316L Stainless Steel Housings product photo Primary L

316L Stainless Steel Housings

The Pall multistack high performance 316L stainless steel P-series housing can be designed and manufactured in accordance with A.D. Merkblatter or ASME Code. Pall's experience in housing manufacturing and filtration technology offers the user many benefits: crevice-free construction, easy-to-use closures, quick cartridge change, and 145 psi / 10 bar gauge working pressure at temperatures up to 365 ºF / 185 ºC. These housings are designed and manufactured by Pall to quality standards which are approved to ISO 9001 (BS 5750 part 1).
  • Ideal for DI Water filtration
  • Large vent connection for rapid venting
  • All fluid contact surfaces manufactured from 316L stainless steel
  • Glass beaded and passivated surface finish provides maximum resistance to corrosion and good cosmetic appearance
  • Quick cartridge changeout
  • Hydrodynamically designed inlet and outlet connections ensure excellent flow characteristics
  • Large drain located upstream to minimize fluid hold-up volume


* Required
Need Help?
Download Datasheet
Description
The Pall multistack high performance 316L stainless steel P-series housing can be designed and manufactured in accordance with A.D. Merkblatter or ASME Code. Pall's experience in housing manufacturing and filtration technology offers the user many benefits: crevice-free construction, easy-to-use closures, quick cartridge change, and 145 psi / 10 bar gauge working pressure at temperatures up to 365 ºF / 185 ºC. These housings are designed and manufactured by Pall to quality standards which are approved to ISO 9001 (BS 5750 part 1).
  • Ideal for DI Water filtration
  • Large vent connection for rapid venting
  • All fluid contact surfaces manufactured from 316L stainless steel
  • Glass beaded and passivated surface finish provides maximum resistance to corrosion and good cosmetic appearance
  • Quick cartridge changeout
  • Hydrodynamically designed inlet and outlet connections ensure excellent flow characteristics
  • Large drain located upstream to minimize fluid hold-up volume
Specifications

Materials of Construction

  • Shell, Head, and Tubesheet: 316L stainless steel
  • Rathmann Clamps: Veralit nickel plated carbon steel
  • Clamp Mounting Ring: 304 stainless steel
  • Legs: 304 stainless steel
  • Foot Pads: 304 stainless steel

Configurations

  • Inlet/Outlet Connections: 80-200 mm BS4504 T16 flange, 2-8 in. ANSI flange options
  • Vent/Drain: 1/2 in. BSPT male, 1/2 in. NPT
  • Cartridge Adapter: Code 3, 7, or 8

Operating Conditions

  • 145 psi @ 302 °F / 10 bar @ 150 °C for EPR gaskets
  • 145 psi @ 365 °F / 10 bar @ 185 °C for Viton1 gaskets

Cartridge Capacity

  • 5-around
  • 12-around
  • 31-around

Cartridge Lengths Accepted

  • 20 in. / 508 mm, 40 in. / 1016 mm

Cartridge Configurations Accepted

  • Code 3 - two 222 O-rings, flat end cap
  • Code 7 - two 226 O-rings, locator fin, bayonette lock
  • Code 8 - two 222 O-rings, locator fin

Design Options

A.D. Merkblatter
ASME Code U Stamp
Electropolishing available

Connections Available

  • 2 in., 3 in., 4 in., 6 in., and 8 in. ANSI flange
  • 80 mm, 100 mm, 200 mm BS4504 T16 flange
1 Viton is a trademark of DuPont Dow Elastomers.


Other options available - please contact Pall Microelectronics for details and ordering information.
Performance

Pressure Drop vs. Liquid Flow Rate2

Pressure Drop vs. Liquid Flow Rate
2 The liquid flow/pressure drop characteristics refer to the empty housing only for water at 20ºC / 68°F. For other liquids, multiply pressure drop by the specific gravity.


Unit conversion: 1 bar = 100 kilopascals
Additional Information

Housing Drawing

Housing Drawing
Segment
Semiconductor