Supradisc™ II Modules

The Next Generation in Depth Filter Module Technology

 

Constantly increasing process demands in the Biopharmaceutical industry has driven Pall Corporation to develop the Supradisc II PP depth filter module. The Supradisc II design combines the filtration performance of Seitz® media and the structural robustness of interlocking dual drainage plates. This provides the most robust design available in the market today. The dual drainage plate design of the Supradisc II PP depth filter module optimizes the flow distribution by providing unobstructed process flow. These advancements in module design also enhance module integrity as well as superior resistance to back pressure failures of the filter media.

Order Products

Industries

Industrial Manufacturing

SUPRAdisc SD II EK 1 200XEK1S232SP product photo

SUPRAdisc SD II EK 1 200XEK1S232SP

Product ID: 7005243
Unit of Measure
1/STK
Min Order Qty
1

Documents

Datasheets

 

Regulatory/Quality Documentation

Description

The Next Generation in Depth Filter Module Technology

 

Constantly increasing process demands in the Biopharmaceutical industry has driven Pall Corporation to develop the Supradisc II PP depth filter module. The Supradisc II design combines the filtration performance of Seitz® media and the structural robustness of interlocking dual drainage plates. This provides the most robust design available in the market today. The dual drainage plate design of the Supradisc II PP depth filter module optimizes the flow distribution by providing unobstructed process flow. These advancements in module design also enhance module integrity as well as superior resistance to back pressure failures of the filter media.

 

Pall SUPRAdisc II features

 

 
  • Interlocking and welded drainage plates provide similar structural integrity as found with most filter cartridge cage and core assemblies
  • Highest structural robustness due to dual drainage plates
  • Filter media is less susceptible to blinding from media-to-media contact within the module assembly
  • Unobstructed process flow
  • Optimized flow distribution upstream and downstream of the filter sheets maximizes filter utilization
  • Fully supported filter sheets inhibit the rupturing of filter media frequently associated with back pressure
  • Shipping and handling damage is significantly reduced through the very same interlocking and welded drainage plates
  • Highest packing density minimizes hold up volume
  • Supradisc II modules are steam sterilizable at 125°C for 30 minutes
  • All plastic components used in construction meet the specifications for the biological test listed in the current version of the USP Class VI 121°C
  • Supradisc II PP depth filter module and all its components are fully traceable by serial number

 

High Quality and FDA Conformity

 

The filter sheets meet the specifications set forth in the US Code of Federal Regulations Title 21, parts 177.2260 e, f, g, h, i, j, k, l. The materials for all plastic components are listed in US Code of Federal Regulations Title 21, part 177.1520.

 

With regard to food law conformity, the manufacture of depth filter sheets is also subject to ongoing analysis by the German ISEGA Forschungs- und Untersuchungsgesellschaft mbH, Aschaffenburg.

 

Technical Service

 

For best possible support and maximum reliability, we recommend performing filter evaluations utilizing your process and process conditions. Pall’s specialists can provide valuable support, either at your facility or in our SLS (Scientific and Laboratory Services) laboratories, providing hands-on assistance and placing its extensive technical  resources at your disposal in the form of worldwide technical advice, including problem solving, process review and cost reduction programs.

 

Further Information

 

Further information is available on Pall's range of Filter Modules and Capsules with Seitz Depth Filter Media.

Specifications

Operating Characteristics*

 

Maximum Operating Temperature  80 °C
Maximum Operating Pressure  2.4 bard (35 psid)

* With compatible fluids, which do not soften, swell or adversely affect the products or its material of construction.

 

Materials of Construction

 

 Pall Supradisc II Components  Polypropylene
 O-rings  Platinum cured silicone elastomer

 

Sterilization

 

 Steam in Place  125 °C for 30 minutes at 0.3 bard (4.3 psid) maximum

 

Nominal Dimensions

 

Total Length:
  Double O-ring
  Flat Gasket


332 mm (13.1 in.)
272 mm (10.7 in.)

Total  Diameter 284 mm (12 in.) in 232 design
410 mm (16 in.) in 440 design 
 Filter Area

1.8 m2 (19.4 ft2) in 232 design
5.0 m2 (53.8 ft2) in 440 design

 

Filter Media Specification

 

Code Depth Filter Type Typical Water
Permeability
in L/min/m2
@ Δp 1 bar (14.5 psid)
Nominal Retention Rating in µm Ash Content in % Endotoxin Level
in EU/mL
before Rinsing
 PEKS  EKSP  29  0.1-0.3  58  <0.06
 PEKM  EKMP  41  0.2-0.5  48  <0.06
 PEK1  SUPRA EK1P  64  0.2-0.5  47  <0.06
 P050  KS 50P  93  0.4-0.8  46  <0.06
 P080  SUPRA 80P  159  1.0-3.0  49  <0.06
 P100  K100P  149  1.0-3.0  45  <0.06
 P200  K200P  217  3.0-6.0  43  <0.06
 P250  K250P  535  4.0-9.0  44  <0.06
 P700  K700P  935  6.0-15.0  45  <0.06
 P900  K900P  1980  8.0-20.0  45  <0.06
 B010  BIO 10  30  0.2-0.4  <1  <0.06
 B020  BIO 20  75  0.4-1.0  <1  <0.06
 XEK1  EK1  41  0.2-0.4  51  NA
 XEK  EK  68  0.3-0.5  46  NA
 X050  KS50  93  0.4-0.8  46  NA
 X080  KS80  113  0.6-2.0  46  NA
 X100  K100  146  1.0-3.0  46  NA
 X150  K150  185  2.5-4.0  46  NA
 X200  K200  213  3.0-6.0  46  NA
 X250  K250  510  4.0-9.0  46  NA
 X300  K300  785  5.0-12.0  46  NA
 X700  K700  925  6.0-15.0  46  NA
 X900  K900  1700  8.0-20.0  46  NA
 T950  T950  1700  8.0-20.0  40  NA
 T100  T1000  3400  10-25  35  NA
 T150  T1500  7285  11-30  33  NA
 T210  T2100  10200  13-35  13  NA
 T260  T2600  10200  15-40  <1  NA
 T350  T3500  12750  19-50  13  NA
 T550  T5500  25500  25-70  <1  NA

NA - Not Applicable as endotoxin content is not a measured criteria for these sheets.

 

Ordering Information

Pall SUPRAdisc II Depth Filter Modules

 

 

Please talk to Pall representative regarding your requirements so we can provide a suitable product for your application.