1. Home/
  2. Microelectronics/
  3. Data Storage/
  4. Wet etch & cleans/
  5. Ultipleat® PC Filter
Ultipleat® PC Filter product photo Primary L

Ultipleat® PC Filter

The Ultipleat®PC filter is specifically recommended for component parts cleaning applications where high flow rates, together with a 0.1 μm / 0.2 μm particle removal ratings, are required. The PTFE filter membrane is incorporated in a unique, crescent-shaped or laid-over pleat geometry to provide an increase in effective filtration area and service life.
 
Features Benefits
Ultipleat construction
  • High flow rates – ideal for 7G and 8G processes
  • Smaller footprint
  • Lower capital, installation and change-out costs
  • Longer service life
PTFE and polypropylene materials
  • Broad chemical compatibility
No surfactants or binder resins
  • Very low extractables
 
Read More


Contact Us
* Required

Datasheets

Download: English | Japanese
The Ultipleat®PC filter is specifically recommended for component parts cleaning applications where high flow rates, together with a 0.1 μm / 0.2 μm particle removal ratings, are required. The PTFE filter membrane is incorporated in a unique, crescent-shaped or laid-over pleat geometry to provide an increase in effective filtration area and service life.
 
Features Benefits
Ultipleat construction
  • High flow rates – ideal for 7G and 8G processes
  • Smaller footprint
  • Lower capital, installation and change-out costs
  • Longer service life
PTFE and polypropylene materials
  • Broad chemical compatibility
No surfactants or binder resins
  • Very low extractables
 
Materials of Construction
Filter Membrane PTFE
Support and drainage Polypropylene
Core and cage Polypropylene
End caps Polypropylene
AB style cartridges only
O-ring options FEP encapsulated fluoroelastomer (standard), ethylene propylene, or fluoroelastomer
PUY style cartridges only
Gasket options Ethylene propylene,
fluoroelastomer, polypropylene
 

Removal Rating: 0.1 μm , 0.2 μm

Filter area: 0.23 m2 / 2.5 ft2

Configurations
Nominal length 254 mm / 10 in.
Nominal diameter AB: 70 mm / 2.75 in,
PUY: 64 mm / 2.5 in.
 

Operating Conditions1


Maximum operating temperature: 70 ˚C / 158 ˚F

Maximum differential pressure Operating Temperature
0.55 MPa / 80 psi 20 ˚C / 68 ˚F
0.31 MPa / 45 psi 70 ˚C / 158 ˚F
 
1For compatible liquids

Pressure Drop vs. Liquid Flow Rate (Water, 20°C)2


2 For Liquids with a viscosity differing from water, multiply the pressure drop by the viscosity in centipoises.
Filter Cartridges

Part Numbers / Ordering Information

AB [1] PC [2] [3] [4]

PUY [1] PC [2] [5]

Table 1

 
Code Length (mm / in.)
1 254 / 10
2 508 / 20
3 762 / 30
 

Table 2

 
Code Removal Ratings
001 0.1 μm
002 0.2 μm
 

Table 3

 
Code O-ring Size
3 AS568A - 222
7 AS568A - 226
 

Table 4

 
Code O-ring Seal
J Ethylene propylene
H Fluoroelastomer
H1 FEP encapsulated fluoroelastomer3
 

Table 5

 
Code Gasket Seal
J Ethylene propylene
H Fluoroelastomer
Y1 Polypropylene
 

3 Standard O-ring for AB style filter cartridge


For availability of specific options and housing details, please contact your Pall Corporation representative

We appreciate your review of this product. Please login to your account to leave a review.