1. Home/
  2. Microelectronics/
  3. Semiconductor/
  4. Chemicals/
  5. UltiKleen™ SPM KC Assemblies UltiKleen™ G2 SPM KC Assemblies
UltiKleen™ SPM KC Assemblies UltiKleen™ G2 SPM KC Assemblies product photo Primary L

UltiKleen™ SPM KC Assemblies UltiKleen™ G2 SPM KC Assemblies

The Pall UltiKleen SPM KC and UltiKleen G2 SPM KC assemblies are completely disposable filter units containing all fluoro-polymer cartridges. They are specifically designed and ideally suited for high-temperature process chemicals, particularly sulfuric acid/hydrogen peroxide mixtures (SPM). The unique downstream venting-type assemblies allow gas to exhaust from chemical fluids efficiently and provide higher particle cleanliness levels.

UltiKleen SPM KC assemblies are available for both standard diameter (68 mm / 2.67 in.) cartridges and higher-flow-rate G2 cartridges (83 mm / 3.27 in. diameter).
  • Proprietary media construction with high resistance to shear forces in high-temperature, viscous chemical filtration
  • Downstream venting availbale in G2-type assembly
  • Acid-cleaned filter cartridge for significantly low metals contribution to process chemicals
  • Disposable filter unit with filter cartridge integrally sealed in housing
  • Sealed assembly for safer handling, faster change-out and less downtime
  • 100% integrity tested
Read More


Contact Us
* Required

Datasheets

Download: English | Japanese
The Pall UltiKleen SPM KC and UltiKleen G2 SPM KC assemblies are completely disposable filter units containing all fluoro-polymer cartridges. They are specifically designed and ideally suited for high-temperature process chemicals, particularly sulfuric acid/hydrogen peroxide mixtures (SPM). The unique downstream venting-type assemblies allow gas to exhaust from chemical fluids efficiently and provide higher particle cleanliness levels.

UltiKleen SPM KC assemblies are available for both standard diameter (68 mm / 2.67 in.) cartridges and higher-flow-rate G2 cartridges (83 mm / 3.27 in. diameter).
  • Proprietary media construction with high resistance to shear forces in high-temperature, viscous chemical filtration
  • Downstream venting availbale in G2-type assembly
  • Acid-cleaned filter cartridge for significantly low metals contribution to process chemicals
  • Disposable filter unit with filter cartridge integrally sealed in housing
  • Sealed assembly for safer handling, faster change-out and less downtime
  • 100% integrity tested

Materials of Construction

Filter medium: PTFE
Media support: PFA
Inner core: PFA
Outer cage: PFA
End caps: PFA
Housing: PFA

Product Name UltiKleen SPM KC Assemblies UltiKleen G2 SPM KC Assemblies
Removal Ratings 0.1μm, 0.2 μm 0.1μm, 0.2 μm, 0.05 μm (available with downstream venting-type only)
Configurations T- flow, In-line (10 in.) T-flow T-flow, In-line, L-flow (10 in.)
Filter Area 1.2 m2 / 13 ft2 1.7 m2 / 18.9 ft2
Maximum Operating Temperature 170 ºC / 338 ºF 170 ºC / 338 ºF
Maximum Operating Pressure 0.49 MPaG (71 psig) @ 25 ºC (77 ºF)
0.39 MPaG (56.6 psig) @ 60 ºC (140 ºF)
0.34 MPaG (49.3 psig) @ 90 ºC (194 ºF)
0.20 MPaG (29.0 psig) @ 120 ºC (248 ºF)
0.15 MPaG (21.8 psig) @ 150 ºC (302 ºF)
0.12 MPaG (17.4 psig) @ 170 ºC (338 ºF)		 0.49 MPaG (71 psig) @ 25 ºC (77 ºF)
0.39 MPaG (56.6 psig) @ 60 ºC (140 ºF)
0.34 MPaG (49.3 psig) @ 90 ºC (194 ºF)
0.20 MPaG (29.0 psig) @ 120 ºC (248 ºF)
0.15 MPaG (21.8 psig) @ 150 ºC (302 ºF)
0.12 MPaG (17.4 psig) @ 170 ºC (338 ºF)


Kleen-Change Assembly (LDF)

In-Line Nominal Length
(L) (mm / in.)		 T-style Nominal Length
(L) (mm / in)		 TR-style Nominal Length
(L) (mm / in.)
09-12E51 356 / 14.02 13E0 416 / 16.38 13E1 382 / 15.0
    13E1 382 / 15 13E2 369 / 14.5
12E51 387 / 15.23 13E2 369 / 14.5 13E51 384 / 15.1
13E1 468 / 17.3 13E6 396.5 / 15.6 13E71 369 / 14.5
13E51 475 / 18.7 13E51 369 / 14.5    
13E71 440 / 17.3 13E71 370 / 14.6    


G2 Kleen-Change Assembly (LDFG)

