Scalability is critical to safe and reliable process development, and the Supracap 100 capsule integrates seamlessly into any development process with its versatile configurations, sizes, and available filter media.
With the Supracap 100 capsule, scalability from just a few liters to full process depth filter modules can be easily achieved. The fully disposable design eliminates any cleaning or handling concerns usually associated with housings, especially where biological and hazardous products are to be filtered. Furthermore, the Supracap 100 depth filter capsule is designed to provide cost-effectiveness, flexibility, and ease of use while minimizing the exposure risk for operators.
Supracap 100 capsules can be manifolded together as well with any other Kleenpak™ Nova Capsule Filter in the Pall portfolio.
Supracap 100 capsules are especially suited to process development and pilot-scale applications. They can be autoclaved and used for various critical applications depending upon the filter media selected. These applications may include cell harvest clarification and protection of sterilizing membranes.
Please try searching again using our guidelines below:
Scalability is critical to safe and reliable process development, and the Supracap 100 capsule integrates seamlessly into any development process with its versatile configurations, sizes, and available filter media.
With the Supracap 100 capsule, scalability from just a few liters to full process depth filter modules can be easily achieved. The fully disposable design eliminates any cleaning or handling concerns usually associated with housings, especially where biological and hazardous products are to be filtered. Furthermore, the Supracap 100 depth filter capsule is designed to provide cost-effectiveness, flexibility, and ease of use while minimizing the exposure risk for operators.
Supracap 100 capsules can be manifolded together as well with any other Kleenpak™ Nova Capsule Filter in the Pall portfolio.
Supracap 100 capsules are especially suited to process development and pilot-scale applications. They can be autoclaved and used for various critical applications depending upon the filter media selected. These applications may include cell harvest clarification and protection of sterilizing membranes.
Supracap 100 capsules are available with either in-line or T-style configuration. The T-style design is ideally suited for manifolding multiple capsules in series or in a parallel configuration. Supracap 100 capsules are available in 127mm (5 in.), 254 mm (10 in), 508 mm (20 in.), and 762 mm (30 in.) lengths. The extensive range of the Seitz depth filter sheet portfolio is available. This includes*:
* Others available upon request
Supracap 100 filter capsules are available with various inlet and outlet connections, including sanitary flange and hose barb.
Supracap 100 capsules have been designed to meet industry requirements, including autoclaving and low extractables. They offer high flow rates and throughputs and are designed to have minimal hold-up volumes. The translucent shell makes venting and draining easier as liquid levels are visible.
| Maximum Operating Temperature |
40 °C |
| Maximum Operating Pressure | 3 barg (44 psig) at 40 °C |
* With compatible fluids that do not soften, swell or adversely affect the product or its materials of construction.
