Acro® 50 LCF Filter Assembly product photo Primary L

Acro® 50 LCF Filter Assembly

The Acro® 50 Last Chance Filter (LCF) Assembly is designed for the filtration of color resist at the coater, to remove contamination generated by system components, such as pumps and valves.

The Acro 50 filter's sturdy construction allows for operating pressures, up to 0.2 MPa.

Its rigid housing design prevents internal volume expansion and contraction during pump cycles, resulting in consistent dispense volumes with no passive liquid flow after the pump has stopped.

  • Reproducible and accurate output volumes with excellent pump cycle response
  • Compact size
  • All polypropylene materials
  • High efficiency filter media
  • Excellent compatibility with LCD color resist chemicals
  • Very low hold-up volume minimizes fluid loss during filter change-out
  • Fast and easy filter change-out
  • High productivity with minimal yield problems


* Required
Need Help?
Download Datasheet
Description

The Acro® 50 Last Chance Filter (LCF) Assembly is designed for the filtration of color resist at the coater, to remove contamination generated by system components, such as pumps and valves.

The Acro 50 filter's sturdy construction allows for operating pressures, up to 0.2 MPa.

Its rigid housing design prevents internal volume expansion and contraction during pump cycles, resulting in consistent dispense volumes with no passive liquid flow after the pump has stopped.

  • Reproducible and accurate output volumes with excellent pump cycle response
  • Compact size
  • All polypropylene materials
  • High efficiency filter media
  • Excellent compatibility with LCD color resist chemicals
  • Very low hold-up volume minimizes fluid loss during filter change-out
  • Fast and easy filter change-out
  • High productivity with minimal yield problems
Specifications

Materials

  • Medium: Polypropylene
  • Housing: Polypropylene

Removal Ratings

  • 6 μm, 10 μm

Filter Area

  • 19.6 cm2 / 3.04 in2

Connections: Inlet/Outlet

  • 14 in. Compression seal (Swagelok1 or compatible)

Dimensions

  • Overall Length: 46.9 mm / 1.88 in.
  • Diameter: 73.6 mm / 2.94 in.

Operating Conditions

  • Maximum Operating Temperature: 80 °C
  • Maximum Operating Pressure:
    • 0.24 MPa @ 20 °C
    • 0.17 MPa @ 80 °C

Packaging

  • 1 package: 18 pcs
1Swagelok is a Registered trademark of Swagelock Co.
Performance

Pressure Drop vs. Liquid Flow Rate

Liquid: water at 1 mPa•s (cP)

Liquid: water at 1 mPa•s (cP)

Liquid: Glycerin solution at 20 mPa•s (cP)

Liquid: Glycerin solution at 20 mPa•s (cP)

Type
Assemblies
Use
Filtration
Ordering Information
Part Number Removal Rating (μm)
6004202 6
6004203 10


Specifications and availability: The information provided in this literature was reviewed for
accuracy at the time of publication.
Product availability may be subject to change without notice.
For current information, consult your local Pall distributor or contact Pall Corporation directly.

Application
Color Filter