HYDRO-GUARD® K Series Backflushable Filter Cartridges product photo Primary L

HYDRO-GUARD® K Series Backflushable Filter Cartridges

The most extensively used backflushable pleated filter in power plant condensate.

  • Backflushable pleated filter designed specifically for use in power plants
  • The Hydro-Guard K is used in condensate with or without resin precoat
  • Constructed with the highest purity materials (no fillers, talcs, TiO2 or surfactants) for minimal rinse-up time
  • Surface area exceeds that of conventional condensate filters by a 20:1 ratio for lower pressure drops, increased filter life and longer backflush cycles
  • Eliminates costs associated with use and disposal of powdered resins
  • Iron oxide and suspended copper are typically reduced by 98%+
  • Absolute construction and surface retention for efficient backflushing and particle removal


Contact Us
* Required

Documents

Datasheets

Download: English

Description

The most extensively used backflushable pleated filter in power plant condensate.

  • Backflushable pleated filter designed specifically for use in power plants
  • The Hydro-Guard K is used in condensate with or without resin precoat
  • Constructed with the highest purity materials (no fillers, talcs, TiO2 or surfactants) for minimal rinse-up time
  • Surface area exceeds that of conventional condensate filters by a 20:1 ratio for lower pressure drops, increased filter life and longer backflush cycles
  • Eliminates costs associated with use and disposal of powdered resins
  • Iron oxide and suspended copper are typically reduced by 98%+
  • Absolute construction and surface retention for efficient backflushing and particle removal

Specifications

Filter Media: Polyaramid
Support Material: Polyester
Hardware: Stainless Steel
Sealing: Epoxy Resin
Gasket/O-ring Materials: EPDM (standard),
Others available
 

Pressure Drop/Flow Data

Type

Filter Cartridges

Ordering Information

HGK - ■ - ● - A - E - DOE - EDF - R

(e.g. HGK–1–725–A–E–DOE-EDF-R)

 
Code Filter Grades*
1 1 μm
5 5 μm
 

*Based on typical application usage.
For details, contact Pall Corporation.

 
Code   Cartridge Lengths
(nominal)
475 19” (47.5 cm)
725 28.5” (72.5 cm)
 
 
Code Gasket/O-ring
Materials
E EPDM
 
 
Code                    End Configurations
DOE DOE with elastomer
gasket seal and endcaps
EDF Manufactured to EDF specifications
R Pre-rinsed in hot DI water to reduce rinse up time
 

Reviews

We appreciate your review of this product. Please login to your account to leave a review.