UltiKleen™ Filters and KC Assemblies

Materials of construction¹

Components	Materials
Filter Medium	PTFE
Media Support	PTFE/PFA
Inner Core / Outer Cage	PFA
End Caps	PFA
Sealing methods	Melt seal
O-ring (for cartridge)	FEP Encapsulated fluoroelastomer
Housing (for KC type)	PFA

¹All fluoro-polymer components made without PFOA.

Removal Ratings	FD	FT	FR	FX
	0.05 μm	0.1 μm	0.2 μm	0.45 μm
Configurations (KC Assemblies)	T-Flow, In-line
Configurations (Cartridge Filters)	ABF04	AB1	AB2	AB3
Nominal Filter Areas	0.48 m2 / 5.17 ft2	1.2 m2 / 13 ft2	2.4 m2 / 26 ft2	3.6 m2 / 39 ft2
Nominal Length	102 mm / 4 in	254 mm / 10 in	508 mm / 20 in	762 mm / 30 in
Maximum Operating Temperature	170 ˚C / 338 ˚F
Maximum Forward Differential Pressure	0.59 MPa < 50 ˚C / 85 psid < 120 ˚F
Maximum Operating Pressure	0.49 MPaG ( < 25 ˚C / 77 ˚F) 0.39 MPaG ( < 60 ˚C / 140 ˚F ) 0.34 MPaG ( < 90 ˚C / 194 ˚F ) 0.20 MPaG ( < 120 ˚C / 248 ˚F ) 0.15 MPaG ( < 150 ˚C / 302 ˚F) 0.12 MPaG ( < 170 ˚C / 338 ˚F )

UltiKleen™ Filters

Typical Flow Characteristics - 1cP fluid, 20 ºC

Filter Capsules

Operating Recommendations

• Available prewet as an option
• Proper wetting procedures should be followed if prewet option is not selected. IPA or other low surface
  tension wetting liquids need to be completely flushed prior to chemical contact.
• Must allow for proper venting

Dimensions

Part Numbers / Ordering Information2

ABF [1] UCF [2] 3EH1 [3]
MRF [1] UCF [2] 25EH1 [3]

Table 1

Code	Cartridge Length
	Nominal	AB type	MR type
04	4 in	130 mm / 5.1 in	-
1	10 in	284 mm / 11.2 in	262 mm / 10.3 in
2	20 in	544 mm / 21.4 in	503 mm / 19.8 in
3	30 in	794 mm / 31.3 in	-

Table 2

Code	Removal Ratings
D	0.05 μm
T	0.1 μm
R	0.2 μm
X	0.45 μm

Table 3

Code	Prewet Option
blank	Without Prewet
-K3	Prewet filter ( packaged in DI water)
-K7	Prewet filter ( packaged in DI water), Low metal extractables3

² Part numbers in conbination with all codes are not always availbale. Please contact Pall for the part number availability.
³ Please contact Pall on the extractable conditions.

UltiKleen^TM KC Assemblies

Typical Flow Characteristics - 1cP fluid, 20℃

Dimensions by Configurations

Nominal Length

Length	Tube size 3/4 in (Code 13)	Tube size 1/2 in (Code 09)
L1	416	-
L2	281	-
L2	430	420
L4	292	282
L5	180	-
L6	105	106

UltiKleen^TM KC Assemblies

Part Numbers / Ordering Information⁴

LDF [1] [2] UCF [3] [4] E [5] [6]

Table 1

Code	Flow
T	T-Flow
N	In-Line

Table 2

Code	Cartridge Size
1	10 in
05	5 in

Table 3

Code	Removal Ratings
D	0.05 μm
T	0.1 μm
R	0.2 μm
X	0.45 μm

Table 4

Code	Tube Size
095	1/2 in female
13	3/4 in female

Table 4

Code	Connection Size
066	3/8 in male
086	1/2 in male
127	3/4 in male
648	3/8 in male

Table 5

Code	Connections
1	20 series (Flowell)
2	Super Pillar Type (Nippon Pillar)
51	Flare style
69	FinalLock
71	Super Pillar 300 P series (Nippon Pillar)
72	Super Pillar 300 P series L type (Nippon Pillar)
8	60 series (Flowell)

Table 6

Code	Prewet Option
blank	Without Prewet
-K3	Prewet filter (packaged in DI water)
-K7	Prewet filter (packaged in DI water), Low metal extractables10

⁴ Disposable capsules are not available with every option. Please contact Pall for the part number availability.
⁵ Only for In-line type.
⁶ Only for flare style of In-line type.
⁷ Only for flare style. ⁸ Only for Super Pillar 300 series.
⁹ Only for T-flow type.
¹⁰ Contact your local Pall representative for information about extractables.