SuporFlow® Filter product photo Primary L

SuporFlow® Filter

The SuporFlow filter is designed specifically for the filtration of ultra-high-purity chemicals up to 70 °C / 158 °F1. It combines the latest advances in polyethersulfone membranes with Pall's Ultipleat® filter technology.
  • True hydrophilic polyethersulfone membrane
  • High retention characteristics
  • Excellent compatibility
  • High flow rates
  • Low extractables
  • Instant wettability
  • 100% integrity tested and testable
  • Manufactured in a cleanroom environment
1 Not compatible with SC1 and SC2 above 35 °C.


* Required
Need Help?
Download Datasheet
Description
The SuporFlow filter is designed specifically for the filtration of ultra-high-purity chemicals up to 70 °C / 158 °F1. It combines the latest advances in polyethersulfone membranes with Pall's Ultipleat® filter technology.
  • True hydrophilic polyethersulfone membrane
  • High retention characteristics
  • Excellent compatibility
  • High flow rates
  • Low extractables
  • Instant wettability
  • 100% integrity tested and testable
  • Manufactured in a cleanroom environment
1 Not compatible with SC1 and SC2 above 35 °C.
Specifications

Materials

  • Medium: Polyethersulfone (PES)
  • Core, cage, and end caps: High density polyethylene (HDPE)
  • Support and drainage: High density polyethylene (HDPE)
  • O-ring options: Viton2 and Teflon2 encapsulated Viton

Removal Rating

  • Monorated3 @ 0.1 μm

Filter Areas

  • 254 mm / 10 in.: 1.86 m2 / 20 ft2

Configurations

  • Nominal length: 254 mm / 10 in.
  • Diameter: 70 mm / 2.75 in.
  • Code 3: 222 double O-ring / flat end
  • Code 8: 222 double O-ring / finned end

Operating Conditions

  • Maximum temperature: 70 °C / 158 °F
  • Maximum forward / reverse differential pressure: 0.103 MPa @ 70 °C / 15 psid @ 158 °F

Integrity Test Values4

  • 0.1 μm, 10 in. segment, 0.14 MPa (20 psig), < 40 cm3 / min

Recommended Applications

  • Aqueous based chemicals
  • Bulk chemical distribution systems
  • Point-of-use applications
1 Not compatible with SC1 and SC2 above 35 °C.
2 Teflon and Viton are registered trademarks of E. I. du Pont de Nemours and Company.
3 Monoratings are based upon monodisperse polystyrene latex bead challenges in 18.2 Megohm-cm ultrapure DI water.
4 Test fluid used is 60:40, IPA: H2O.
Performance

Pressure Drop vs. Liquid Flow Rate5

Pressure Drop vs. Liquid Flow Rate
5 For liquids with a viscosity differing from water, multiply the pressure drop by the viscosity in centipoise.
Type
Filter Cartridges
Ordering Information
Part Number6 Removal Rating (μm) Nominal Length (mm / in.) Configuration Code O-Ring Material7
ABD1UET3EH1 0.1 254 / 10 3 Teflon encapsulated Viton
ABD1UET8EH1 0.1 254 / 10 8 Teflon encapsulated Viton
MRD1UET3EH1 0.1 254 / 10 3 Teflon encapsulated Viton
6 The above filter configurations are also available in 508 mm / 20 in., 762 mm / 30 in., and 1016 mm / 40 in. lengths. These can be ordered by changing the fourth digit in the part number to a 2, 3, or 4 respectively.
7 Other O-ring materials are available.


Unit conversion: 1 MPa = 10 bar
Application
Chemicals