Datasheets
Download:The UltiKleen HiT KC Assembly is specially constructed with proprietary fluid flow path improvements, for reliable high particle removal efficiency in severe chemical service conditions, found in high temperature SPM applications.
Designed for critical single pass point-of-use retention requirements, the UltiKleen HiT KC Assembly provides a high flow rate that makes it suitable for recirculation bath applications as well.
The improved non-dewetting property help enable semiconductor makers to meet the critical chemical process filtration requirements beyond 32 nm manufacturing. Pall’s advanced ultra low extractables, Me-KleenSM K7 post treatment process is also available to reduce metal ion extractables to a low single digit ppb total.
The UltiKleen G3 KC T-flow assembly has a slightly larger diameter than the UltiKleen G2 KC T-flow assembly, but it has the same face-to-face sealing distance.1 This makes interchanging assemblies easy. The increased diameter of the G3 assembly contains a larger format UltiKleen Excellar ER filter with increased filter area and robust supports for higher flow rates and longer service life.
Designed for critical single pass point-of-use retention requirements, the UltiKleen HiT KC Assembly provides a high flow rate that makes it suitable for recirculation bath applications as well.
The improved non-dewetting property help enable semiconductor makers to meet the critical chemical process filtration requirements beyond 32 nm manufacturing. Pall’s advanced ultra low extractables, Me-KleenSM K7 post treatment process is also available to reduce metal ion extractables to a low single digit ppb total.
The UltiKleen G3 KC T-flow assembly has a slightly larger diameter than the UltiKleen G2 KC T-flow assembly, but it has the same face-to-face sealing distance.1 This makes interchanging assemblies easy. The increased diameter of the G3 assembly contains a larger format UltiKleen Excellar ER filter with increased filter area and robust supports for higher flow rates and longer service life.
- Enhanced retention of particles in high temperature
- Greater than 95% retention of 15 nm gold colloids
- Large nominal filter area of 2.6 m2/28 ft2
- High flow rates
- All ultra high purity fluoro-polymer construction
- Low extractables (Me-Kleen K7 option is available)
- 100% prewetted with ultrapure water in package
- Downstream core vent reduces potential for bubble collection and premature blockage
Materials of Construction
| Components | Materials |
| Filter Medium | Surface modified PTFE |
| Media Support | PFA / PTFE |
| Inner Core | PFA |
| Outer Cage | PFA |
| End Caps | PFA |
| Housing | PFA |
| Product Name | UltiKleen G3 HiT KC Assemblies | UltiKleen G2 HiT KC Assemblies | ||
| Removal Ratings | 30 nm | 15 nm | 30 nm | 15 nm |
| Nominal Filter Area | 2.1 m2 / 23 ft2 | 2.6 m2 / 28 ft2 | 1.3 m2 / 14 ft2 | 1.7 m2 / 18 ft2 |
| Configurations | T-flow, In-line | T-flow, In-line, L-flow | ||
| Maximum Operating Temperature | 180 ºC / 356 ºF | |||
| Maximum Operating Pressure | 0.5 MPaG (72.5 psig) @ 25 ºC (77 ºF) 0.4 MPaG (58.0 psig) @ 60 ºC (140 ºF) 0.35 MPaG (50.7 psig) @ 90 ºC (194 ºF) 0.20 MPaG (29.0 psig) @ 120 ºC (248 ºF) 0.15 MPaG (21.8 psig) @ 150 ºC (302 ºF) 0.12 MPaG (17.4 psig) @ 180 ºC (356 ºF) | |||
UltiKleen G3 HiT KC Assemblies
Dimensions (nominal)
UltiKleen G2 HiT KC Assemblies
Dimensions (nominal)
G2 Kleen-Change Assembly (LDFG/LDFV)
| In-Line | Nominal Length (L) (mm / in.) | T-style | Nominal Length (L) (mm / in.) | VT-style | Nominal Length (L) (mm / in.) |
