Free ground shipping on Laboratory products for registered Credit Card users.
Metricel® Polypropylene Membrane Disc Filters product photo Primary L

Metricel® Polypropylene Membrane Disc Filters

Pure Polypropylene Membrane for
Filtration of Aggressive Solvents

  • Pure polypropylene gives high chemical stability
  • Offers high temperature resistance and low extractable levels
“Pall Laboratory products are designed for laboratory applications only. This product is not approved for use in medical, clinical, surgical or other patient applications. If you require further assistance in product selection for your chosen application, please contact Labcustomersupport@pall.com or call 1-800-521-1520."


* Required
Need Help?

Disc Filters

List Price
$ 202.33
Description

Pure Polypropylene Membrane for
Filtration of Aggressive Solvents

  • Pure polypropylene gives high chemical stability
  • Offers high temperature resistance and low extractable levels
“Pall Laboratory products are designed for laboratory applications only. This product is not approved for use in medical, clinical, surgical or other patient applications. If you require further assistance in product selection for your chosen application, please contact Labcustomersupport@pall.com or call 1-800-521-1520."
Applications
  • Inherently hydrophobic.
  • Economical alternative to PTFE.
Specifications

Filter Media

  • Hydrophobic polypropylene

Pore Size

  • 0.1 μm

Typical Thickness

  • 89 μm (3.5 mils)

Typical Liquid Flow Rate - Isopropyl Alcohol

  • 1.9 mL/min/cm2 at 0.7 bar (70 kPa, 10 psi)

Typical Air Flow Rate

  • 0.8 L/min/cm2 at 0.7 bar (70 kPa, 10 psi)

Maximum Operating Temperature - Water

  • 82 °C (180 °F)

Minimum Bubble Point - Isopropyl Alcohol

  • 1.7 bar (170 kPa, 25 psi)

Sterilization

  • Provided non-sterile. Autoclavable if desired.
Type
Membrane Disc
Use
Microfiltration
Application
Airborne Contaminants Analysis
Segment
Environmental QC