In-Line Nominal Length
(L) (mm / in.)		 T-style Nominal Length
(L) (mm / in.)		 VT-style Nominal Length
(L) (mm / in.)
12E2 396.5 / 15.6 12E2 408/ 16.1 12E2 377 / 14.8
12E51 412 / 16.2 12E71 403 / 15.9 128E2 385 / 15.2
124E51 412 / 16.2 13E0 495 / 19.5 12E71/72 377 / 14.8
16E8 428 / 16.9 13E1 432 / 17 128E71/72 402 / 15.8
16E51 436 / 17.2 13E2 442 / 17.4 13E1 445 / 17.5
17E0 448 / 17.6 13E6 416 / 16.4 13E51 444 / 17.4
17E1 445 / 17.7 13E9 433 / 17.1 168E71/72 403 / 15.9
17E51 442 / 17.4 13E51 473 / 18.6    
17E71 462 / 18.2 13E71 444 / 17.5    
    L-style VL-style
    12E2 408 / 16.1 12E2 440 / 17.35

Pressure Drop vs. Liquid Flow Rate1

LDFT1 (3⁄4 in. nozzle)

LDFT1 (3⁄4 in. nozzle)

LDFGN1 (3⁄4 in. nozzle)

LDFGN1 (3⁄4 in nozzle)

LDFVT1, LDFVL1 (3⁄4 in. nozzle)

LDFVT1, LDFVL1 (3⁄4 in nozzle)
1 For liquids other than water, multiply differential pressure by fluid viscosity (cP).

Unit conversion: 1 bar = 0.1 MPa
Filter Capsules

Dimensions

UltiKleen SPM KC Assemblies

T-Flow In-Line
T-Flow In-Line


UltiKleen G2 SPM KC Assemblies

In-Line L-Flow
In-Line L-Flow
T-Flow T-Flow Downstream Vent
T-Flow T-Flow Downstream Vent

Ordering Information - UltiKleen SPM KC Assemblies2

Pall Part Number = LDF [1] 1 SPM [2] [3] E [4] [5]

Table 1

Code Flow
T T-flow
N In-line

Table 2

Code Removal ratings (μm)
T 0.1
R 0.2

Table 3

Code Inlet/outlet Vent/drain Memo
Head end Bowl end
12 3⁄4 in. male 1⁄2 in. male 1⁄2 in. male T-flow
12 3⁄4 in. male 1⁄4 in. male 1⁄4 in. male In-line
13 3⁄4 in. female 1⁄2 in. female 1⁄2 in. female T-flow / In-line

Table 4

Code Connections
0 No connection
1 20 Series (Flowell)
2 Super Pillar Type (Nippon Pillar)3
51 Flare style
6 FinalLock4
71 Super Pillar 300 P Series (Nippon Pillar)
72 Super Pillar 300 P Series L Type (Nippon Pillar)
8 60 Series (Flowell)
9 11CR Series (Flowell)

Table 5

Code Prewet option
-K3 Prewet filter (packaged in DI water)
-K7 Prewet filter (packaged in DI water), low metal extractables5
2 Part numbers in combination with all codes are not always available. Please contact Pall for the part number availability.
3 Pillar is a trademark of Nippon Pillar Packing Co.
4 FinalLock is a trademark of Kurabo Industries Ltd.
5 Please contact Pall on the extractable conditions.


Ordering Information - UltiKleen G2 SPM KC Assemblies6

Pall Part Number = LDF[1] [2] 1 SPM [3] [4] E [5] [6]

Table 1

Code Downstream venting
G N/A
V Available

Table 2

Code Flow
T T-flow
N In-line
L L-flow

Table 3

Code Removal ratings (μm)
D 0.05 (available with downstream venting-type only)
T 0.1
R 0.2

Table 4

Code Inlet/outlet Vent/drain Memo
Head end Bowl end
12 3⁄4 in. male 1⁄2 in. male 1⁄2 in. male T-flow / L-flow
12 3⁄4 in. male 1⁄2 in. male 1⁄2 in. female Downstream venting-type
12 3⁄4 in. male 3⁄8 in. male 3⁄8 in. male In-line
124 3⁄4 in. male 1⁄4 in. male 1⁄4 in. male In-line
128 3⁄4 in. male 1⁄2 in. male 1⁄2 in. male Downstream venting-type
13 3⁄4 in. female 1⁄2 in. female 1⁄2 in. female T-flow
16 1 in. male 1⁄2 in. male 1⁄2 in. male T-flow
16 1 in. male 1⁄2 in. male 1⁄2 in. female Downstream venting-type
16 1 in. male 3⁄8 in. male 3⁄8 in. male In-line
164 1 in. male 1⁄4 in. male 1⁄4 in. male In-line
168 1 in. male 1⁄2 in. male 1⁄2 in. male Downstream venting-type
17 1 in. female 1⁄2 in. female 1⁄2 in. female In-line

Table 5

Code Connections
0 No connection
1 20 Series (Flowell)
2 Super Pillar Type (Nippon Pillar)7
51 Flare style
71 Super Pillar 300 P Series (Nippon Pillar)
72 Super Pillar 300 P Series L Type (Nippon Pillar)
8 60 Series (Flowell)
9 11CR Series (Flowell)

Table 6

Code Prewet option
-K3 Prewet filter (packaged in DI water)
-K7 Prewet filter (packaged in DI water), low metal extractables8
6 Part numbers in combination with all codes are not always available. Please contact Pall for the part number availability.
7 Pillar is a trademark of Nippon Pillar Packing Co.
8 Please contact Pall on the extractable conditions.

We appreciate your review of this product. Please login to your account to leave a review.