Profile® UP Filter product photo Primary L

Profile® UP Filter

This Profile UP filter consists of a pleated, depth medium using the Ultipleat® filter geometry. The result is a resin trap, pre-RO or cooling water filter with superior flow vs. differential pressure capabilities.
  • All polypropylene construction
  • High particle removal efficiency
  • Long service life
  • Fixed pore structure
  • Low extractables
  • No surfactants or binder resins used during manufacture
  • Available in many removal ratings
  • Available in an RF configuration so the cartridge may fit into a housing designed to hold either a 64 mm or 70 mm / 2.5 in. or 2.75 in. O.D. filter
  • Very low clean pressure drop


Contact Us
* Required

Documents

Datasheets

Download: English | Japanese

Description

This Profile UP filter consists of a pleated, depth medium using the Ultipleat® filter geometry. The result is a resin trap, pre-RO or cooling water filter with superior flow vs. differential pressure capabilities.
  • All polypropylene construction
  • High particle removal efficiency
  • Long service life
  • Fixed pore structure
  • Low extractables
  • No surfactants or binder resins used during manufacture
  • Available in many removal ratings
  • Available in an RF configuration so the cartridge may fit into a housing designed to hold either a 64 mm or 70 mm / 2.5 in. or 2.75 in. O.D. filter
  • Very low clean pressure drop

Specifications

Materials

  • Medium: Polypropylene
  • Core, cage, end caps: Polypropylene
  • Gasket: Polyethylene
  • O-ring: Silicone

Removal Ratings

  • 3.2 μm, 4.5 μm, 6 μm, 10 μm, 20 μm, 30 μm, 40 μm, 50 μm, 70 μm, 100 μm

Configurations

  • RF style filter available as a 254 mm / 10 in., 508 mm / 20 in., 762 mm / 30 in., or 1016 mm / 40 in. long filter cartridge
  • Diameter: 64 mm / 2.5 in.
  • Double open end, flat gasket welded to each end
  • AB style Code 3, 7 and 8 available as 254 mm / 10 in., 508 mm / 20 in., 762 mm / 30 in., or 1016 mm / 40 in. long filters

Operating Characteristics

  • Maximum Differential Pressure:
    • 0.41 MPa @ 30°C / 60 psid @ 86°F;
    • 0.34 MPa @ 50°C / 50 psid @ 122°F;
    • 0.21 MPa @ 70°C / 30 psid @ 158°F;
    • 0.1 MPa @ 80°C / 15 psid @ 176°F

Performance

Removal Rating/Pressure Drop

 
Cartridge Grade Removal Rating in Microns (μm) at % Efficiency1 Clean Pressure Drop in Water Per 254 mm / 10 in. Element
90% 99.98% kPa / 10 L / min psi / gpm
UY020 < 1 3.2 2.37 0.13
UY045 1.2 4.5 1.55 0.085
UY060 2.5 6 0.64 0.035
UY100 4.3 10 0.55 0.030
UY200 10.5 20 0.46 0.025
UY300 16.5 30 0.36 0.020
UY400 19 40 0.27 0.015
UY500 25 50 0.18 ≤ 0.010
UY700 35 2 0.18 ≤ 0.010
UY1000 60 2 0.18 ≤ 0.010
 

Type

Filter Cartridges

Ordering Information

 
Part Number Removal
Rating
(μm)
Nominal
Length3
(mm / in.)
Configuration3 Code O-Ring/Gasket Material3
AB1UY0203H4 3.2 254 / 10 3 Silicone
R1FUY020J8 3.2 254 / 10 Double Open End / Flat Gasket Polyethylene
AB1UY0453H4 4.5 254 / 10 3 Silicone
R1FUY045J8 4.5 254 / 10 Double Open End / Flat Gasket Polyethylene
AB1UY0603H4 6 254 / 10 3 Silicone
R1FUY060J8 6 254 / 10 Double Open End / Flat Gasket Polyethylene
AB1UY1003H4 10 254 / 10 3 Silicone
R1FUY100J8 10 254 / 10 Double Open End / Flat Gasket Polyethylene
AB1UY2003H4 20 254 / 10 3 Silicone
AB1UY4003H4 40 254 / 10 3 Silicone
R1FUY400J8 40 254 / 10 Double Open End / Flat Gasket Polyethylene
AB1UY10003H4 100 254 / 10 3 Silicone
 
1 Rating of filter is based upon the modified Oklahoma State University (OSU) F-2 Filter Performance (Beta Rating) Test.
2 Precision evaluation of the 99.98% removal efficiency for these coarse grades is not possible with the OSU test procedure utilized.
3 Other lengths, configurations and gasket materials are available.


Unit conversion: 1 bar = 100 kilopascals

Reviews

We appreciate your review of this product. Please login to your account to leave a review.