P Emflon® HV2 Filter product photo Primary L

P Emflon® HV2 Filter

Pall's P Emflon® HV2 filter is recommended specifically for high-viscosity fluids up to 15,000 mPa•s, such as polyimide coatings and adhesive emulsions.

The P Emflon HV2 is designed to withstand the high differential pressure associated with viscous fluids while maintaining stable flow rates.

Low extractables are ensured by the use of high density polyethylene hardware and PTFE medium.

 
Features Benefits
Optimized design for high-viscosity fluids
  • Enables filtration of fluids up to 15,000 mPa·s
Ultipleat® construction
  • Low pressure drop
  • Stable flow performance
PTFE and HDPE materials
  • Excellent compatibility
  • Very low extractables
 


* Required
Need Help?
Download Datasheet
Description
Pall's P Emflon® HV2 filter is recommended specifically for high-viscosity fluids up to 15,000 mPa•s, such as polyimide coatings and adhesive emulsions.

The P Emflon HV2 is designed to withstand the high differential pressure associated with viscous fluids while maintaining stable flow rates.

Low extractables are ensured by the use of high density polyethylene hardware and PTFE medium.

 
Features Benefits
Optimized design for high-viscosity fluids
  • Enables filtration of fluids up to 15,000 mPa·s
Ultipleat® construction
  • Low pressure drop
  • Stable flow performance
PTFE and HDPE materials
  • Excellent compatibility
  • Very low extractables
 
Specifications

Materials of Construction

 
Medium PTFE
Support and drainage High-density polyethylene (HDPE)
Core High-density polyethylene (HDPE)
Cage High-density polyethylene (HDPE)
End caps High-density polyethylene (HDPE)
O-ring FEP Encapsulated fluoroelastomer
 

 
Removal Ratings 0.2 μm, 0.45 μm, 1 μm
Filter Areas 0.8 m2 / 8.6 ft2
Maximum Temperature 40 °C / 104 °F
Maximum Differential Pressure 0.34 MPa / 3.5 kgf/cm2 (@ 40 °C / 104 °F)
 
Performance

Pressure Drop vs. Liquid Flow Rate

3500 mPa•s Fluid
3500 mPa•s Fluid

Flow rate vs. Viscosity
Flow rate vs. Viscosity
Type
Filter Cartridges
Ordering Information
This information is a guide to the part number structure and possible options. For availability of specific options and housing details, please contact Pall.

Example Part Number: ABD 2 UFR 7 E H1 -HV2 ( See bold references in tables below)

Part Number: ABD [1] [2] [3] E [4] -HV2

Table 1 - Length (mm / in.)

 
Code Length (mm / in.)
1 254 / 10
2 508 / 20
3 762 / 30
 

Table 2 - Removal Ratings (μm)

 
Code Removal Ratings (μm)
UFR 0.2
UFX 0.45
UFN 1
 

Table 3 - O-ring size / Endcap

 
Code O-ring size / Endcap
3 AS568A-222 / Flat
7 AS568A-226 / Bomb fin
8 AS568A-222 / Bomb fin
 

Table 4 - O-ring Material

 
Code O-ring Material
H1 FEP Encapsulated fluoroelastomer
 

For availability of specific options and housing details, please contact your Pall Corporation representative.
Application
Photolithography