UltiKleen™ G2 Filter product photo Primary L

UltiKleen™ G2 Filter

The UltiKleen G2 filter is an advanced all fluoro-polymer cartridge designed specifically for use in critical chemical filtration. The filter uses a pure unmodified PTFE membrane with guaranteed levels of metal ion extractable and particle cleanliness.

The patented Ultipleat® filter design maximizes filter area to provide high flow capacity in a compact filter size. The large filter area ensures long service life.

Features & Benefits


  • All fluoro-polymer construction
    • Suitable for aggressive high temperature chemicals
  • Optimized Ultipleat construction
    • Increased flow and long life improves COO
  • Low extractables
    • Maintains chemical purity and can shorten qualification time
  • Pre-wet option
    • Eliminates need for pre-wetting for safer and faster changes
  • 100 % integrity tested
    • Assures product performance for every filter
  • Multiple removal ratings and lengths
    • Provides options for different flow rate and particle removal needs


* Required
Need Help?
Download Datasheet
Description
The UltiKleen G2 filter is an advanced all fluoro-polymer cartridge designed specifically for use in critical chemical filtration. The filter uses a pure unmodified PTFE membrane with guaranteed levels of metal ion extractable and particle cleanliness.

The patented Ultipleat® filter design maximizes filter area to provide high flow capacity in a compact filter size. The large filter area ensures long service life.

Features & Benefits


  • All fluoro-polymer construction
    • Suitable for aggressive high temperature chemicals
  • Optimized Ultipleat construction
    • Increased flow and long life improves COO
  • Low extractables
    • Maintains chemical purity and can shorten qualification time
  • Pre-wet option
    • Eliminates need for pre-wetting for safer and faster changes
  • 100 % integrity tested
    • Assures product performance for every filter
  • Multiple removal ratings and lengths
    • Provides options for different flow rate and particle removal needs
Specifications

Materials of Construction1

 
Components Materials
Filter Medium PTFE
Media Support PTFE
Core PFA
Cage PFA
End Caps PFA
Sealing methods Heat Melt Seal
O-ring FEP encapsulated fluoroelastomer
 

1All Fluoropolymer materials made without PFOA.

Removal Ratings and Operating Conditions

 
Removal Ratings 0.2 μm, 0.1 μm, 0.05 μm
Configurations AB1 AB2 AB3
Filter Areas 2.2 m2 / 23.7 ft2 4.4 m2 / 47.4 ft2 6.6 m2 / 71.0 ft2
Nominal Length 254 mm / 10 in 508 mm / 20 in 762 mm / 30 in
Maximum Operating Temperature 170 °C / 338 °F
Maximum Forward Differential Pressure 0.59 MPa < 50 °C / 86 psid < 122 °F
 


Dimensions

Performance

Typical Flow Characteristics - 1cP fluid, 20℃

Type
Cartridges and Elements
Use
Filtration
Ordering Information

ABFG [1] UFK [2] L3EH1 [3]


Table 1

 
Code Cartridge Length
Nominal L
1 10 244 mm / 9.6 in
2 20 487 mm / 19.2 in
3 30 726 mm / 28.6 in
 

Table 2

 
Code Removal Ratings
D 0.05 μm
T 0.1 μm
R 0.2 μm
 

Table 3

 
Code Prewet Option
-K3 Prewet filter (packaged in DI water)
-K7 Prewet filter (packaged in DI water), Low metal extractables 3
 


2Please contact Pall on the extractable onditions.
3Part numbers in conbination with all codes are not always availbale. Please contact Pall for the part number availability.
Application
Chemicals
Segment
Semiconductor