1. Home/
  2. Microelectronics/
  3. Semiconductor/
  4. Wet etch & cleans/
  5. UltiKleen™ STG Filter
UltiKleen™ STG Filter product photo Primary L

UltiKleen™ STG Filter

The Pall UltiKleen STG filter is specifically designed for the filtration of organic stripper in non-ashing polymer stripping applications, where the large gel count is high.

The large size of these gels can rapidly plug conventional membrane filters leading to short filter life and process downtime.

The UltiKleen STG filter uses a highly engineered multilayer media construction that combines high gel retention capacity layers with an optimized pleat design for maintaining continuous fluid flow.

The result is superior gel removal and long filter life for extended process operation.
  • Maximum Gel Removal
  • Improved Flow
  • Multilayer Media Design
  • All fluoro-polymer construction
  • 100% integrity tested
  • Prefilter and Final filter grades
Read More


Contact Us
* Required

Datasheets

Download: English | Japanese
The Pall UltiKleen STG filter is specifically designed for the filtration of organic stripper in non-ashing polymer stripping applications, where the large gel count is high.

The large size of these gels can rapidly plug conventional membrane filters leading to short filter life and process downtime.

The UltiKleen STG filter uses a highly engineered multilayer media construction that combines high gel retention capacity layers with an optimized pleat design for maintaining continuous fluid flow.

The result is superior gel removal and long filter life for extended process operation.
  • Maximum Gel Removal
  • Improved Flow
  • Multilayer Media Design
  • All fluoro-polymer construction
  • 100% integrity tested
  • Prefilter and Final filter grades

Materials

  • Filter Media: PTFE
  • Media Support: PTFE, PFA
  • Cage, core, and end caps: High purity PFA
  • O-ring option: FEP encapsulated fluoroelastomer, Perfrez1
    • PXC-Ultra

Removal Ratings

  • 50 μm, 10 μm, 0.2 μm, 0.1 μm

Filter Areas

  • 254 mm / 10 in. (ABF1): 0.48 m2 / 5.2 ft2
  • 254 mm / 10 in. (ABFG1): 0.5 m2 / 5.4 ft2

Configurations

Diameter:
  • ABF: 70 mm / 2.75 in.
  • ABFG: 83 mm / 3.27 in.
Nominal Lengths:
  • 254 mm / 10 in.
O-Ring Size / end caps:
  • Code 3 (222 double O-ring / flat end)

Operating Conditions

Maximum Operating Temperature:
  • 170 °C / 338 °F
Maximum Forward Differential Pressure:
  • 4.2 kg/cm2 @ 110 °C / 60 psid @ 230 °F
Maximum Reverse Differential Pressure:
  • 3.5 kg/cm2 @ 20 °C / 50 psid @ 68 °F
1 Perfrez PXC-Ultra is a trademark of Applied Seals North Americas

Pressure Drop vs. Liquid Flow Rate2

Pressure Drop vs. Liquid Flow Rate

Pressure Drop vs. Liquid Flow Rate
2 Typical flow rates. For liquids with viscosity differing from water, multiply the pressure drop by the viscosity in centipoise.


Field Test Results of UltiKleen STG Filter vs Conventional Filter

Field Test Results of UltiKleen STG Filter vs Conventional Filter

The graph shows the results of tests conducted at one of Japan's largest semiconductor manufacturer's and the increase of filter life with the Ultikleen STG filter vs. a conventional design fluoro-polymer membrane filter.
Filter Capsules
Part Number3 Removal
Rating (μm)		 Nominal
Length
(mm / in.)		 Configuration
Code		 O-Ring Material4
ABFG1STGM3EH38-K3 50 254 / 10 3 Perfrez PXC-Ultra
ABFG1STGM3EH1 50 254 / 10 3 FEP Encapsulated fluoroelastomer
ABFG1STGE3EH1-K3 10 254 / 10 3 FEP Encapsulated fluoroelastomer
ABF1STGR3EH1 0.2 254 / 10 3 FEP Encapsulated fluoroelastomer
ABF1STGR3EH1-K3 0.2 254 / 10 3 FEP Encapsulated fluoroelastomer
ABF1STGT3EH1 0.1 254 / 10 3 FEP Encapsulated fluoroelastomer
ABF1STGT3EH1-K3 0.1 254 / 10 3 FEP Encapsulated fluoroelastomer
3 "K3" at end of part number added for prewet option.

Unit Conversion: 1 kg/cm2 = 0.98 bar

We appreciate your review of this product. Please login to your account to leave a review.