Documents
Datasheets
Download:Description
The most extensively used backflushable pleated filter in power plant condensate.
- Backflushable pleated filter designed specifically for use in power plants
- The Hydro-Guard K is used in condensate with or without resin precoat
- Constructed with the highest purity materials (no fillers, talcs, TiO2 or surfactants) for minimal rinse-up time
- Surface area exceeds that of conventional condensate filters by a 20:1 ratio for lower pressure drops, increased filter life and longer backflush cycles
- Eliminates costs associated with use and disposal of powdered resins
- Iron oxide and suspended copper are typically reduced by 98%+
- Absolute construction and surface retention for efficient backflushing and particle removal
Specifications
| Filter Media: | Polyaramid |
| Support Material: | Polyester |
| Hardware: | Stainless Steel |
| Sealing: | Epoxy Resin |
| Gasket/O-ring Materials: | EPDM (standard), Others available |
Pressure Drop/Flow Data
Type
Filter Cartridges
Ordering Information
HGK - ■ - ● - A - E - DOE - EDF - R
(e.g. HGK–1–725–A–E–DOE-EDF-R)
| Code | Filter Grades* |
| 1 | 1 μm |
| 5 | 5 μm |
*Based on typical application usage.
For details, contact Pall Corporation.
| Code | Cartridge Lengths (nominal) |
| 475 | 19” (47.5 cm) |
| 725 | 28.5” (72.5 cm) |
| Code | Gasket/O-ring Materials |
| E | EPDM |
| Code | End Configurations |
| DOE | DOE with elastomer gasket seal and endcaps |
| EDF | Manufactured to EDF specifications |
| R | Pre-rinsed in hot DI water to reduce rinse up time |
Reviews
We appreciate your review of this product. Please login to your account to leave a review.
