1. Home/
  2. Microelectronics/
  3. Semiconductor/
  4. Chemicals/
  5. JD Series Filter Housings
JD Series Filter Housings product photo Primary L

JD Series Filter Housings

Polypropylene Single Cartridge Housing

  • Constructed from polypropylene with no fillers, colorants or lubricants
  • Economical alternative to fluoropolymer, stainless steel or other high purity vessels
  • Housing designed to accept SOE filter cartridges with 222 O-ring sealing
  • Excellent chemical compatibility for use with semiconductor grade chemicals, CMP slurry, magnetic coatings, electronic etching solutions, DI and reagent grade water
  • Accommodates standard 50.8 cm (20 in) Pall M3 (Code 3) style filter cartridges
Read More


Contact Us
* Required

Datasheets

Download: English

Polypropylene Single Cartridge Housing

  • Constructed from polypropylene with no fillers, colorants or lubricants
  • Economical alternative to fluoropolymer, stainless steel or other high purity vessels
  • Housing designed to accept SOE filter cartridges with 222 O-ring sealing
  • Excellent chemical compatibility for use with semiconductor grade chemicals, CMP slurry, magnetic coatings, electronic etching solutions, DI and reagent grade water
  • Accommodates standard 50.8 cm (20 in) Pall M3 (Code 3) style filter cartridges

Materials of Construction

Head and Bowl Polypropylene – no fillers, colorants or lubricants
Shell O-rings Fluoroelastomer (standard), nitrile, silicone elastomer
Replacement Cap Plug Kit For vents / drains – includes one plug and one O-ring (Part # T11039030)

Connections Inlet / Outlet 3/4ʺ FNPT
Vent / Gauge 1/4ʺ FNPT
Drain 1/4ʺ FNPT
Maximum Operating Pressure1 0.69 MPa @ 38 °C / 100 psig @ 100 °F

1 Maximum operating pressure ratings are vessel ratings only.
Safe operating temperature and pressure will depend on filter cartridge and gasket/O-ring used.
For inquiries on compatibility, contact the factory or your Pall distributor.

This housing is not recommended for compressed air or gas service. It is suitable for use with fully compatible* liquids only.
This housing is not recommended for acid service at the pressure shown. Please contact Pall for detailed compatibility information.

* which do not soften, swell or adversely affect the product or its materials of construction

NOTE : Use of this product in a manner other than in accordance with Pall’s current recommendations may lead to injury or loss.
Pall cannot accept liability for such injury or loss.

Dimensions (nominal)

Part Numbers Dimensions cm (in) Weight kg (lb)
A B
JD20 50.65 (19.94) 13.03 (5.13) 1.93 (4.25)

Typical Flow vs. Differential Pressure2

2 Flow / pressure drop characteristics refer to the empty housing only. For liquids other than water, multiply differential pressure by the specific gravity of the fluid.

JD20 – 3/4 [Table 1]

Table 1

Code O-ring Materials
Blank Fluoroelastomer
N Nitrile
S Silicone

We appreciate your review of this product. Please login to your account to leave a review.