Pall-Fit™ Elements for PTI and Mahle Filter Housings product photo Primary L

Pall-Fit™ Elements for PTI and Mahle Filter Housings

Upgrade PTI or Mahle Filter Elements to Pall Ultipor® III or Dirt-Fuse® Filter Media

Pall-Fit elements allow you to use Pall Ultipor filters in your existing filter housings. Ultipor filters optimize efficiency and service life, while maintaining low differential pressure and high strength. This allows you to economically achieve superior system cleanliness for maximum protection.

 



* Required
Need Help?
Description
Upgrade PTI or Mahle Filter Elements to Pall Ultipor® III or Dirt-Fuse® Filter Media

Pall-Fit elements allow you to use Pall Ultipor filters in your existing filter housings. Ultipor filters optimize efficiency and service life, while maintaining low differential pressure and high strength. This allows you to economically achieve superior system cleanliness for maximum protection.

 

Specifications
Filter Medium:
Inert inorganic fibers, in a tapered pore structure impregnated and bonded with epoxy resin.

Filter Construction:
Ultipor III – Upstream and downstream nylon support mesh. Each pleat firmly bonded to helical wrap for superior stability.
Dirt-Fuse – Upstream and downstream wire support mesh.

Filter Element Hardware:
Corrosion protected steel end caps and core.

Fluid Compatibility:
(per ISO 2943)
Compatible with petroleum oils, water glycols, water-oil emulsions, and HWCF.
Use fluorocarbon seals for industrial phosphate esters, diesters, and specified synthetics.

Temperature range:
Nitrile seals -45°F to 225°F 
Fluorocarbon seals -20°F to 250°F
140°F max. in water based fluids.

Collapse Pressure Rating:
(per ISO 2941)
290 psid – 2235 series (KP, KN, KS, Media Grades)
3000 psid – 2236 series (DP, DT Media Grades)

Multipass Filtration Ratings:
(per ISO 16889)
Type
Cartridges and Elements
Ordering Information
Standard Collapse ElementsDimensions
(in inches)
PTI
Part No.
Mahle
Part No.
Pall
Part No.
ßx=200 (µm)DP Factor psid/gpm (150 SUS)ODLengthID
PG-050-GH-B PI2115 HC2235FKP6 3 0.21 3.4 5.6 1.88
PG-050-HH-B PI3115 HC2235FKN6 6 0.16 3.4 5.6 1.88
PG-050-KH-B HC2235FKS6 12 0.12 3.4 5.6 1.88
PG-050-JH-B PI4115 HC2235FKS6 12 0.12 3.4 5.6 1.88
PG-080-GH-B PI2130 HC2235FKP10 3 0.13 3.4 10.1 1.88
PG-080-HH-B PI3130 HC2235FKN10 6 0.09 3.4 10.1 1.88
PG-080-KH-B HC2235FKS10 12 0.07 3.4 10.1 1.88
PG-080-JH-B PI4130 HC2235FKS10 12 0.07 3.4 10.1 1.88
PG-120-GH-B PI2145 HC2235FKP15 3 0.10 3.4 14.7 1.88
PG-120-HH-B PI3145 HC2235FKN15 6 0.06 3.4 14.7 1.88
PG-120-KH-B HC2235FKS15 12 0.05 3.4 14.7 1.88
PG-120-JH-B PI4145 HC2235FKS15 12 0.05 3.4 14.7 1.88



High Collapse ElementsDimensions
(in inches)
PTI
Part No.
Mahle
Part No.
Pall
Part No.
ßx=200 (µm)DP Factor psid/gpm (150 SUS)ODLengthID
PG-050-GU-B PI2215 HC2236FDP6 3 0.68 3.4 5.6 1.88
PG-050-JU-B PI4215 HC2236FDT6 17 0.17 3.4 5.6 1.88
PG-080-GU-B PI2230 HC2236FDP10 3 0.41 3.4 10.1 1.88
PG-080-JU-B PI4230 HC2236FDT10 17 0.10 3.4 10.1 1.88
PG-120-GU-B PI2245 HC2236FDP15 3 0.32 3.4 14.7 1.88
PG-120-JU-B PI4245 HC2236FDT15 17 0.07 3.4 14.7 1.88
Application
Auto LOH for Stamping, Heavy Lubrication, Material Handling, Auto Painting/Coating Zinc Phosphate Bath, Midstream Process Water, Midstream Process Water, Midstream Process Water, Midstream Process Water, Midstream Process Water, Mining Equipment Gear Case, Mining Equipment Hydraulic Fluid, Mining Euqipment Lube Oil - on & off board, Mining Final Product (Post Smelt/Burn off Impurities), Mining Final Product (Slurry), Mining Wastewater, Municiple Mining Water [Rinsing] , Pulp&Paper Bleach Chemical Prep, Pulp&Paper LOH, Pulp&Paper Machine Process Application, Pulp&Paper Paper Coating, Pulp&Paper Pulp Screening, Auto Painting/Coating Zinc Phosphate Bath, Auto Painting/Coating Zinc Phosphate Bath, Medium & Light Hydraulic, Medium & Light Hydraulic, Medium & Light Lubrication, Medium & Light Lubrication, Midstream Process Water, Midstream Process Water