Ultipleat® PK Gas Filter product photo Primary L

Ultipleat® PK Gas Filter

The Ultipleat PK CDA filter is designed for clean dry air and nitrogen applications in the LCD and semiconductor industries.  It is rated for flows up to 10,000 SLPM (353 SCFM). 

Product Features
  • Unique Ultipleat filter construction
  • Single open-ended cartridge with o-ring seal
  •  High particle retention
  • Exceptionally high flow rates
  • Low differential pressure
  • 100% integrity tested


Product Benefits

  • Ultipleat filter construction allows for high-flows at the point-of-use (POU) where space is limited.
  • Compact design enables efficient filter changeouts, thereby reducing equipment downtime.

 



* Required
Need Help?
Download Datasheet
Description
The Ultipleat PK CDA filter is designed for clean dry air and nitrogen applications in the LCD and semiconductor industries.  It is rated for flows up to 10,000 SLPM (353 SCFM). 

Product Features
  • Unique Ultipleat filter construction
  • Single open-ended cartridge with o-ring seal
  •  High particle retention
  • Exceptionally high flow rates
  • Low differential pressure
  • 100% integrity tested


Product Benefits

  • Ultipleat filter construction allows for high-flows at the point-of-use (POU) where space is limited.
  • Compact design enables efficient filter changeouts, thereby reducing equipment downtime.

 

Specifications
Materials
• Medium: PTFE
• Support: Polypropylene
• Cage and end caps: Polypropylene
• O-ring:  EPR

Removal Rating
• ≥ 3 nm in gas service

Typical Filter Area
• 1.8 m2/19.4 ft

Operating Conditions
Maximum operating temperature
• 50°C/122°F
Maximum differential pressure
• 0.41 MPa @ 20°C/60 psid @ 68°F
• 0.20 MPa @ 50°C/30 psid @ 122°F

Dimensions


Performance

Pressure Drop vs. Air Flow Rate

Type
Cartridges and Elements
Use
Filtration
Additional Information

Filter Housings

Ultipleat PK gas stainless steel filter housings are available in a wide variety of connection sizes and types, surface finishes, and code requirements to meet your specific needs. Please contact your local Pall representative to discuss the appropriate housing for your application.
Ordering Information
Part Number Nominal Length Seal
UPK510FGJU 254 mm / 10 in. EPR (U-cup)
Application
Process gas filtration, ガス ろ過 & 精製