Ultipleat® HP Filter product photo Primary L

Ultipleat® HP Filter

The Ultipleat HP filter is specifically designed for use in recirculating nickel plating baths to provide rapid bath clean-up. It is also ideally suited for use in recirculated cleaning baths of DI water and alkaline soaps.

Features and Benefits

  • Membrane wets out spontaneously in Ni plating and DI water + soap mixtures
  • Removal rating of 0.1 µm in recirculation mode; 0.2 µm in single pass
  • Very high flow rates
  • Exceptionally low differential pressure
  • Low extractables
  • 100% integrity tested
  • Serialized for traceability
  • Manufactured in cleanroom environment


Contact Us
* Required

Documents

Datasheets

Download: English

Description

The Ultipleat HP filter is specifically designed for use in recirculating nickel plating baths to provide rapid bath clean-up. It is also ideally suited for use in recirculated cleaning baths of DI water and alkaline soaps.

Features and Benefits

  • Membrane wets out spontaneously in Ni plating and DI water + soap mixtures
  • Removal rating of 0.1 µm in recirculation mode; 0.2 µm in single pass
  • Very high flow rates
  • Exceptionally low differential pressure
  • Low extractables
  • 100% integrity tested
  • Serialized for traceability
  • Manufactured in cleanroom environment

Specifications

Materials

  • Medium: Hydrophilic, highly asymmetric polysulfone
  • Core, Cage, End Caps: Polypropylene
  • Support and Drainage: Polypropylene
  • O-Ring: fluoro-polymer encapsulated fluoroelastomer

Removal Ratings

  • 0.1 μm in recirculation mode; 0.2 μm in single pass

Filter Area

  • AB2 style: 1.64 m2 / 17.6 ft.2

Configurations

  • Nominal Length: AB2: 508 mm / 20 in. 
  • Diameter: 70 mm / 2.75 in.
  • O-Ring Size/End Caps: Code 3 (222 double O-ring / flat end)

Operating Conditions

  • Maximum Operating Temperature: 90 °C / 194 °F
  • Maximum Forward Differential Pressure: 0.2 MPa @ 90 °C / 30 psid @ 194 °F

Performance

Pressure Drop vs. Liquid Flow Rate1

1For liquids with viscosity differing from water, multiply the pressure by the viscosity in centipoise.

Type

Filter Cartridges

Ordering Information

Part Number Removal Rating (μm) Nominal Length (mm / in.) Configuration Code O-Ring Material
 AB2UHPA3EH1  0.1 μm in
 recirculation mode
 0.2 μm in
 single pass mode
 508 / 20  3  Teflon
 encapsulated 
 fluoroelastomer

Reviews

We appreciate your review of this product. Please login to your account to leave a review.