| 12E2 | 396.5 / 15.6 | 12E2 | 408/ 16.1 | 12E2 | 377 / 14.8 |
| 12E51 | 412 / 16.2 | 12E71 | 403 / 15.9 | 128E2 | 385 / 15.2 |
| 124E51 | 412 / 16.2 | 13E0 | 495 / 19.5 | 12E71/72 | 377 / 14.8 |
| 16E8 | 428 / 16.9 | 13E1 | 432 / 17 | 128E71/72 | 402 / 15.8 |
| 16E51 | 436 / 17.2 | 13E2 | 442 / 17.4 | 13E1 | 445 / 17.5 |
| 17E0 | 448 / 17.6 | 13E6 | 416 / 16.4 | 13E51 | 444 / 17.4 |
| 17E1 | 445 / 17.7 | 13E9 | 433 / 17.1 | 168E71/72 | 403 / 15.9 |
| 17E51 | 442 / 17.4 | 13E51 | 473 / 18.6 | ||
| 17E71 | 462 / 18.2 | 13E71 | 444 / 17.5 | ||
| L-style | VL-style | ||||
| 12E2 | 408 / 16.1 | 12E2 | 440 / 17.35 | ||
3 Pillar is a trademark of Nippon Pillar Packing Co.
Pressure Drop vs. Liquid Flow Rate2
UltiKleen G3 HiT KC Assemblies
1 inch T-flow, In-line
3⁄4 inch T-flow, In-line
UltiKleen G2 HiT KC Assemblies
1 inch T-flow, In-line
3⁄4 inch T-flow, In-line, L-flow
2 For liquids other than water, multiply differential pressure by fluid viscosity (cP). Unit conversion: 1 bar = 0.1 MPa
Filter Capsules
Ordering Information - UltiKleen G3 HiT KC Assemblies
Part Number = LDFH [1] 1HGP [2] [3] E [4] [5]Table 1
| Code | Flow |
| T | T-flow |
| N | In-line |
Table 2
| Code | Removal ratings |
| 15 | 15 nm |
| 30 | 30 nm |
Table 34
| Code | Inlet/outlet | Vent/drain | Memo | |
| Head end | Bowl end | |||
| 12 | 3⁄4 in. male | 1⁄2 in. male | 1⁄2 in. female | T-flow |
| 128 | 3⁄4 in. male | 1⁄2 in. male | 1⁄2 in. male | T-flow |
| 16 | 1 in. male | 1⁄2 in. male | 1⁄2 in. female | T-flow |
| 164 | 1 in. male | 1⁄4 in. male | 1⁄4 in. male | In-line |
| 168 | 1 in. male | 1⁄2 in. male | 1⁄2 in. male | T-flow |
Table 4
| Code | Connections |
| 2 | Super Pillar Type (Nippon Pillar) |
| 51 | Flare style |
| 71 | Super Pillar 300 P Series (Nippon Pillar) |
| 72 | Super Pillar 300 P Series L Type (Nippon Pillar) |
Table 5
| Code | Prewet option |
| -K3 | Prewet filter (packaged in DI water) |
| -K7 | Prewet filter (packaged in DI water), low metal extractables5 |
Ordering Information - UltiKleen G2 HiT KC Assemblies
Part Number = LDF [1] 1HGP [2] [3] E [4] [5]Table 1
| Code | Flow |
| VT | T-flow |
| GN | In-line |
| VL | L-flow |
Table 2
| Code | Removal ratings |
| 15 | 15 nm |
| 30 | 30 nm |
Table 34
| Code | Inlet/outlet | Vent/drain | Memo | |
| Head end | Bowl end | |||
| 12 | 3⁄4 in. male | 1⁄2 in. male | 1⁄2 in. female | T-flow / L-flow |
| 12 | 3⁄4 in. male | 3⁄8 in. male | 3⁄8 in. male | In-line |
| 124 | 3⁄4 in. male | 1⁄4 in. male | 1⁄4 in. male | In-line |
| 128 | 3⁄4 in. male | 1⁄2 in. male | 1⁄2 in. male | T-flow |
| 13 | 3⁄4 in. female | 1⁄2 in. female | 1⁄2 in. female | T-flow |
| 16 | 1 in. male | 1⁄2 in. male | 1⁄2 in. female | T-flow |
| 16 | 1 in. male | 3⁄8 in. male | 3⁄8 in. male | In-line |
| 164 | 1 in. male | 1⁄4 in. male | 1⁄4 in. male | In-line |
| 168 | 1 in. male | 1⁄2 in. male | 1⁄2 in. male | T-flow |
| 17 | 1 in. female | 1⁄2 in. female | 1⁄2 in. female | In-line |
Table 4
| Code | Connections |
| 0 | No connection |
| 1 | 20 Series (Flowell) |
| 2 | Super Pillar Type (Nippon Pillar) |
| 51 | Flare style |
| 6 | Final Lock (Krabo) |
| 71 | Super Pillar 300 P Series (Nippon Pillar) |
| 72 | Super Pillar 300 P Series L Type (Nippon Pillar) |
| 9 | 11CR Series (Flowell) |
Table 5
| Code | Prewet option |
| -K3 | Prewet filter (packaged in DI water) |
| -K7 | Prewet filter (packaged in DI water), low metal extractables5 |
4 Disposable capsules are not available with every option. Please contact Pall for part number availability.
5 Please contact Pall for the extractable conditions.
We appreciate your review of this product. Please login to your account to leave a review.
