G2 Kleen-Change® Assemblies with High Temperature Operation Rating product photo Primary L

G2 Kleen-Change® Assemblies with High Temperature Operation Rating

Pall Corporation’s new in-line G2 Kleen-Change can be safely operated in high temperature chemical applications such as SPM and Phosphoric acid up to 200°C.

The new in-line G2 Kleen-Change is made with an engineered ultra pure PFA resin specifically designed for higher temperature and pressure chemical application. (Please refer to the chart below that provides the temperature and pressure operating conditions.)

The filter and capsule construction are optimized for use in high temperature chemicals. The G2 Kleen-Change filter’s high flow rate makes it suitable for both point of use and recirculation bath applications.

The G2 Kleen-Change assembly is offered in four filter retention grades including 0.1μm, 30nm and the XpressKleen 12nm, 10nm1 filter. This retention range provides for prefiltration, point of use and reclaim options.

1Please visit our web site for XpressKleen G2 KC. MEXKG2EN_XpressKleen-G2.pdf


Features

  • Enhanced operating pressure rating for 200 °C
  • In-line disposable filter
  • Dimensionally compatible with the existing in-line G2 Kleen-Change assemblies.


* Required
Need Help?
Download Datasheet
Description
Pall Corporation’s new in-line G2 Kleen-Change can be safely operated in high temperature chemical applications such as SPM and Phosphoric acid up to 200°C.

The new in-line G2 Kleen-Change is made with an engineered ultra pure PFA resin specifically designed for higher temperature and pressure chemical application. (Please refer to the chart below that provides the temperature and pressure operating conditions.)

The filter and capsule construction are optimized for use in high temperature chemicals. The G2 Kleen-Change filter’s high flow rate makes it suitable for both point of use and recirculation bath applications.

The G2 Kleen-Change assembly is offered in four filter retention grades including 0.1μm, 30nm and the XpressKleen 12nm, 10nm1 filter. This retention range provides for prefiltration, point of use and reclaim options.

1Please visit our web site for XpressKleen G2 KC. MEXKG2EN_XpressKleen-G2.pdf


Features

  • Enhanced operating pressure rating for 200 °C
  • In-line disposable filter
  • Dimensionally compatible with the existing in-line G2 Kleen-Change assemblies.
Specifications
 

Materials of Construction

 
Components Materials2,3
Filter Medium Non-dewetting PTFE or PTFE
Media Support PFA / PTFE or PFA
Inner Core PFA
Outer Cage PFA
End Caps PFA
Housing PFA
Seal Heat Melt Seal
 
2 All fluoro-polymer materials made without PFOA.
3 Please refer to each product data sheet for the details.


 
Configurations In-line
Maximum Operating Temperature 200 ˚C / 392 ˚F
Maximum Operating Pressure 0.49 MPaG < 25 ˚C / 77 ˚F
0.38 MPaG < 90 ˚C / 194 ˚F
0.33 MPaG < 120 ˚C / 248 ˚F
0.29 MPaG < 150 ˚C / 302 ˚F
0.25 MPaG < 170 ˚C / 338 ˚F
0.24 MPaG < 180 ˚C / 356 ˚F
0.22 MPaG < 190 ˚C / 374 ˚F
0.21 MPaG < 200 ˚C / 392 ˚F
 

Dimensions



G2 Kleen-Change, Super Pillar4 300 P series (Nippon Pillar)

4Super Pillar is a trademark of Nippon Pillar Packing Co., Ltd.
Performance
 

Typical Flow Characteristics - 1cP fluid, 20℃



Type
Assemblies, Capsules
Use
Filtration
Ordering Information
LDFGN1 [1] 124E71HT [2]

Table 1

 
Code Removal rating Filter Area Product name5
XP10 10 nm 2.8 m2 XpressKleen G2 KC
XP12 12 nm 2.2 m2 XpressKleen G2 KC
HGP30 30 nm 1.3 m2 UltiKleen G2 HiT KC
UCFTL 0.1 μm 2.2 m2 UltiKleen G2 KC
 
5 Please visit our website for the details.
XpressKleen G2 KC ; MEXKG2EN_XpressKleen-G2.pdf
UltiKleen G2 HiT KC ; MEHITKCEN.pdf
UltiKleen G2 KC ; MEUKG2KCEN.pdf


Table 2

 
Code Prewet option Remark
none Prewet filter (packaged in DI water) For XpressKleen G2 KC
– K7 Prewet filter (packaged in DI water), low metal extractables6 For UltiKleen G2 HiT KC and UltiKleen G2 KC
 
6 Please contact Pall for the extractable conditions.
Application
Chemicals