IOL Series Filter Housing product photo Primary L

IOL Series Filter Housing

  • Single cartridge housing accepts AB style, single open end filter elements
  • All wetted parts are made of stainless steel construction
  • Accepts 1 in. (2.54 cm), 5 in. (12.7 cm), 10 in. (25.4 cm), 20 in. (50.8 cm) or 30 in. (76.2 cm) Code 3, Code 7, Code 8 or Code 18 filter cartridges
  • In-line inlet and outlet connections for easy installation
  • Quick opening t-handle v-band clamp facilitates filter change-out
  • Wide choice of inlet/outlet sizes and o-ring seal options
  • Passivated for purity

For detailed information about this product, please refer to the data sheet. (To download this data sheet, select Download PDF from the menu above.)



* Required
Need Help?
Download Datasheet
Description
  • Single cartridge housing accepts AB style, single open end filter elements
  • All wetted parts are made of stainless steel construction
  • Accepts 1 in. (2.54 cm), 5 in. (12.7 cm), 10 in. (25.4 cm), 20 in. (50.8 cm) or 30 in. (76.2 cm) Code 3, Code 7, Code 8 or Code 18 filter cartridges
  • In-line inlet and outlet connections for easy installation
  • Quick opening t-handle v-band clamp facilitates filter change-out
  • Wide choice of inlet/outlet sizes and o-ring seal options
  • Passivated for purity

For detailed information about this product, please refer to the data sheet. (To download this data sheet, select Download PDF from the menu above.)

Specifications

Housing Specifications

Design ratings1

260 psig (17.9 bar) @ 100°F (40°C)
200 psig (13.8 bar) @ 300°F (150°C)

NOTE: Above ratings apply to housing only. Cartridge and housing O-ring selection may impose different and narrower limitations. If Canadian registration is required refer to IOLC Data Sheet PIIOLCEN for CRN approved filter housings.

Materials of construction

Head: 316L stainless steel
Bowl: 316 stainless steel

Connections

Inlet/Outlet: 3/4" NPT, 1" NPT, 3/4" BSPT, 1" BSPT
Flange Option: 150 lb. ANSI raised face flanges for 1 in. IOL housings
Vent/Drain: 1/4" NPT, BSPT or BSPP

Shell O-rings

FEP encapsulated fluorocarbon elastomer, silicone elastomer, fluorocarbon elastomer, nitrile, ethylene propylene, ethylene propylene for steam service

Bracket option

Stainless steel brackets are available as a standard option.
1 Fully vacuum rated.
Performance

Housing Differential Pressure vs. Liquid Flow Rate



Housing Differential Pressure vs. Air Flow Rate



For liquids other than water, multiply differential pressure by specific gravity.


 
Model Flow2 Rate (gpm / lpm) Dimensions Volume Weight Empty
A B C D Threaded Nozzle Flanged Nozzle
in./mm in./mm in./mm in./mm Gal/L lbs/Kg lbs/Kg
IOL301 1/3.78 5.81/147.57 4.81/122 9.81/250 2/50.8 .04 /.15 4.5/2 ---
IOL305 5/19 7.8/198 4.81/122 9.81/250 4/102 0.11 /0.4 5.1/2.32 11.9/5.4
IOL31 10/38 16.5/419 4.81/122 9.81/250 12.63/321 0.42/1.6 5.95/2.7 12.8/5.8
IOL32 20/76 26.25/667 4.81/122 9.81/250 22.5/572 0.82/3.1 6.92/3.14 13.7/6.2
IOL33 30/114 36.13/918 4.81/122 9.81/250 32.38/822 1.22/4.6 7.89/3.58 14.7/6.7
IOL701 1/3.78 5.81/147.57 4.81/122 9.81/250 2/50.8 .04 /.15 4.5/2 ---
IOL705 5/19 7.8/198 4.81/122 9.81/250 4/102 0.11/0.4 5.1/2.32 11.9/5.4
IOL71 10/38 16.5/419 4.81/122 9.81/250 12.63/321 0.42/1.6 5.95/2.7 12.8/5.8
IOL72 20/76 26.25/667 4.81/122 9.81/250 22.5/572 0.82/3.1 6.92/3.14 13.7/6.2
IOL73 30/114 36.13/918 4.81/122 9.81/250 32.38/822 1.22/4.6 7.89/3.58 14.7/6.7
IOL801 1/3.78 5.81/147.57 4.81/122 9.81/250 2/50.8 .04 /.15 4.5/2 ---
IOL805 5/19 7.8/198 4.81/122 9.81/250 4/102 0.11/0.4 5.1/2.32 11.9/5.4
IOL81 10/38 16.5/419 4.81/122 9.81/250 12.63/321 0.42/1.6 5.95/2.7 12.8/5.8
IOL82 20/76 26.25/667 4.81/122 9.81/250 22.5/572 0.82/3.1 6.92/3.14 13.7/6.2
IOL83 30/114 36.13/918 4.81/122 9.81/250 32.38/822 1.22/4.6 7.89/3.58 14.7/6.7
IOL1801 1/3.78 5.81/147.57 4.81/122 9.81/250 2/50.8 .04 /.15 4.5/2 ---
IOL1805 5/19 7.8/198 4.81/122 9.81/250 4/102 0.11/0.4 5.1/2.32 11.9/5.4
IOL181 10/38 16.5/419 4.81/122 9.81/250 12.63/321 0.42/1.6 5.95/2.7 12.8/5.8
IOL182 20/76 26.25/667 4.81/122 9.81/250 22.5/572 0.82/3.1 6.92/3.14 13.7/6.2
IOL183 30/114 36.13/918 4.81/122 9.81/250 32.38/822 1.22/4.6 7.89/3.58 14.7/6.7
 






Type
Cartridges and Elements
Use
Filtration
Ordering Information
Pall Part Number = IOL [1] [2] G [3] [4]

Table 1

 
Code Cartridge style
3 Code 3
7 Code 7
8 Code 8
18 Code 18
 

Table 2

 
Code Bowl length
01 1 in (available in Code 3 only, with N16 or B16 option) 1 10 in.
2 20 in.
05 5 in. 3 30 in.
 

Table 3

 
Code Inlet/outlet and vent/drain size
N12 3/4" NPT/1/4" NPT
N16 1" NPT/1/4" NPT
B12 3/4" BSPT/1/4" BSPT
B16 1" BSPT/1/4" BSPT
B17 1" ANSI flange /1/4" BSPT
N17 1" ANSI flange /1/4" NPT
P17 1" ANSI flange /1/4" BSPP
P19 1" BSPP /1/4" BSPP
B35 1" BS4504 flange /1/4" BSPT
P35 1" BS4504 flange /1/4" BSPP
 

Table 4

 
Code Seal materials
H Fluorocarbon elastomer
H1 FEP encapsulated fluorocarbon elastomer
H4 Silicone
H13 Nitrile
J Ethylene propylene
J7 Ethylene propylene for steam service