Claris® Polypropylene Depth Filter Cartridges

For Consistent, Reliable Filtration at an Economical Cost

Claris melt blown depth filter cartridges offer coarser ratings for primary or pre-filtration applications and higher fluid flow applications where cleanliness levels are not specified. When used in industrial applications, these spunbond depth filter cartridges are for general particulate reduction and less sensitive component protection at temperatures less than 60 °C (140°F).

Claris® Nominal Depth Pleated Filter Cartridges | Pall Shop

Order Products

Product ID: CLR1019840
Product ID
Unit of Measure
24/EA
Min Order Qty
24
Claris® Filter Cartridges, Removal Rating 10 μm, Polypropylene, Length 19.5 inches product photo
Product ID: CLR10195
Product ID
Unit of Measure
24/EA
Min Order Qty
24
Micron 10 micron
Length 49.5 cm / 19.5 in
Product ID: CLR10010892
Product ID
Unit of Measure
36/EA
Min Order Qty
36
Media Material Polypropylene
Nominal Outer Diameter 2.5 in
Nominal Length 10 in
Claris® Depth Filter CLR10295 product photo
Product ID: CLR10295
Product ID
Unit of Measure
12/EA
Min Order Qty
12
Media Material Polypropylene
Hardware Material Polypropylene
Removal Rating 10 µm
Removal Efficiency nominal
See All Attributes
Product ID: CLR1020M7S
Product ID
Unit of Measure
12/EA
Min Order Qty
12
Media Material Polypropylene
O-ring/Seal/Gasket Material Silicone
Removal Rating 10 µm
Nominal Outer Diameter 2.5 in
See All Attributes
Claris® Filter Cartridge, CLR1020W480 product photo
Product ID: CLR1020W480
Product ID
Unit of Measure
24/EA
Min Order Qty
24
Claris® Filter Cartridges, Removal Rating 10 μm, Polypropylene, Length 29.25 inches product photo
Product ID: CLR102925
Product ID
Unit of Measure
12/EA
Min Order Qty
12
Micron 10 micron
Length 74.3 cm / 29.25 in
Claris® Filter Cartridge, CLR1030M7WS480 product photo
Product ID: CLR1030M7WS480
Product ID
Unit of Measure
12/EA
Min Order Qty
12
Product ID: CLR1030M7S
Product ID
Unit of Measure
12/EA
Min Order Qty
12
Media Material Polypropylene
O-ring/Seal/Gasket Material Silicone
Removal Rating 10 µm
Nominal Outer Diameter 2.5 in
See All Attributes
Product ID: CLR1030M3E
Product ID
Unit of Measure
12/EA
Min Order Qty
12
Media Material Polypropylene
O-ring/Seal/Gasket Material EPDM
Removal Rating 10 µm
Nominal Outer Diameter 2.5 in
See All Attributes
Product ID: CLR1010W480
Product ID
Unit of Measure
36/EA
Min Order Qty
36
Media Material Polypropylene
Hardware Material Polypropylene
O-ring/Seal/Gasket Material Not Applicable
Removal Rating 10 µm
See All Attributes
Product ID: CLR1030H21
Product ID
Unit of Measure
12/EA
Min Order Qty
12
Media Material Polypropylene
Removal Rating 10 µm
Nominal Outer Diameter 2.5 in
Nominal Length 30 in
See All Attributes
186 Items

Description

Why choose Claris depth filter cartridges?

These cartridges are an economical option to achieve consistent filter performance, reliability and strength (alternative to molded cores) without compromising filter integrity or media depth.

 

Additional benefits include:

 

  • Easy and safe cartridge incineration and disposal
  • Capable of coarser ratings
  • No surfactants, binders, anti-static agents, or adhesives

Product Highlights:

  • The most economical melt blown depth filter cartridge
  • All polypropylene construction
  • Long service life
  • Produced according to quality ISO standards
  • Various assembly end configurations are available to match housing internals 

Applications

Chemicals and Polymers

  • Chemicals – Intermediate product (other), raw material (gas, air, liquid) and final product (liquid)
  • Petrochemicals – Amine, Benfield and other solvent loops

Food and Beverage

  • Bottled Water – Incoming water primary filtration, particulate control and pre-RO filtration
  • Soft Drinks – Incoming water primary filtration, particulate control and pre- RO filtration
  • Beer (corporate)– Particle filtration
  • Juice – Water filtration

Oil and Gas

  • Upstream – Injection water and SRU
  • Midstream – LNG acid gas, acid gas, glycol filtration and process water
  • Refinery – Amine systems

Microelectronics

  • Photovoltaics – Waste reclaim and wet etch and cleans

Power and Utilities

  • Combined Cycle Plants – Turbine lubrication

Industrial Manufacturing

  • Automotive – Filling lines/filling stations, parts washing, pre-treatment and e-coat, sealant, paint and coatings, stamping and test stands
  • Mining Equipment – Fuel filtration (on and off-board), gear case, hydraulic fluid, lube oil (on and off-board), final product (post smelt/burn off impurities), slurry, wastewater and rinsing water

Specifications

Documents

Data Sheet

  • Claris Filter Cartridges for General Purpose Particle Reduction

    Select Language :
    English

  • 1251-10C - Claris® Series Filter Cartridges

    Select Language :
    English