Code ßx(c) ≥2000 based on ISO 16889 CST Rating*
AZ 3 07/04/01
AP 5 11/08/03
AN 7 13/09/04
AS 12 15/11/06
AT 25 16/14/08
 
* CST: Cyclic Stabilization Test to determine filter rating under stress conditions, based on SAE ARP4205

Section 3 (At least one Differential Pressure Indicator or 'B' type blanking plug must be ordered)

Differential Pressure Indicator P/N: RC [Table 6] Z [Table 7] Z

Note: If no differential pressure indicator is selected, 'B' type blanking plug (P/N HC9000A104Z) must be ordered separately and fitted to replace the plastic shipping plug.
Note: Z indicates fluorocarbon seals are standard. Other options are available; contact Pall.

Table 6: Indicator Options

 
Code Brass Option indicator
A218M Electrical switch (SPDT) with Hirschmann connector
A218R Electrical switch (SPDT) with Hirschmann connector with Red and Green LED indicators
A219D Visual indicator
 
Other options are available; contact Pall.

Table 7: Indicator Pressue Setting Option

 
Code Valve
084 For 'A' Valve Option - Housings (1.1 bard - 16 psid)
091 For 'G' Valve Option - Housings (3.5 bard - 50 psid)
 
Other setting options are available; contact Pall.