Emflon® Filter (Chemical Filtration) product photo Primary L

Emflon® Filter (Chemical Filtration)

The Emflon filter is recommended for chemicals which are compatible with PTFE and polypropylene.
  • Wide range of configurations
  • Five removal ratings
  • High flow rates
  • Integrity testable
  • Low extractables
  • Optimized design
  • Manufactured in a cleanroom environment
  • 100% integrity tested


* Required
Need Help?
Download Datasheet
Description
The Emflon filter is recommended for chemicals which are compatible with PTFE and polypropylene.
  • Wide range of configurations
  • Five removal ratings
  • High flow rates
  • Integrity testable
  • Low extractables
  • Optimized design
  • Manufactured in a cleanroom environment
  • 100% integrity tested
Specifications
 Materials of Construction

 
Components Materials
Filter Medium PTFE*1
Media Support Polypropylene
Inner Core Polypropylene
Outer Cage Polypropylene
End Caps Polypropylene
 
*1All fluoro-polymer components made without PFOA.
 
Filter Configurations AB1 MCY1001 MCY4463 MDY2230
 
Nominal Filter Area 0.88 m2 / 9.45 ft2 0.86 m2 / 9.26 ft2 0.31 m2 / 3.34 ft2 0.15 m2 / 1.61 ft2
Maximum Operating Temperature 194 ˚F / 90 ˚C
Maximum Forward
Differential Pressure
80 psid @ 120 ˚F / 5.5 bar @ 50 ˚C
50 psid @ 121˚ - 195 ˚F / 3.5 bar @ 51 ˚C - 90 ˚C
 
 
 
Nominal Filter Area Nominal Filter Area        
0.05 μm FDE -
0.1 μm FTE
0.2 μm FRE
0.45 μm FXE
1.0 μm FNE
 
Performance

Typical Flow Characteristics - 1cP fluid, 20℃




*2 MCY1001 is not available for FD, 0.05μm.
Type
Cartridges and Elements
Use
Filtration
Ordering Information

Part Numbers / Ordering Information

O-Ring Seal


AB [1][2][3] E [4]

Table 1

 
Code Nominal Cartridge Length Filter Area
1 258 mm / 10 in 0.88 m2 / 9.45 ft2
2 506 mm / 20 in 1.76 m2 / 18.90 ft2
3 754 mm / 30 in 2.64 m2 / 28.35 ft2
 

Table 2

 
Code Removal Ratings
FD 0.05 μm
FT 0.1 μm
FR 0.2 μm
FX 0.45 μm
FN 1.0 μm
 

Table 3

 
Code O-ring Specifications
7 AS568A-226
8 AS568A-222
3 AS568A-222
 

Table 4

 
Code O-ring Materials
H4 Silicone
HF Acid-proof Fluoroelastomer
J EPR
H11 Kalrez*3
H1 FEP Encapsulated Fluoroelastomer
 
*3 Karlez is a trademark of DuPont.

Internal O-ring


MCY4463 [5] E [6]
MDY2230 [5] E [6]

Table 5

 
Code Removal Ratings
FD 0.05 μm
FT 0.1 μm
FR 0.2 μm
FN 1.0 μm
 

Table 6

 
Code O-ring Materials
H4 Silicone
HF Acid-proof Fluoroelastomer
J EPDM
H11 Kalrez
 

Gasket seal


MCY1001 [7] E[8]

Table 7

 
Code Removal Ratings
FR 0.2 μm
FX 0.45 μm
FN 1.0 μm
 

Table 8

 
Code O-ring Materials
H13 NRB
H Fluoroelastomer
J EPDM
 
Application
Wet Etch Chemicals, Chemicals, Wet etch & cleans