The HLP series combines the water removal performance of mass transfer purifiers with high reliability and ease-of-use to help ensure maximum equipment uptime and the lowest cost of ownership – enabling you to focus on your process, and not your equipment.
Improved PerformanceThe Pall HLP series purifier has a new vacuum tower design that results in very efficient water removal.
Maximum Reliability, Lower Cost of OwnershipHLP series purifiers are designed for maximum uptime, and have proven themselves in the field, exhibiting higher utilization rates even in the most demanding and continuous duty applications.
The HLP22 uses specially selected components to help ensure maximum reliability and lower the cost of ownership. These premium components include:
- Best-in-class Allen Bradley PLC
- Reliable claw-style vacuum pump with 12-month service interval.
- Viking gear pumps – proven performers for more than 20 years in Pall purifiers.
Controlling the dissolved as well as the free water in the reservoir is critical in ensuring the absence of free water during operation. With the Pall HLP22 purifier, this is done efficiently, easily, and reliably. The diagram below illustrates the concept.
Removing Free Water is Never Enough!
1 Initial water content is above saturation (free water).
2 Maximum water removal capability of “free water removal” devices (coalescers, centrifuges, etc.) is to the oil’s saturation point.
3 Water content achieved with mass transfer dehydration is significantly below the oil’s saturation point.
4 Water content achieved with mass transfer dehydration remains below the oil’s saturation point even after the oil is cooled. This prevents the formation of free water, harmful to the system.
5 If only free water is removed at the initial temperature, when oil is cooled the amount of harmful free water in the oil can increase significantly.
Ease of UseThe HLP22 series offers the following features to increase versatility in service and lower cost of ownership:
- Low maintenance
- Able to work with a wide range of oil viscosities (3 cSt to 1000 cSt)
- No utility water required for cooling or pump operation – the only utility needed is an electrical power source
Standard FeaturesPall HLP series purifiers come with the following standard features that many suppliers charge extra for:
• Dissolved water sensor (Pall model WS10)
• Low watt density heater (15kw output)
• Condenser with gravity drain
Focus on Your Process, Not on Your Purifier
HLP Series purifiers, such as the HLP22, require less user interaction, which allows users to focus more on their process and less on the maintenance and upkeep of their purifier.
The HLP purifier is one of the easiest purifiers to operate. Simply connect the purifier to the reservoir, power up, and press the start button. In fact, many HLP users are able to just “press the button and walk away”.
- Extended vacuum pump oil change interval – 12 months (8760 hours of run time)
- No water utility for cooling or pump operation
|Flow Rate:||22 GPM (83 LPM)|
|Dry Mass:||1932 lbs (876 kg)|
(caster or floor mount):
|79 in. H x 68.5 in. L x 35 in. W|
(201 cm x 174 cm x 89 cm)
|Viscosity Range:||3 cSt to 1000 cSt|
|Enclosure:||NEMA 4 (IP65)|
|Inlet Fluid Temperature:||170 °F (76.7 °C) maximum|
|39 °F to 105 °F |
(3.9°C to 40.6°C)
|Inlet Pressure Range:||-14 in. Hg to 10 PSI|
(-0.47 bar to 0.69 bar)
|Outlet Pressure Relief Setting:||80 psi (5.5 barg) maximum|
|Operating Vacuum Range:||15 in. Hg to 22 in. Hg|
(-0.51 bar to -0.75 bar)
|Heater Capacity:||15 KW (low watt density)|
|Paint Scheme:||Powder coated (suitable for industrial phosphate ester service)|
|Fluid Filter Housing:||UR699 series with 40 in. element|
HLP Series oil purifiers showed a 40% faster dehydration rate when compared to a commonly used, similarly sized purifier.
* WS10 water sensor is standard equipment on all HLP purifiers
|R3||380V / 50 Hz / 3P|
|W4||480V / 60 Hz / 3P|
|14||575V / 60 Hz / 3P|
|Code||Filter Element Options|
|ßx(c) ≥1000 based on ISO 16889||CST Rating*|
* CST: Cyclic Stabilization Test to determine filter rating under stress conditions, based on SAE ARP4205
|OMIT||No Special Options|
|P001||Tested with Fyrquel® Fluid|
|P002||Industrial Lighting Scheme|