Order Products
Cartridge Length (Imperial)
10 in
Length
102 cm / 40 in
![Claris® Filter Cartridges, Removal Rating 50 μm, Polypropylene, Length 10 inches product photo](/INTERSHOP/static/WFS/PALL-PALLUS-Site/-/PALL/en_US/images/Water-Treatment/ds_pho_CLARIS.jpg)
Claris® Filter Cartridges, Removal Rating 50 μm, Polypropylene, Length 10 inches
36/EA
36
Documents
Datasheets
Download:Description
Claris® Series Filter Cartridges
An innovative extruded core provides a low-cost alternative to molded cores, without compromising filter strength or media depth.
Multiple fiber zones created by a proprietary and highly automated melt-blowing process result in a consistent and graded pore structure. The different pore sizes allow for the efficient capture of various sized particles and maximum usage of the filter's depth.
Combined, these features provide a long life,
![Claris](/INTERSHOP/static/WFS/PALL-PALLUS-Site/-/PALL/en_US/images/Industrial-Manufacturing/Claris1.jpg)
Features | Benefits | |||
CoLD® Technology Manufacture | ||||
Enhanced mechanical strength to increase resistance to media |
||||
Melt blown depth media with graded pore structure |
Efficient capture of various particle sizes, maximizing the usage of the entire filter's depth |
|||
Thermally bonded fibers | Consistent filtration performance | |||
High void volume | Long service life due to high dirt holding capacity |
|||
High strength extruded core | Enables economy without compromising flow or cartridge stability Broad chemical compatibility, suitable for use in a variety of fluids |
|||
All polypropylene construction, without adhesives, binders or surfactants |
Broad chemical compatibility, suitable for use in a variety of fluids |
|||
Quality
- Cartridges produced in a controlled environment
- Manufactured within a Quality Management System certified to ISO 9001:2008
Specifications
Materials of Construction
Component | Description |
Filter Medium | Polypropylene |
Core, Fin End |
Polypropylene |
SOE Style Cartridges only | |
Adaptor | Polypropylene |
O-ring Seal | Silicone Elastomer Ethylene Propylene Rubber |
Operating Characteristics in Compatible Fluids1
Maximum Differential Pressure2 | Operating Temperature |
1.72 bard (25 psid) | 60 °C (140 °F) |
3.45 bard (50 psid) | 20 °C (68 °F) |
![Performance Graph](/INTERSHOP/static/WFS/PALL-PALLUS-Site/-/PALL/en_US/images/Industrial-Manufacturing/Claris3.jpg)
1Fluids which do not swell, soften, or adversely affect any of the filter components
2Recommended change-out differential pressure is 2.4 bard (35 psid), provided the maximum differential pressure (based on temperature) is not exceeded.
Performance
Flow Rates 3
![Performance Graph](/INTERSHOP/static/WFS/PALL-PALLUS-Site/-/PALL/en_US/images/Industrial-Manufacturing/Claris2.jpg)
3 Typical initial clean Δp for a 254 mm (10
Type
Ordering Information
This information is a guide to the part numbering structure and possible options. For availability of specific options, please contact Pall. Refer to Pall for housing details.
Part Number: CLR - [1] - [2] [3] [4]
Example Part Number: CLR510M7WS480 See bold reference codes in tables.
Table 1: Removal Rating
Code | Description |
1 | 1 μm |
3 | 3 μm |
5 | 5 μm |
10 | 10 μm |
Table 2: Length
Code | Description |
DOE Style only: | |
5 | 127 mm (5") |
975 | 248 mm (9.75") |
9875 | 251 mm (9.875") |
10 | 254 mm (10") |
195 | 495 mm (19.5") |
20 | 508 mm (20") |
2925 | 743 mm (29.25") |
295 | 749 mm (29.5") |
30 | 762 mm (30") |
39 | 991 mm (39") |
40 | 1016 mm (40") |
50 | 1270 mm (50") |
SOE Style only: | |
10 | 254 mm (10") |
20 | 508 mm (20") |
30 | 762 mm (30") |
40 | 1016 mm (40") |
Table 3: Adaptor
Code | Description |
blank | DOE with no endcaps |
M3 | SOE - single open end with flat closed end and external 222 O-rings |
M6 | SOE - single open end with flat closed end, 2 locking tabs and external 226 O-rings |
M7 | SOE - single open end with fin end, 2 locking tabs and external 226 O-rings |
M8 | SOE - single open end with fin end and external 222 O-rings |
Table 4: O-ring Seal Material4
Code | Description |
S | Silicone Elastomer |
E | Ethylene Propylene Rubber |
Reviews
We appreciate your review of this product. Please login to your account to leave a review.