Megaplast™ Polypropylene and PVDF Filter Housings (Ultrapure Water Filtration) product photo Primary L

Megaplast™ Polypropylene and PVDF Filter Housings (Ultrapure Water Filtration)

The Megaplast Polypropylene and PVDF filter housings are designed to provide excellent mechanical characteristics without utilizing any metallic components. The Megaplast Polypropylene housing accommodates 10 in. / 254 mm cartridges and is suitable for water service. The Megaplast PVDF housing accommodates 10 in. / 254 mm and 20 in. / 508 mm cartridges and is suitable for water and chemical service. The connections on both housings are molded directly into the head and bowl, reducing the space required for fit up.
  • Low hold-up volume
  • Metal free construction
  • Closure threads are on the "dry" side
  • Closure nut is free floating
  • Cleaned and packaged under controlled cleanroom conditions


* Required
Need Help?
Download Datasheet
Description
The Megaplast Polypropylene and PVDF filter housings are designed to provide excellent mechanical characteristics without utilizing any metallic components. The Megaplast Polypropylene housing accommodates 10 in. / 254 mm cartridges and is suitable for water service. The Megaplast PVDF housing accommodates 10 in. / 254 mm and 20 in. / 508 mm cartridges and is suitable for water and chemical service. The connections on both housings are molded directly into the head and bowl, reducing the space required for fit up.
  • Low hold-up volume
  • Metal free construction
  • Closure threads are on the "dry" side
  • Closure nut is free floating
  • Cleaned and packaged under controlled cleanroom conditions
Specifications

Materials

Polypropylene TAX/TRX Housing
  • Molded natural polypropylene head and bowl with molded connections, vent and drain
  • Closure nut: Glass filled polyamide
  • O-ring1: Ethylene propylene
PVDF TAV Housing
  • Molded PVDF head and bowl with molded connections, vent and drain
  • Closure nut: Glass filled PVDF
  • O-ring1: Ethylene propylene or Teflon2 encapsulated Viton2

Configurations

  • Connection options: DIN 25 male
  • Vent/drain connections
    • Bowl: 14 in. BSP parallel female
    • Head: 14 in. BSP parallel female or supplied blank
  • Polypropylene TAX/TRX Housing: AB Code 3 or RF style, 10 in. / 254 mm cartridges
  • PVDF TAV Housing: AB Code 3, 10 in. / 254 mm and 20 in. / 508 mm cartridges (double 222 O-ring / flat end)

Operating Conditions

Polypropylene TAX/TRX Housing
  • Maximum Operating Pressure: Water service: 72.5 psig @ 104 °F / 5.0 bar @ 40 °C
PVDF TAV Housing:
  • Maximum Operating Pressure:
    • Water service: 145.0 psig @ 104 °F / 10.0 bar @ 40 °C, 108.8 psig @ 176 °F / 7.5 bar @ 80 °C
    • Chemical service: 50.8 psig @ 104 °F / 3.5 bar @ 40 °C
1 Other options may be available
2 Teflon and Viton are registered trademarks of DuPont Dow Elastomers
Performance

Pressure Drop vs. Liquid Flow Rate3

Pressure Drop vs. Liquid Flow Rate
3 For liquids other than water, multiply the pressure drop by the specific gravity of the fluid.
Type
Filter Housings
Use
Filtration
Ordering Information
Part Number4 Description O-ring Length (L)
(in. / mm)
TAX011G26JD 10 in. / 254 mm Polypropylene housing, AB Code 3 Ethylene propylene 13.2 / 336
TRX011G26JD 10 in. / 254 mm Polypropylene housing, RF Style Ethylene propylene 13.2 / 336
TAVW011G26JD 10 in. / 254 mm PVDF housing, Water service Ethylene propylene 13.1 / 333
TAVW012G26JD 20 in. / 508 mm PVDF housing, Water service Ethylene propylene 23.2 / 590
TAVC011G26H1D 10 in. / 254 mm PVDF housing, Chemical service Teflon encapsulated Viton 13.1 / 333
TAVC012G26H1D 20 in. / 508 mm PVDF housing, Chemical service Teflon encapsulated Viton 23.2 / 590
4 Omit the "D" at the end of the part number to request that the vent and drain connections be supplied blank.


Unit conversion: 1 bar = 100 kilopascals
Application
Ultrapure water
Segment
Semiconductor