| Housing Bowl | Polypropylene |
| Housing Head* | Polypropylene |
| O Rings | Silicone elastomer |
* Formulated with TiO2 whitener which does not contribute to organic extractables
| Autoclave | Maximum temperature of 125 oC for 1 hour |
| Code | Depth Filter Type | Typical Water Permeability in L/min/m2 @ Δp 1 bar (14.5 psid) |
Nominal Retention Ratings in µm | Typical Ash Content in % | Endotoxin Level in EU/mL before Rinsing |
|---|---|---|---|---|---|
| PDD1* | PDD1 | <span"> 25 | 0.1-0.85 | 52 | <0.06 |
| PDE2* | PDE2 | 35 | 0.2-3.5 | 47 | <0.06 |
| PDH4* | PDH4 | 93 | 0.5-15.0 | 45 | <0.06 |
| PDK5* | PDK5 | 151 | 1.5-20.0 | 45 | <0.06 |
| PDK7 | PDK7 | 463 | 3 - 20 | 45 | <0.06 |
| PDP8 | PDP8 | 1010 | 6 - 30 | 39 | <0.06 |
| PEKX | EKXP | 24 | 0.05 – 0.2 | 62 | <0.06 |
| PEKS | EKSP | 29 | 0.1-0.3 | 58 | <0.06 |
| PEKM | EKMP | 41 | 0.2-0.5 | 48 | <0.06 |
| PEK1 | SUPRA EK1P | 64 | 0.2-0.5 | 47 | <0.06 |
| P050 | KS 50P | 93 | 0.4-0.8 | 46 | <0.06 |
| P080 | SUPRA 80P | 159 | 1.0-3.0 | 49 | <0.06 |
| P100 | K100P | 149 | 1.0-3.0 | 45 | <0.06 |
| V100 | V100P | 170 | 2.0 – 4.0 | 52 | <0.06 |
| P200 | K200P | 217 | 3.0-6.0 | 43 | <0.06 |
| P250 | K250P | 535 | 4.0-9.0 | 44 | <0.06 |
| P700 | K700P | 935 | 6.0-15.0 | 45 | <0.06 |
| P900 | K900P | 1980 | 8.0-20.0 | 45 | <0.06 |
| B010 | BIO 10 | 30 | 0.2-0.4 | <1 | <0.06 |
| B020 | BIO 20 | 75 | 0.4-1.0 | <1 | <0.06 |
* HP version
Media Grade Codes for Stax™, Supracap™ and Supradisc™ Modules
A dual layer media grade is a combination of two single layer media grades. The media grade code starts with P (Pharmaceutical Grade) followed by D (Dual layer) and the appropriate dual media combination ID. For generating a dual media combination ID, the appropriate top sheet grade letter (columns) is combined with the bottom sheet grade number or “x” (lines).
| In-line | NP5 | NP6 | NP7 | NP8 |
|---|---|---|---|---|
| Maximum diameter including valves | 154 mm (6.1 in.) |
154 mm (6.1 in.) |
154 mm (6.1 in.) |
154 mm (6.1 in.) |
| Length with hose barb inlet/outlet | 154 mm (6.1 in.) |
397 mm (15.6 in.) |
644 mm (25.4 in.) |
895 mm (35.2 in.) |
| Length with sanitary inlet/outlet | 213 mm (8.4 in.) |
335 mm (13.2 in.) |
584 mm (23.0 in.) |
834 mm (32.8 in.) |
| T-Style | NT5 | NT6 | NT7 | NT8 |
|---|---|---|---|---|
| Maximum diameter including valves | N/A | 240 mm (9.5 in.) |
240 mm (9.5 in.) |
240 mm (9.5 in.) |
| Length | N/A | 349 mm (13.7 in.) |
598 mm (23.5 in.) |
848 mm (33.4 in.) |
| NP5 | N*6 | N*7 | N*8 | |
|---|---|---|---|---|
| Single layer | 0.05 m2 (0.54 ft2) |
0.1 m2 (0.97 ft2) |
0.2 m2 (1.9 ft2) |
0.3 m2 (2.9 ft2) |
| HP version | 0.025 m2 (0.27 ft2) |
0.05 m2 (0.54 ft2) |
0.10 m2 (1.08 ft2) |
0.15 m2 (1.61 ft2) |
| Capsule Length | NP (mL) | NT (mL) |
|---|---|---|
| 127 mm (5 in.) | 652 | N/A |
| 254 mm (10 in.) | 1125 | 1160 |
| 508 mm (20 in.) | 2291 | 2578 |
| 762 mm (30 in.) | 3399 | 3747 |
1 Void volume is defined as amount of liquid required to fill entire capsule with cartidge installed inside.
All part numbers ending in “1” have a 1 – 1½ in. sanitary flange inlet and outlet. All part numbers ending in “6” have a 13 mm (½ in) hose barb inlet and outlet. All part numbers ending in “7” have a 6 mm (¼ in.) hose barb inlet and outlet.
Please talk to Pall representative regarding your requirements so we can provide a suitable product for your application.
