2804 Series Filter Assemblies product photo Primary L

2804 Series Filter Assemblies

Featuring Coreless Element Technology
Flows to 45 gpm (170 L/min)
Pressures to 600 psi (41.4 bar)
Port size 1"



* Required
Need Help?
Description
Featuring Coreless Element Technology
Flows to 45 gpm (170 L/min)
Pressures to 600 psi (41.4 bar)
Port size 1"

Specifications
Maximum Acceptable Working Pressure:
600 psi (41.4 bar)

Fatigue Pressure Rating:
400 psi (27.5 bar)
(106 cycles per NFPA T2.6.1-1991)

Typical Burst Pressure:
2000 psi (140 bar)

Temperature Range:
Nitrile seals -45°F to 225°F (-43°C to 107°C)
Fluorocarbon seals -20°F to 250°F (-29°C to 120°C)

Filter Element Collapse Pressure:
150 psid (10 bar)

Materials of Construction:
Cast Aluminum Head/Bowl

Fluid Compatibility:
Compatible with petroleum oils.
Not recommended for use with water based fluids.
Fluorocarbon seals are required for industrial phosphate esters, diesters and specified synthetics.

Dimensional Drawings

                       

Performance

Pressure Drop Information

 

Element Pressure Drop Factor.

Multiply actual flow rate times factor to determine pressure drop with fluid at 150 SUS (32 cST), 0.9 S.G.
Correct for other viscosities by multiplying new viscosity in SUS/150 x new S.G/0.9.

9104 Series Element P factor (psid/gpm)
Length
KZ
KP
KN
KS
KT
8"
0.53
0.25
0.21
0.16
0.11

Type
Assemblies, Filter Housings
Use
Filtration, Polishing, Prefiltration, Removal
Ordering Information
Assembly P/N: H Table 1 2804  A  16 S
   
Table1
     
Table2
 
Table3
Table4

Element P/N:   

HC

9104

 F

8

 

 

 

 

 

 

 

Table2

 

 

Table1

 

 

 


Note: Choose from the options in the following tables to compile the specific Product Number.

TABLE 1: SEAL OPTIONS
Code
Seals
H Nitrile
Z Fluorocarbon



TABLE 2: FILTER ELEMENT OPTIONS
Code

βx  200

βx(c)=1000
KZ <1 2.5
KP 3 5
KN 6 7
KS 12 12
KT 25 22



TABLE 3: BYPASS VALVE OPTIONS
Code
Description
A 25 psid
B 50 psid
W Non bypass


TABLE 4: DIFFERENTIAL PRESSURE DEVICE OPTIONS
Code
Description
P Visual indicator with thermal lockout
D Visual indicator with no thermal lockout
L Electrical switch (SPDT) with 6" leads
T Electrical switch with DIN connector
M 'T' type switch with matching cap
S Electrical switch with MS receptacle
V Combined visual/electrical with DIN connector
B Plug in place of indicator

Application
Auto LOH for Stamping, Heavy Lubrication, Material Handling, Auto Painting/Coating Zinc Phosphate Bath, Midstream Process Water, Midstream Process Water, Midstream Process Water, Midstream Process Water, Midstream Process Water, Mining Equipment Gear Case, Mining Equipment Hydraulic Fluid, Mining Euqipment Lube Oil - on & off board, Mining Final Product (Post Smelt/Burn off Impurities), Mining Final Product (Slurry), Mining Wastewater, Municiple Mining Water [Rinsing] , Coolants / Bearing Lubrication, Coolants / Bearing Lubrication, Drives Gear Box + Roll Housing, Drives Gear Box + Roll Housing, Forging / Extrusion, Forging / Extrusion, Gear Box / Bearing, Gear Box / Bearing, Gear Box / Morgoil, Gear Box / Morgoil, Material Directional Control, Material Directional Control, Material Handling, Material Handling, Non Contact, Non Contact, Quenching / Cleaning, Quenching / Cleaning, Roll Bite (Safety Filter), Roll Bite (Safety Filter), Shape + Material Handling, Shape + Material Handling, Pulp&Paper Bleach Chemical Prep, Pulp&Paper LOH, Pulp&Paper Machine Process Application, Pulp&Paper Paper Coating, Pulp&Paper Pulp Screening
Segment
Automotive
Mining
Primary Metals
Pulp & Paper