Documents
Datasheets
Download:Description
The Pall UltiKleen STP filter is specifically engineered for filtering organic stripper. In the organic stripping process, a variety of sizes and types of gels and particles are generated as a result of the various ashing processes. The ashing can change the gels to a distribution of fine particles. These fine particles can quickly clog conventional design high surface area membrane filters.
The UltiKleen STP filter is the latest advance in Pall Corporation’s stripper filtration offerings. It uses a combination of carefully controlled submicron filter media. The filter is further optimized with gel-capturing, depth matrix media to effectively filter organic stripper. The proprietary media layering construction maintains high flows while removing unwanted particles and gels.
- Excellent gel retention
- High flow rates
- Low extractables (< 25 ppb in a 5 % HCl extraction of 1.5 L for 24 hours)
- Downstream vent option with G2 KC assembly
- Multilayer filter media design
- All fluoro-polymer construction
- 100% integrity tested
- Long service life
Specifications
Materials of Construction
Components | Materials |
Filter Medium | PTFE |
Media Support | PFA |
Inner Core / Outer Cage | PFA |
End Caps | PFA |
O-ring (for cartridge) | FEP Encapsulated fluoroelastomer |
Housing (for KC type) | PFA |
Removal Ratings and Operating Conditions
Removal Ratings | 0.05 μm, 0.1 μm, 0.2 μm | |
Configurations | Cartridge | 102 mm / 4 inch, 254 mm / 10 inch |
KC (Kleen-Change®) | T flow, In-line | |
Nominal Filter Area | 4 inch | 0.5 m2 / 5.4 ft2 |
10 inch | 1.2 m2 / 12.9 ft2 | |
Maximum Operating Temperature | 170 °C / 338 °F | |
Maximum Forward Differential Pressure (Cartridge) | 0.6 MPaG @ 50 °C / 87 psig @ 122 °F | |
Maximum Operating Pressure (KC Assemblies) |
0.49 MPaG < 25 °C / 71 psig < 77 °F 0.39 MPaG < 60 °C / 57 psig < 140 °F 0.34 MPaG < 90 °C / 49 psig < 194 °F 0.20 MPaG < 120 °C / 29 psig < 248 °F 0.15 MPaG < 150 °C / 22 psig < 302 °F 0.12 MPaG < 170 °C / 17 psig < 338 °F |
|
Performance
UltiKleenTM STP Filter
Pressure Drop vs. Liquid flow Rate (Water, 20°C)1
![](/INTERSHOP/static/WFS/PALL-PALLUS-Site/-/PALL/en_US/images/Microelectronics/UltiKleen_STP_img1.jpg)
![](/INTERSHOP/static/WFS/PALL-PALLUS-Site/-/PALL/en_US/images/Microelectronics/UltiKleen_STP_img2.jpg)
UltiKleenTM STP KC Assemblies
Pressure Drop vs. Liquid flow Rate (Water, 20°C)1
*1 Typical flow rates.
For liquids other than water, multiply the differential pressure by fluid viscosity in centipoise. Unit conversion: 1 bar = 0.1 MPa
Type
Additional Information
Dimensions
UltiKleenTM STP Filter
![](/INTERSHOP/static/WFS/PALL-PALLUS-Site/-/PALL/en_US/images/Microelectronics/UltiKleen_STP_img3.jpg)
UltiKleenTM STP KC Assemblies
Symbols | Nominal length (mm / in) |
L1 | 416 mm / 16.4 in |
L2 | 281 mm / 11.1 in |
L3 | 430 mm / 16.9 in |
L4 | 282 mm / 11.1 in |
L5 | 180 mm / 7.1 in |
L6 | 106 mm / 4.2 in |
Ordering Information
UltiKleenTM STP Filter
ABF [1] STQ [2] 3E[3] [4]
Table 1
Nominal Length | ||
Code | Inch | L (mm) |
04 | 4 | 111 |
1 | 10 | 265 |
Table 2
Code | Column2 |
D | 0.05 μm |
T | 0.1 μm |
R | 0.2 μm |
Table 3
Code | O-ring options |
H1 | FEP encapsulated fluoroelastomer |
H38 | Perfrez *1PXC-Ultra |
*1 Perfrez is a trademark of Applied Seals North Americas
Table 4
Code | Prewet Option |
-K3 | Prewet filter (packaged in DI water) |
-K7 | Prewet filter (packaged in DI water), Low metal extractables *2 |
UltiKleenTM STP KC Assemblies
LDF [1] [2] STQ [3] [4] E [5] [6]
Table 1
Code | Flow |
T | T flow |
N | In-line |
Table 2
Code | Cartridge Length |
05 | 4 inch |
1 | 10 inch |
Table 3
Code | Removal Ratings |
D | 0.05 μm |
T | 0.1 μm |
R | 0.2 μm |
Table 4
Vent/Drain | ||||
Code | Inlet/Outlet | Head end | Bowl end | Memo |
6 | 3⁄8 in male | 1⁄4 in male | 1⁄4 in male | In-line (5 in only) |
8 | 1⁄2 in male | 1⁄4 in male | 1⁄4 in male | In-line |
9 | 1⁄2 in female | 1⁄2 in male | 1⁄2 in female | In-line |
12 | 3⁄4 in male | 1⁄2 in male | 1⁄2 in male | T flow |
12 | 3⁄4 in male | 1⁄4 in male | 1⁄4 in male | In-line |
13 | 3⁄4 in male | 1⁄2 in male | 1⁄2 in male | T flow / In-line |
Table 5
Code | Connections |
0 | Non-connection |
1 | 20 series (Flowell) |
2 | Super Pillar Type (Nippon Pillar)*3 |
51 | Flare style |
6 | FinalLock*4 |
71 | Super Pillar 300 P series (Nippon Pillar) |
72 | Super Pillar 300 P series L type (Nippon Pillar) |
8 | 60 series (Flowell) |
9 | 11CR series (Flowell) |
Table 6
Code | Prewet Option |
-K3 | Prewet filter (packaged in DI water) |
-K7 | Prewet filter (packaged in DI water), Low metal extractables*5 |
*3 Pillar is a trademark of Nippon Pillar Packing Co.
*4 FinalLock is a trademark of Kurabo Industries Ltd.
*5 Please contact Pall on the extractable conditions.
*6 Part numbers in conbination with all codes are not always availbale.
Please contact Pall for the part number availability.
Reviews
We appreciate your review of this product. Please login to your account to leave a review.